Building Product Specifications (First edition, Amendment 1)
- Abbreviation
- BPS (First edition, Amendment 1)
- Amendment
- Amendment 1
- Version
- First edition
- Valid from
- 2/04/2026
- Information provider
- Ministry of Business, Innovation and Employment,
- Information type
- Material specification,
- Format
- PDF,
Description
This document, the Building Product Specifications First Edition Amendment 1 amends the Building Product Specifications First Edition under section 25B(3) of the Building Act 2004 and is the current and amended version effective on 2 April 2026.
The amendment 1 contains additional specifications for:
- Wall bracing elements
- Fire doors and fire resisting glazing
Amendment 1 also contains additional general text on the compatibility of products and systems.
This edition contains specifications and standards related to the following building products:
- Engineered fill used in site works
- Concrete, including reinforcement
- Steel
- Timber
- Cladding
- Windows, external doors and glazing
- Insulation
- Gypsum plasterboard (when used as a bracing element in wall linings)
- Heating, ventilation and air conditioning (HVAC) systems
It also contains requirements for fire characteristics of building products and materials.
Some sections contain no specifications in this version but are reserved for future use.
Scope
This document includes specifications for building products that can be used with an acceptable solution or verification method to achieve compliance with the Building Code. This includes specifications for building products in relation to their manufacture, fabrication, testing, quality control, physical properties, performance, installation, and/or maintenance.
Any geographical scope requirements for overseas product standards must be demonstrated to be within the scope of requirements appropriate for the location of the building.
Items outside the scope of the document
This document does not include information relating to design or construction methods, when or how building products should be used to demonstrate compliance with the Building Code, or the scope and limitations of the use of the building products.
This resource is cited by:
Building Product Specifications (First edition, Amendment 1)
This document is CITED BY:
-
B1/AS1 (Second edition) (Second edition)
BPS (First edition, Amendment 1) is cited by Acceptable Solution B1/AS1: Structural provisions for buildings from 2/04/2026
-
B1/AS3 (Second edition) (Second edition)
BPS (First edition, Amendment 1) is cited by Acceptable Solution B1/AS3: Small Chimneys from 2/04/2026
-
B2/AS1 (Third edition) (Third edition)
BPS (First edition, Amendment 1) is cited by Acceptable Solution B2/AS1: Durability provisions for building elements from 2/04/2026
-
C/AS1 (Amd 1) (Second edition, Amendment 1)
BPS (First edition, Amendment 1) is cited by Acceptable Solution C/AS1: Protection from fire for buildings with sleeping (residential) and outbuildings (risk group SH) from 2/04/2026
-
C/AS2 (Second edition) (Second edition)
BPS (First edition, Amendment 1) is cited by Acceptable Solution C/AS2: Protection from fire for buildings other than Risk Group SH from 2/04/2026
-
E2/AS1 (Fourth edition) (Fourth edition)
BPS (First edition, Amendment 1) is cited by Acceptable Solution E2/AS1: External moisture provisions for timber-framed buildings up to 10 m in height from 2/04/2026
-
G4/AS1 (Fifth Edition) (Fifth edition)
BPS (First edition, Amendment 1) is cited by Acceptable Solution G4/AS1: Ventilation of buildings and gas-fuel appliances from 2/04/2026
-
H1/AS1 (Fifth edition, Amd 1) (Fifth edition, Amendment 1)
BPS (First edition, Amendment 1) is cited by Acceptable Solution H1/AS1: Energy efficiency for all housing, and buildings up to 300 m². from 2/04/2026
-
H1/AS2 (First edition, Amd 1) (First edition, Amendment 1)
BPS (First edition, Amendment 1) is cited by Acceptable Solution H1/AS2: Energy efficiency for buildings greater than 300 m². from 2/04/2026
-
B1/VM1 (Second edition) (Second edition)
BPS (First edition, Amendment 1) is cited by Verification Method B1/VM1: Structural design of buildings from 2/04/2026
-
B1/VM2 (Second edition) (Second edition)
BPS (First edition, Amendment 1) is cited by Verification Method B1/VM2: Geotechnical design of foundations from 2/04/2026
-
C/VM2 (Second edition) (Second edition)
BPS (First edition, Amendment 1) is cited by Verification Method C/VM2: Framework for Fire Safety Design from 2/04/2026
-
E2/VM1 (Fourth edition) (Fourth edition)
BPS (First edition, Amendment 1) is cited by Verification Method E2/VM1: Cladding systems of buildings up to 10 m in height – including junctions with windows, doors and other penetrations from 2/04/2026
-
H1/VM1 (Fifth edition, Amd 1) (Fifth edition, Amendment 1)
BPS (First edition, Amendment 1) is cited by Verification Method H1/VM1: Energy efficiency for all housing, and buildings up to 300 m². from 2/04/2026
-
H1/VM2 (First edition, Amd 1) (First edition, Amendment 1)
BPS (First edition, Amendment 1) is cited by Verification Method H1/VM2: Energy efficiency for buildings greater than 300 m². from 2/04/2026
-
H1/VM3 (First edition, Amd 1) (First edition, Amendment 1)
BPS (First edition, Amendment 1) is cited by Verification Method H1/VM3: Energy efficiency of HVAC systems in commercial buildings. from 2/04/2026
This resource cites:
Building Product Specifications (First edition, Amendment 1)
This document CITES:
BPS (First edition, Amendment 1) cites AS 1905.1:2015 Components for the protection of openings in fire-resistant walls - Part 1: Fire-resistant doorsets from 2/04/2026
BPS (First edition, Amendment 1) cites AS/NZS 1163:2016 Cold-formed structural steel hollow sections
BPS (First edition, Amendment 1) cites AS/NZS 1594:2002 (R2016) Hot-rolled steel flat products
BPS (First edition, Amendment 1) cites AS/NZS 1604.1:2021 Preservative-treated wood-based products - Part 1: Products and treatment
BPS (First edition, Amendment 1) cites AS/NZS 1604.3:2002 Specification for preservative treatment - Plywood
BPS (First edition, Amendment 1) cites AS/NZS 1604.3:2012 Specification for preservative treatment - Part 3: Plywood
BPS (First edition, Amendment 1) cites AS/NZS 1604.4:2002 Specification for preservative treatment - Part 4: Laminated veneer lumber (LVL)
BPS (First edition, Amendment 1) cites AS/NZS 1604.4:2012 Specification for preservative treatment - Part 4: Laminated veneer lumber (LVL)
BPS (First edition, Amendment 1) cites AS/NZS 1604.5:2002 Specification for preservative treatment - Part 5: Glued laminated timber products
BPS (First edition, Amendment 1) cites AS/NZS 1604.5:2012 Specification for preservative treatment - Part 5: Glued laminated timber products
BPS (First edition, Amendment 1) cites AS/NZS 2588:2018 Gypsum plasterboard
BPS (First edition, Amendment 1) cites AS/NZS 2908.2:2000 Cellulose-cement products - Part 2: Flat sheets
BPS (First edition, Amendment 1) cites AS/NZS 3666.1:2011 Air-handling and water systems of buildings - Microbial Control - Design, installation and commissioning
BPS (First edition, Amendment 1) cites AS/NZS 3666.2:2011 Air-handling and water systems of buildings - Microbial Control - Operation and maintenance
BPS (First edition, Amendment 1) cites AS/NZS 3678:2016 Structural steel - Hot-rolled plates, floorplates and slabs
BPS (First edition, Amendment 1) cites AS/NZS 3679.1:2016 Structural steel - Part 1: Hot-rolled bars and sections
BPS (First edition, Amendment 1) cites AS/NZS 3679.2:2016 Structural steel - Part 2: Welded I-sections
BPS (First edition, Amendment 1) cites AS/NZS 3837:1998 (R216) Method of test for heat and smoke release rates for materials and products using an oxygen consumption calorimeter
BPS (First edition, Amendment 1) cites AS/NZS 4666:2012 Insulating glass units
BPS (First edition, Amendment 1) cites AS/NZS 4671:2019 Steel for the reinforcement of concrete
BPS (First edition, Amendment 1) cites AS/NZS 4680:2006 (R2017) Hot-dip galvanised (zinc) coatings on fabricated ferrous articles
BPS (First edition, Amendment 1) cites AS/NZS 4859.1:2018 Thermal insulation materials for buildings, Part 1: General criteria and technical provisions
BPS (First edition, Amendment 1) cites CAN/ULC S104:2015 (R2025) Standard Method for Fire Tests of Door Assemblies from 2/04/2026
BPS (First edition, Amendment 1) cites NZS 3112.2:1986 Methods of test for concrete - Tests relating to the determination of strength of concrete - SPONSORED
BPS (First edition, Amendment 1) cites NZS 3404 Parts 1 and 2:1997 Steel structures standard - SPONSORED
BPS (First edition, Amendment 1) cites NZS 3602:2003 Timber and wood-based products for use in building - SPONSORED
BPS (First edition, Amendment 1) cites NZS 3604:2011 Timber-framed buildings - SPONSORED
BPS (First edition, Amendment 1) cites NZS 3605:2001 Timber piles and poles for use in building - SPONSORED
BPS (First edition, Amendment 1) cites NZS 3640:2003 Chemical preservation of round and sawn timber - SPONSORED
BPS (First edition, Amendment 1) cites NZS 4211:2008 Specification for performance of windows - SPONSORED
BPS (First edition, Amendment 1) cites NZS 4223.1:2008 Code of practice for glazing in buildings - Glass selection and glazing - SPONSORED
BPS (First edition, Amendment 1) cites NZS 4223.2:2016 Glazing in buildings Part 2: Insulating glass units - SPONSORED
BPS (First edition, Amendment 1) cites NZS 4223.3:2016 Glazing in buildings - Human impact safety requirements - SPONSORED
BPS (First edition, Amendment 1) cites NZS 4232.2:1988 Performance criteria for fire resisting enclosures - Fire resisting glazing systems - SPONSORED
BPS (First edition, Amendment 1) cites NZS 4431:2022 Engineered fill construction for lightweight structures - SPONSORED
BPS (First edition, Amendment 1) cites NZS 4520:2010 Fire resistant doorsets - SPONSORED
BPS (First edition, Amendment 1) cites NZS/AS 1530.1:1994 (R2016) Methods for fire tests on building materials, components and structures - Part 1: Combustibility test for materials
BPS (First edition, Amendment 1) cites NZS/BS 476.21:1987 Fire tests on building materials and structures - Methods for determination of the fire resistance of loadbearing elements of construction
BPS (First edition, Amendment 1) cites NZS/BS 476.22:1987 Fire tests on building materials and structures -Methods for determination of the fire resistance of non-loadbearing elements of construction
BPS (First edition, Amendment 1) cites SNZ TS 4211:2022 Classification for the performance of windows - SPONSORED
BPS (First edition, Amendment 1) cites UL 10B:2020 Standard for Fire Tests of Door Assemblies from 2/04/2026
BPS (First edition, Amendment 1) cites UL 10C:2021 (R2026) Positive Pressure Fire Tests of Door Assemblies from 2/04/2026
BPS (First edition, Amendment 1) cites UL 9:2009 Standard for Fire Tests of Window Assemblies from 2/04/2026
BPS (First edition, Amendment 1) cites AS 1012.14:2018 Methods of testing concrete - Part 14: Method for securing and testing cores from hardened concrete for compressive strength and mass per unit volume
BPS (First edition, Amendment 1) cites AS 1012.1:2014 Methods of testing concrete - Part 1: Sampling of concrete
BPS (First edition, Amendment 1) cites AS 1012.8.1:2014 Methods of testing concrete. Method for making and curing concrete - Compression and indirect tensile test specimens
BPS (First edition, Amendment 1) cites AS 1012.9:2014 Methods of testing concrete - Part 9: Compressive strength tests - Concrete, mortar and grout specimens.
BPS (First edition, Amendment 1) cites AS 1288:2021 Glass in buildings - Selection and installation
BPS (First edition, Amendment 1) cites AS 1289.5.4.3-2006 (R2016) Methods of testing soils for engineering purposes Soil compaction and density tests - Compaction control test - Dry density ratio and moisture ratio using statistical selection of reference values.
BPS (First edition, Amendment 1) cites AS 1366.1-1992 (R2018) Rigid cellular plastics sheets for thermal insulation - Rigid cellular polyurethane (RC/PUR)
BPS (First edition, Amendment 1) cites AS 1366.2-1992 (R2018) Rigid cellular plastics sheets for thermal insulation - Rigid cellular polyisocyanurate (RC/PIR)
BPS (First edition, Amendment 1) cites AS 1366.3-1992 (R2018) Rigid cellular plastics sheets for thermal insulation - Rigid cellular polystyrene - moulded (RC/PS-M)
BPS (First edition, Amendment 1) cites AS 1366.4-1989 (R2018) Rigid cellular plastics sheets for thermal insulation - Rigid cellular polystyrene - extruded (RC/PS-E)
BPS (First edition, Amendment 1) cites AS 1397-2011 Continuous hot-dip metallic coated steel sheet and strip - Coatings of zinc and zinc alloyed with aluminium and magnesium
BPS (First edition, Amendment 1) cites AS 1397:2021 Continuous hot-dip metallic coated steel sheet and strip - Coatings of zinc and zinc alloyed with aluminium and magnesium
BPS (First edition, Amendment 1) cites AS 1530.1-1994 (R2016) Methods for fire tests on building materials, components and structures. Combustibility test for materials
BPS (First edition, Amendment 1) cites AS 1530.2-1993 (R2016) Methods for fire tests on building materials, components and structures. Part 2: Test for flammability of materials
BPS (First edition, Amendment 1) cites AS 1530.4-2005 Methods for fire tests on building materials, components and structures. Part 4: Fire-resistance test of elements of construction
BPS (First edition, Amendment 1) cites AS 1530.4:2014 Methods for fire tests on building materials, components and structures. Part 4: Fire-resistance tests for elements of construction
BPS (First edition, Amendment 1) cites AS 1682.1-1990 Fire dampers - Part 1: Specification
BPS (First edition, Amendment 1) cites AS 1682.1:2015 Fire, smoke and air dampers - Part 1: Specification
BPS (First edition, Amendment 1) cites AS 1682.2-1990 Fire dampers - Part 2: Installation
BPS (First edition, Amendment 1) cites AS 1682.2:2015 Fire, smoke and air dampers - Part 2: Installation
BPS (First edition, Amendment 1) cites AS 2047-2014 + A2:2017 Windows and external glazed doors in buildings
BPS (First edition, Amendment 1) cites AS 3818.10-2010 Timber - Heavy structural products - Part 10: Visually graded Building poles.
BPS (First edition, Amendment 1) cites AS 3818.3-2010 Timber - Heavy structural products - Part 3: Visually graded Piles
BPS (First edition, Amendment 1) cites AS 4072.1-2005 (R2016) Components for the protection of openings in fire-resistant separating elements. Part 1: Service penetrations and control joints
BPS (First edition, Amendment 1) cites AS 4254.1-2012 Ductwork for air-handling systems in buildings. Part 1: Flexible duct
BPS (First edition, Amendment 1) cites AS 4254.2-2012 Ductwork for air-handling systems in buildings. Part 2: Rigid duct
BPS (First edition, Amendment 1) cites AS 5113:2016 (+A1:2018) Fire propagation testing and classification of external walls of buildings
BPS (First edition, Amendment 1) cites AS 5637.1:2015 Determination of fire hazard properties. Part 1: Wall and ceiling linings
BPS (First edition, Amendment 1) cites AS ISO 9705-2003 (R2016) Fire tests - Full-scale room test for surface products
BPS (First edition, Amendment 1) cites ASTM E119-20 Standard Test Methods for Fire Tests of Building Construction and Materials from 2/04/2026
BPS (First edition, Amendment 1) cites UL 263:2011 (R2025) Fire Tests of Building Construction and Materials from 2/04/2026
BPS (First edition, Amendment 1) cites AASHTO T 224-10 Standard Method of Test for Correction for Coarse Particles in the Soil Compaction Test
BPS (First edition, Amendment 1) cites ASTM A706/A706M-24 Standard specification for deformed and plain low-alloy steel bars for concrete reinforcement.
BPS (First edition, Amendment 1) cites ASTM C1363-24 Standard Test Method for Thermal Performance of Building Materials and Envelope Assemblies by Means of a Hot Box Apparatus
BPS (First edition, Amendment 1) cites ASTM C1396/C1396M-24 Standard Specification for Gypsum Board
BPS (First edition, Amendment 1) cites ASTM C1667-15 (2023) Standard Test Method for Using Heat Flow Meter Apparatus to Measure the Center-of-Panel Thermal Transmission Properties of Vacuum Insulation Panels
BPS (First edition, Amendment 1) cites ASTM C177-19e1 Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus
BPS (First edition, Amendment 1) cites ASTM C518-21 Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus
BPS (First edition, Amendment 1) cites ASTM C687-24 Standard Practice for Determination of Thermal Resistance of Loose-Fill Building Insulation
BPS (First edition, Amendment 1) cites ASTM D2898-10 Standard Practice for Accelerated Weathering of Fire-retardant Treated Wood for Fire Testing
BPS (First edition, Amendment 1) cites ASTM D4718/D4718M-15(2023) Standard Practice for Correction of Unit Weight and Water Content for Soils Containing Oversize Particles
BPS (First edition, Amendment 1) cites ASTM D5874-24 Standard Test Methods for Determination of the Impact Value (IV) of a Soil
BPS (First edition, Amendment 1) cites ASTM E2098-00 Standard Test Method for Determining Tensile Breaking Strength of Glass Fibre Reinforcing Mesh for Use in Class PB Exterior Insulation and Finish Systems (EIFS), after Exposure to a Sodium Hydroxide Solution
BPS (First edition, Amendment 1) cites ASTM E2098/E2098M-13 Standard Test Method for Determining Tensile Breaking Strength of Glass Fiber Reinforcing Mesh for Use in Class PB Exterior Insulation and Finish Systems (EIFS), after Exposure to a Sodium Hydroxide Solution
BPS (First edition, Amendment 1) cites ASTM E2098/E2098M-25 Standard Test Method for Determining Tensile Breaking Strength of Glass Fiber Reinforcing Mesh for Use in Exterior Insulation and Finish Systems (EIFS) and EIFS with Drainage Systems, after Exposure to a Sodium Hydroxide Solution
BPS (First edition, Amendment 1) cites ASTM E2134 - 01 (2006) Standard Test Method for Evaluating the Tensile-Adhesion Performance of an Exterior Insulation and Finish System (EIFS)
BPS (First edition, Amendment 1) cites ASTM E2134/E2134M-14(2018) Standard Test Method for Evaluating the Tensile-Adhesion Performance of an Exterior Insulation and Finish System (EIFS)
BPS (First edition, Amendment 1) cites AWPA Standard U1-24 - Use Category System: User Specification for Treated Wood
BPS (First edition, Amendment 1) cites BR 135 (2013) - Fire performance of external thermal insulation for walls of multistorey buildings: Third edition
BPS (First edition, Amendment 1) cites BS 8414-1:2015+A1:2017 Fire performance of external cladding systems. Test method for non-loadbearing external cladding systems applied to the masonry face of a building
BPS (First edition, Amendment 1) cites BS 8414-2:2015+A1:2017 Fire performance of external cladding systems. Test method for non-loadbearing external cladding systems fixed to and supported by a structural steel frame
BPS (First edition, Amendment 1) cites BS EN 10219-1:2006 Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery requirements
BPS (First edition, Amendment 1) cites BS EN 10219-2:2019 Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 2: Tolerances, dimensions and sectional properties
BPS (First edition, Amendment 1) cites BS EN 10219-3:2020 Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 3: Technical delivery conditions for high strength and weather resistant steels
BPS (First edition, Amendment 1) cites BS EN 12101-1:2005 Smoke and heat control systems - Specification for smoke barriers
BPS (First edition, Amendment 1) cites BS EN 12467:2012+A2:2018 Fibre-cement flat sheets. Product specification and test methods
BPS (First edition, Amendment 1) cites BS EN 12667:2001 Thermal Performance of Building Materials and Products - Determination of Thermal Resistance by Means of Guarded Hot Plate and Heat Flow Meter Methods - Products of High and Medium Thermal Resistance.
BPS (First edition, Amendment 1) cites BS EN 12939:2001 Thermal Performance of Building Materials and Products - Determination of Thermal Resistance by Means of Guarded Hot Plate and Heat Flow Meter Methods - Thick Products of High and Medium Thermal Resistance.
BPS (First edition, Amendment 1) cites BS EN 13053:2019 Ventilation for buildings. Air handling units. Rating and performance for units, components and sections.
BPS (First edition, Amendment 1) cites BS EN 13501-1:2018 Fire classification of construction products and building elements. Classification using test data from reaction from fire tests.
BPS (First edition, Amendment 1) cites BS EN 14399-3:2015 High-strength structural bolting assemblies for preloading. System HR. Hexagon bolt and nut assemblies
BPS (First edition, Amendment 1) cites BS EN 14399-5:2015 High-strength structural bolting assemblies for preloading. Plain washers
BPS (First edition, Amendment 1) cites BS EN 16297-1:2012 Pumps. Rotodynamic pumps. Glandless circulators. Part 1: General requirements and procedures for testing and calculation of energy efficiency index (EEI)
BPS (First edition, Amendment 1) cites BS EN 16297-2:2012 Pumps. Rotodynamic pumps. Glandless circulators. Part 2: Calculation of energy efficiency index (EEI) for standalone circulators
BPS (First edition, Amendment 1) cites BS EN 16297-3:2012 Pumps. Rotodynamic pumps. Glandless circulators. Part 3: Energy efficiency index (EEI) for circulators integrated in products.
BPS (First edition, Amendment 1) cites BS EN 1634-1:2014+A1:2018 Fire resistance and smoke control tests for door and shutter assemblies, openable windows and elements of building hardware - Fire resistance test for door and shutter assemblies and openable windows. from 2/04/2026
BPS (First edition, Amendment 1) cites BS EN 335:2013 Durability of wood and wood-based products. Use classes: definitions, application to solid wood and wood-based products.
BPS (First edition, Amendment 1) cites BS EN 520:2004+A1:2009 Gypsum plasterboards. Definitions, requirements and test methods
BPS (First edition, Amendment 1) cites Commission Regulation (EU) No 622/2012 - Ecodesign requirements for glandless standalone circulators and glandless circulators integrated in products
BPS (First edition, Amendment 1) cites DIN 18134:2012-04 Soil - Testing procedures and testing equipment- Plate load test
BPS (First edition, Amendment 1) cites ISO 1182:2010 Reaction to fire tests for products - Non-combustibility test
BPS (First edition, Amendment 1) cites ISO 1182:2020 Reaction to fire tests for products - Non-combustibility test
BPS (First edition, Amendment 1) cites ISO 1182:2020 Reaction to fire tests for products - Non-combustibility test
BPS (First edition, Amendment 1) cites ISO 13784-1:2002 Reaction-to-fire tests for sandwich panel building systems - Test method for small rooms
BPS (First edition, Amendment 1) cites ISO 13784-1:2014 Reaction to fire test for sandwich panel building systems — Part 1: Small room test
BPS (First edition, Amendment 1) cites ISO 1461:2022 Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test methods.
BPS (First edition, Amendment 1) cites ISO 17738-1:2021 Thermal insulation products — Exterior insulation finish systems — Part 1: Materials
BPS (First edition, Amendment 1) cites ISO 21887:2007 Durability of wood and wood-based products — Use classes
BPS (First edition, Amendment 1) cites ISO 3009:2003 Fire-resistance tests – Elements of building construction – Glazed elements from 2/04/2026
BPS (First edition, Amendment 1) cites ISO 3575:2016 Continuous hot-dip zinc-coated and zinc-iron alloy-coated carbon steel sheet of commercial and drawing qualities.
BPS (First edition, Amendment 1) cites ISO 3575:2025 Continuous hot-dip zinc-coated and zinc-iron alloy-coated carbon steel sheet of commercial and drawing qualities.
BPS (First edition, Amendment 1) cites ISO 4998:2023 Steel sheet, zinc‐coated and zinc‐iron alloy‐coated by the continuous hot‐dip process, of structural quality.
BPS (First edition, Amendment 1) cites ISO 5660-1:2002 Reaction-to-fire tests - Heat release, smoke production and mass loss rate - Heat release rate (cone calorimeter method)
BPS (First edition, Amendment 1) cites ISO 5660-1:2015 Reaction-to-fire tests - Heat release, smoke production and mass loss rate. Part 1: Heat release rate (cone calorimeter method) and smoke production rate (dynamic measurement)
BPS (First edition, Amendment 1) cites ISO 5660-2:2002 Reaction-to-fire tests - Heat release, smoke production and mass loss rate - Smoke production rate (dynamic measurement)
BPS (First edition, Amendment 1) cites ISO 8301:1991 Thermal insulation - Determination of steady-state thermal resistance and related properties - Heat flow meter apparatus
BPS (First edition, Amendment 1) cites ISO 8302:1991 Thermal insulation - Determination of steady-state thermal resistance and related properties - Guarded hot plate apparatus
BPS (First edition, Amendment 1) cites ISO 8336:2017 Fibre-cement flat sheets — Product specification and test methods
BPS (First edition, Amendment 1) cites ISO 8990:1994 Thermal insulation - Determination of steady-state thermal transmission properties - Calibrated and guarded hot box
BPS (First edition, Amendment 1) cites ISO 9239-1:2010 Reaction to fire tests for floorings - Determination of the burning behaviour using a radiant heat source
BPS (First edition, Amendment 1) cites ISO 9364:2017 Steel sheet, 55 % aluminium-zinc alloy-coated by the continuous hot-dip process, of commercial, drawing and structural qualities.
BPS (First edition, Amendment 1) cites ISO 9705-1:2016 Reaction to fire tests — Room corner test for wall and ceiling lining products — Part 1: Test method for a small room configuration
BPS (First edition, Amendment 1) cites ISO 9705:1993 Fire tests - Full scale room test for surface products
BPS (First edition, Amendment 1) cites NFPA 252:2022 Standard Methods of Fire Tests of Door Assemblies from 2/04/2026
BPS (First edition, Amendment 1) cites NFPA 257:2022 Standard on Fire Test for Window and Glass Block Assemblies from 2/04/2026
BPS (First edition, Amendment 1) cites NFPA 285:2019 Standard Fire Test Method for Evaluation of Fire Propagation Characteristics of Exterior Wall Assemblies Containing Combustible Components
BPS (First edition, Amendment 1) cites A wall bracing test and evaluation procedure, P21 (2010)
BPS (First edition, Amendment 1) cites PD CEN/TS 17006:2016 Earthworks. Continuous Compaction Control (CCC)