AS/NZS 2908.2:2000 Cellulose-cement products - Part 2: Flat sheets
- Abbreviation
- AS/NZS 2908.2:2000
- Valid from
- 11/05/2000
- Information provider
- Standards New Zealand,
- Author
- Standards New Zealand, Standards Australia
- Information type
- New Zealand Standard,
- Format
- PDF, HARD COPY,
Description
This International Standard specifies the characteristics and establishes methods of control and test as well as acceptance conditions for fibre-cement flat sheets. It covers sheets intended for external applications such as cladding facades, curtain walls, soffits, lost casing, etc., and sheets intended for internal use such as partitions, floors, ceilings, etc., with a wide range of properties appropriate to the type of application. These sheets may have either a smooth or textured surface.
Scope
This Standard does not apply to the following products:
- a) boards of Portland or equivalent cement reinforced with fibrous wood particles;
- b) non-combustible fibre-reinforced boards of calcium silicate or cement for insulation and fire protection;
- c) gypsum plasterboard;
- d) asbestos-cement flat sheets;
- e) asbestos-cement slates and siding shingles;
- f) fibre-cement slates and siding shingles.
This resource is cited by:
AS/NZS 2908.2:2000 Cellulose-cement products - Part 2: Flat sheets
This document is CITED BY:
-
E2/AS1 (Amd 7) (Third Edition, Amendment 7)
AS/NZS 2908.2:2000 is cited by Acceptable Solution E2/AS1: External Moisture from 1/02/2005
-
E2/AS1 (Amd 6) (Third Edition, Amendment 6)
AS/NZS 2908.2:2000 is cited by Acceptable Solution E2/AS1: External Moisture from 1/02/2005
-
E2/AS1 (Amd 5, Errata 2) (Third Edition, Amendment 5, Errata 2)
AS/NZS 2908.2:2000 is cited by Acceptable Solution E2/AS1: External Moisture from 1/02/2005
-
E2/AS1 (Amd 5) (Third Edition, Amendment 5)
AS/NZS 2908.2:2000 is cited by Acceptable Solution E2/AS1: External Moisture from 1/02/2005
-
E2/AS1 (Amd 4) (Third Edition, Amendment 4)
AS/NZS 2908.2:2000 is cited by Acceptable Solution E2/AS1: External Moisture from 1/02/2005
-
E2/AS1 (Amd 8) (Third Edition, Amendment 8)
AS/NZS 2908.2:2000 is cited by Acceptable Solution E2/AS1: External Moisture from 1/02/2005
-
E2/AS1 (Amd 9) (Third Edition, Amendment 9)
AS/NZS 2908.2:2000 is cited by Acceptable Solution E2/AS1: External Moisture from 1/02/2005
-
E2/AS1 (Amd 10) (Third Edition, Amendment 10)
AS/NZS 2908.2:2000 is cited by Acceptable Solution E2/AS1: External Moisture from 1/02/2005
-
AS/NZS 5131:2016
AS/NZS 2908.2:2000 is cited by AS/NZS 5131:2016 Structural steelwork - Fabrication and erection
-
NASH Building Envelope Solutions: 2019
AS/NZS 2908.2:2000 is cited by NASH Building Envelope Solutions: 2019 - Light Steel Framed Buildings.
-
NZS 3602:2003
AS/NZS 2908.2:2000 is cited by NZS 3602:2003 Timber and wood-based products for use in building - SPONSORED
-
NZS 3604:1999
AS/NZS 2908.2:2000 is cited by NZS 3604:1999 Timber framed buildings - SPONSORED
-
SH/AS1 (First edition, unamended)
AS/NZS 2908.2:2000 is cited by Simple House - Acceptable Solution Revoked
-
BRANZ EM4
AS/NZS 2908.2:2000 is cited by Test Procedure for Coating and Jointing Systems for Flush Finished Fibre Cement Sheet Cladding, EM4 (2005)
This resource cites:
AS/NZS 2908.2:2000 Cellulose-cement products - Part 2: Flat sheets
This document CITES:
AS/NZS 2908.2:2000 cites ISO 2602:1980 Statistical interpretation of test results - Estimation of the mean - Confidence interval
AS/NZS 2908.2:2000 cites ISO 390:1993 Products in fibre-reinforced cement - Sampling and inspection