AS 4254.1-2012 Ductwork for air-handling systems in buildings. Part 1: Flexible duct
- Abbreviation
- AS 4254.1-2012
- Valid from
- 8/06/2012
- Information provider
- Intertek Inform,
- Author
- Standards Australia
- Information type
- Australian Standard,
- Format
- PDF, HARD COPY,
Description
This Standard specifies requirements for materials, construction and installation, including some aspects of performance, for flexible duct for air-handling systems in buildings and facilities.
Scope
This Standard covers:
- a) dimensional stability (deformation and deflection) under positive or negative pressure applications and static loads;
- b) leakage under positive or negative pressure;
- c) support; and
- d) fire hazard requirements.
This Standard does not cover the following:
- i) Noise generation and transmission.
- ii) Exposure to damage from -
- A) transportation and handling;
- B) weather and temperature extremes;
- C) flexure cycle;
- D) chemical corrosion; and
- E) other in-service conditions specific to the installation.
- iii) Impact loading, such as -
- A) fire;
- B) earthquake;
- C) sudden stoppage of airflow; and
- E) resistance to airflow.
This resource is cited by:
AS 4254.1-2012 Ductwork for air-handling systems in buildings. Part 1: Flexible duct
This document is CITED BY:
-
C/AS2 (First Edition, Amd 1 (Errata 1) (First Edition, Amendment 1 (Errata1 - 22/10/2019))
AS 4254.1-2012 is cited by Acceptable Solution C/AS2: Buildings other than Risk Group SH from 27/06/2019
-
C/AS2 (Amd 2) (First Edition, Amendment 2)
AS 4254.1-2012 is cited by Acceptable Solution C/AS2: Buildings other than Risk Group SH from 27/06/2019
-
C/AS2 (Amd 3) (First Edition, Amendment 3.)
AS 4254.1-2012 is cited by Acceptable Solution C/AS2: Buildings other than Risk Group SH from 27/06/2019
-
C/VM2 (Amd 4) (First edition, amendment 4)
AS 4254.1-2012 is cited by Verification Method C/VM2: Framework for Fire Safety Design from 19/12/2013
-
C/VM2 (Amd 5) (First edition, Amendment 5)
AS 4254.1-2012 is cited by Verification Method C/VM2: Framework for Fire Safety Design from 19/12/2013
-
C/VM2 (Amd 3) (First Edition, Amendment 3)
AS 4254.1-2012 is cited by Verification Method C/VM2: Framework for Fire Safety Design from 19/12/2013
-
C/VM2 (Amd 6) (First Edition, Amendment 6)
AS 4254.1-2012 is cited by Verification Method C/VM2: Framework for Fire Safety Design from 19/12/2013
-
C/VM2 (Amd 7) (First Edition, Amendment 7)
AS 4254.1-2012 is cited by Verification Method C/VM2: Framework for Fire Safety Design from 19/12/2013
-
H1/VM3 (First edition) (First edition, unamended)
AS 4254.1-2012 is cited by Verification Method H1/VM3: Energy efficiency of HVAC systems in commercial buildings. from 29/11/2021
-
AS 1668.1:2015
AS 4254.1-2012 is cited by AS 1668.1:2015 The use of ventilation and air conditioning in buildings - Part 1: Fire and smoke control in buildings
This resource cites:
AS 4254.1-2012 Ductwork for air-handling systems in buildings. Part 1: Flexible duct
This document CITES:
AS 4254.1-2012 cites AS/NZS 1530.3:1999 (R2016) Methods for fire tests on building materials, components and structures - Simultaneous determination of ignitability, flame propagation, heat release and smoke release
AS 4254.1-2012 cites AS/NZS 4859.1:2002 Materials for the thermal insulation of buildings - General criteria and technical provisions
AS 4254.1-2012 cites AS 1530.4-2005 Methods for fire tests on building materials, components and structures. Part 4: Fire-resistance test of elements of construction
AS 4254.1-2012 cites UL 181 ED.10 (2005) Factory-made Air Ducts And Air Connectors