Verification Method H1/VM2: Energy efficiency for buildings greater than 300 m².
- Abbreviation
- H1/VM2 (First edition, Amd 1)
- Amendment
- 1
- Version
- First edition, Amendment 1
- Valid from
- 4/08/2022
- Information provider
- Ministry of Business, Innovation and Employment,
- Information type
- Verification Method,
- Format
- PDF,
Description
The Verification Method H1/VM2 provides a means of compliance with Building Code Clause H1 Energy Efficiency.
The Verification Method H1/VM2 applies to communal residential, communal non-residential (assembly care only) and commercial buildings with a floor area of occupied space greater than 300 m².
For all housing, and buildings other than housing with an occupied space less than 300 m², refer to the Acceptable Solution H1/AS1 or Verification Method H1/VM1 as a means to demonstrate compliance or use an alternative means demonstrate compliance.
Scope
The Verification Method H1/VM2 does not include:
- the use of foil insulation,
- requirements to comply with Building Code clauses H.1.3.1(b), H1.3.4, H1.3.5 or H1.3.6. For these clauses, use an alternative means to demonstrate compliance.
This resource is not cited by any other resources.
Verification Method H1/VM2: Energy efficiency for buildings greater than 300 m².
This document is not CITED BY any other resources:
This resource cites:
Verification Method H1/VM2: Energy efficiency for buildings greater than 300 m².
This document CITES:
H1/VM2 (First edition, Amd 1) cites AS/NZS 4859.1:2018 Thermal insulation materials for buildings, Part 1: General criteria and technical provisions from 29/11/2021
H1/VM2 (First edition, Amd 1) cites NZS 4214:2006 Methods of determining the total thermal resistance of parts of buildings - SPONSORED from 31/10/2007
H1/VM2 (First edition, Amd 1) cites ISO 13370:2017 Thermal performance of buildings - Heat transfer via the ground - Calculation methods from 29/11/2021
H1/VM2 (First edition, Amd 1) cites ANSI/ASHRAE 140-2017 Standard Method Of Test For The Evaluation Of Building Energy Analysis Computer Programs from 29/11/2021
H1/VM2 (First edition, Amd 1) cites BRANZ House Insulation Guide, 5th Edition 2014 from 29/11/2021
H1/VM2 (First edition, Amd 1) cites BS EN 673:2011 Glass in building. Determination of thermal transmittance (U value). Calculation method from 29/11/2021
H1/VM2 (First edition, Amd 1) cites ISO 10077-1:2017 Thermal performance of windows, doors and shutters — Calculation of thermal transmittance — Part 1: General from 29/11/2021
H1/VM2 (First edition, Amd 1) cites ISO 10077-2:2017 Thermal performance of windows, doors and shutters — Calculation of thermal transmittance — Part 2: Numerical method for frames from 29/11/2021
H1/VM2 (First edition, Amd 1) cites ISO 10211:2017 Thermal bridges in building construction — Heat flows and surface temperatures — Detailed calculations from 29/11/2021
H1/VM2 (First edition, Amd 1) cites ISO 10456:2007 Building materials and products — Hygrothermal properties — Tabulated design values and procedures for determining declared and design thermal values from 29/11/2021
H1/VM2 (First edition, Amd 1) cites ISO 12631:2017 Thermal performance of curtain walling — Calculation of thermal transmittance from 29/11/2021
H1/VM2 (First edition, Amd 1) cites ISO 13789:2017 Thermal performance of buildings — Transmission and ventilation heat transfer coefficients — Calculation method from 29/11/2021
H1/VM2 (First edition, Amd 1) cites International Energy Agency Building Energy Simulation Test (BESTEST) and Diagnostic Method from 29/11/2021