BS EN 14399-3:2015 High-strength structural bolting assemblies for preloading. System HR. Hexagon bolt and nut assemblies
- Abbreviation
- BS EN 14399-3:2015
- Valid from
- 1/01/2015
- Information provider
- Standards New Zealand,
- Author
- British Standards Institution, European Standardization Organisations
- Information type
- European Standard,
- Format
- PDF, HARD COPY,
Description
This European Standard, together with EN 14399-1, specifies the requirements for assemblies of high-strength structural bolts and nuts of system HR suitable for preloaded joints with large widths across flats, thread sizes M12 to M36 and property classes 8.8/8 and 10.9/10.
Bolt and nut assemblies conforming to this standard have been designed to allow preloading in accordance with ENV 1993-1-1 (Eurocode 3) and to obtain ductility predominantly by plastic elongation of the bolt. For this purpose the components have the following characteristics:
- nut height according to style 1;
- thread length of the bolt according to ISO 888.
This resource is cited by:
BS EN 14399-3:2015 High-strength structural bolting assemblies for preloading. System HR. Hexagon bolt and nut assemblies
This document is CITED BY:
-
B1/VM1 (Amd 16) (First edition, Amendment 16 )
BS EN 14399-3:2015 is cited by Verification Method B1/VM1: Structure - General from 3/04/2018
-
B1/VM1 (Amd 17) (First Edition, Amendment 17)
BS EN 14399-3:2015 is cited by Verification Method B1/VM1: Structure - General from 3/04/2018
-
B1/VM1 (Amd 18) (First Edition, Amendment 18)
BS EN 14399-3:2015 is cited by Verification Method B1/VM1: Structure - General from 3/04/2018
-
B1/VM1 (Amd 19) (First edition, Amendment 19)
BS EN 14399-3:2015 is cited by Verification Method B1/VM1: Structure - General from 3/04/2018
-
B1/VM1 (Amd 20) (First edition, Amendment 20)
BS EN 14399-3:2015 is cited by Verification Method B1/VM1: Structure - General from 3/04/2018
-
B1/VM1 (Amd 21) (First Edition, Amendment 21)
BS EN 14399-3:2015 is cited by Verification Method B1/VM1: Structure - General from 3/04/2018
-
BS EN 14399-1:2015
BS EN 14399-3:2015 is cited by BS EN 14399-1:2015 High-strength structural bolting assemblies for preloading. General requirements
-
BS EN 14399-2:2015
BS EN 14399-3:2015 is cited by BS EN 14399-2:2015 High-strength structural bolting assemblies for preloading. Suitability for preloading
This resource cites:
BS EN 14399-3:2015 High-strength structural bolting assemblies for preloading. System HR. Hexagon bolt and nut assemblies
This document CITES:
BS EN 14399-3:2015 cites BS EN 14399-1:2015 High-strength structural bolting assemblies for preloading. General requirements
BS EN 14399-3:2015 cites BS EN 14399-2:2015 High-strength structural bolting assemblies for preloading. Suitability for preloading
BS EN 14399-3:2015 cites BS EN 14399-5:2015 High-strength structural bolting assemblies for preloading. Plain washers
BS EN 14399-3:2015 cites BS EN 14399-6:2015 High-strength structural bolting assemblies for preloading. Plain chamfered washers
BS EN 14399-3:2015 cites BS EN 26157-1:1992 Fasteners. Surface discontinuities. Bolts, screws and studs for general requirements
BS EN 14399-3:2015 cites BS EN ISO 10684:2004 Fasteners. Hot dip galvanized coatings
BS EN 14399-3:2015 cites BS EN ISO 3269:2001 Fasteners. Acceptance inspection
BS EN 14399-3:2015 cites BS EN ISO 6157-2:2004 Fasteners. Surface discontinuities. Nuts
BS EN 14399-3:2015 cites BS EN ISO 898-1:2013 Mechanical Properties Of Fasteners Made Of Carbon Steel And Alloy Steel - Part 1: Bolts, Screws And Studs With Specified Property Classes - Coarse Thread And Fine Pitch Thread (Iso 898-1:2013)
BS EN 14399-3:2015 cites BS EN ISO 898-2:2012 Mechanical Properties Of Fasteners Made Of Carbon Steel And Alloy Steel - Part 2: Nuts with specified property classes. Coarse thread and fine pitch thread
BS EN 14399-3:2015 cites ISO 261:1998 ISO general purpose metric screw threads - General plan
BS EN 14399-3:2015 cites ISO 3508:1976 Thread run-outs for fasteners with thread in accordance with ISO 261 and ISO 262
BS EN 14399-3:2015 cites ISO 4759-1:2000 Tolerances for fasteners - Part 1: Bolts, screws, studs and nuts - Product grades A, B and C
BS EN 14399-3:2015 cites ISO 965-2:1998 ISO general purpose metric screw threads -- Tolerances -- Part 2: Limits of sizes for general purpose external and internal screw threads -- Medium quality
BS EN 14399-3:2015 cites ISO 965-5:1998 ISO general purpose metric screw threads -- Tolerances -- Part 5: Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing