Verification Method B1/VM1: Structure - General
- Abbreviation
- B1/VM1 (Amd 19)
- Amendment
- 19
- Version
- First edition, Amendment 19
- Valid to
- 2/11/2022
- Valid from
- 28/11/2019
This resource is no longer current. B1/VM1 (Amd 21) (First Edition, Amendment 21),
- Information provider
- Ministry of Business, Innovation and Employment,
- Information type
- Verification Method,
- Format
- PDF,
Description
The Standards cited in this Verification Method provide a means for the design of structures to meet the performance requirements of New Zealand Building Code Clause B1 Structure.
For any particular building or building design, the Verification Method shall consist of AS/NZS 1170 used in conjunction with the relevant cited material standards as modified by this Verification Method.
Scope
The citation covers only the scope stated or implicit in each Standard. Aspects outside the scope, when applied to a particular building, are not part of the Verification Method.
This resource is not cited by any other resources.
Verification Method B1/VM1: Structure - General
This document is not CITED BY any other resources:
This resource cites:
Verification Method B1/VM1: Structure - General
This document CITES:
B1/VM1 (Amd 19) cites AS/NZS 1163:2016 Cold-formed structural steel hollow sections from 3/04/2018
B1/VM1 (Amd 19) cites AS/NZS 1170.0:2002 Structural Design Actions - General principles from 1/12/2008
B1/VM1 (Amd 19) cites AS/NZS 1170.1:2002 (R2016) Structural Design Actions - Permanent, imposed and other actions from 1/12/2008
B1/VM1 (Amd 19) cites AS/NZS 1170.2:2011 (R2016) Structural Design Actions - Wind Actions from 14/02/2014
B1/VM1 (Amd 19) cites AS/NZS 1170.3:2003 (R2016) Structural Design Actions - Snow and ice actions from 1/12/2008
B1/VM1 (Amd 19) cites AS/NZS 1554.1:2014 Structural steel welding - Part 1: Welding of steel structures from 3/04/2018
B1/VM1 (Amd 19) cites AS/NZS 1594:2002 (R2016) Hot-rolled steel flat products from 3/04/2018
B1/VM1 (Amd 19) cites AS/NZS 1664.1:1997 Aluminium structures - Limit state design from 1/12/2000
B1/VM1 (Amd 19) cites AS/NZS 1748.1:2011 Timber - Solid - Stress-graded for structural purposes - General requirements from 14/02/2014
B1/VM1 (Amd 19) cites AS/NZS 1748.2:2011 Timber - Stress graded - Product requirements for mechanically stress-graded timber - Qualification of grading method from 14/02/2014
B1/VM1 (Amd 19) cites AS/NZS 2327:2017 Composite structures - Composite steel-concrete construction in buildings from 30/11/2018
B1/VM1 (Amd 19) cites AS/NZS 3678:2016 Structural steel - Hot-rolled plates, floorplates and slabs from 3/04/2018
B1/VM1 (Amd 19) cites AS/NZS 3679.1:2016 Structural steel - Part 1: Hot-rolled bars and sections from 3/04/2018
B1/VM1 (Amd 19) cites AS/NZS 3679.2:2016 Structural steel - Part 2: Welded I-sections from 3/04/2018
B1/VM1 (Amd 19) cites AS/NZS 3725:2007 Design for installation of buried concrete pipes from 30/09/2010
B1/VM1 (Amd 19) cites AS/NZS 4058:2007 Pre cast concrete pipes (pressure and non-pressure) from 30/09/2010
B1/VM1 (Amd 19) cites AS/NZS 4600:2005 Cold-formed steel structures from 30/09/2010
B1/VM1 (Amd 19) cites AS/NZS 4671:2001 Steel reinforcing materials from 4/11/2016 until 29/11/2021
B1/VM1 (Amd 19) cites AS/NZS 5131:2016 Structural steelwork - Fabrication and erection from 3/04/2018
B1/VM1 (Amd 19) cites NZS 1170.5:2004 (Excl. A1) Structural Design Actions - Part 5: Earthquake design actions - New Zealand - Sponsored. from 19/05/2011
B1/VM1 (Amd 19) cites NZS 3101.1:2006 (inc A1, A2, A3) Concrete structures standard. - Part 1: The design of concrete structures. - SPONSORED. from 31/03/2018
B1/VM1 (Amd 19) cites NZS 3106:2009 Design of concrete structures for the storage of liquids. - SPONSORED from 30/09/2010
B1/VM1 (Amd 19) cites NZS 3404 Parts 1 and 2:1997 Steel structures standard - SPONSORED from 1/12/2000
B1/VM1 (Amd 19) cites NZS 3603:1993 Timber structures standard from 1/09/1993
B1/VM1 (Amd 19) cites NZS 3622:2004 Verification of timber properties - SPONSORED from 1/04/2007
B1/VM1 (Amd 19) cites NZS 4211:2008 Specification for performance of windows - SPONSORED from 1/08/2011
B1/VM1 (Amd 19) cites NZS 4219:2009 Seismic performance of engineering systems in buildings - SPONSORED from 1/08/2011
B1/VM1 (Amd 19) cites NZS 4230:2004 Design of reinforced concrete masonry structures - SPONSORED from 1/12/2008
B1/VM1 (Amd 19) cites NZS 4297:1998 Engineering design of earth buildings - SPONSORED from 1/12/2000
B1/VM1 (Amd 19) cites NZS 4402.2.4:1986 Methods of testing soils for civic engineering purposes - Soil classification tests - Test 2.4 Determination of the plasticity index - SPONSORED from 1/07/1992
B1/VM1 (Amd 19) cites NZS 4402.2.8.1:1986 Methods of testing soils for civil engineering purposes - Soil classification tests - Test 2.8.1 Standard method by wet sieving - SPONSORED from 1/07/1992
B1/VM1 (Amd 19) cites NZS 4402.2.8.2:1986 Methods of testing soils for civic engineering purposes - Soil classification tests - Test 2.8.2 Standard method by dry sieving - SPONSORED from 1/07/1992
B1/VM1 (Amd 19) cites NZS 4402.2.8.3:1986 Methods of testing soils for civic engineering purposes - Soil classification tests - Test 2.8.3 Standard method for fine soils (pipette method) - SPONSORED from 1/07/1992
B1/VM1 (Amd 19) cites NZS 4402.2.8.4:1986 Methods of testing soils for civil engineering purposes - Soil classification tests - Test 2.8.4 Standard method for fine soils (hydrometer method) - SPONSORED from 1/07/1992
B1/VM1 (Amd 19) cites NZS 4402.4.1.1:1986 Methods of testing soils for civil engineering purposes - Part 4: Soil compaction tests - Determination of the dry density/water content relationship - Test 4.1.1 New Zealand standard compaction test - SPONSORED from 1/07/1992
B1/VM1 (Amd 19) cites NZS 4402.4.2.1:1988 Methods of testing soils for civil engineering purposes - Soil compaction tests -Determination of the minimum and maximum dry densities and relative density of a cohesionless soil - Test 4.2.1 Minimum dry density - SPONSORED from 1/07/1992
B1/VM1 (Amd 19) cites NZS 4402.4.2.2:1988 Methods of testing soils for civil engineering purposes - Soil compaction tests -Determination of the minimum and maximum dry densities and relative density of a cohesionless soil - Test 4.2.2 Maximum dry density - SPONSORED from 1/07/1992
B1/VM1 (Amd 19) cites NZS 4402.4.2.3:1988 Methods of testing soils for civic engineering purposes - Soil compaction tests - Determination of the minimum and maximum dry densities and relative density of a cohesionless soil - Test 4.2.3 Relative density - SPONSORED from 1/07/1992
B1/VM1 (Amd 19) cites NZS 4402.5.1.1:1986 Methods of testing soils for civil engineering purposes - Soil density tests - Determination of the density of soil - Test 5.1.1 Sand replacement method for the determination of in situ density - SPONSORED from 1/07/1992
B1/VM1 (Amd 19) cites NZS 4431:1989 Code of practice for earth fill for residential development - SPONSORED from 1/07/1992
B1/VM1 (Amd 19) cites SNZ HB 8630:2004 Tracks and outdoor visitor structures - SPONSORED from 1/12/2008
B1/VM1 (Amd 19) cites SNZ TS 3404:2018 Durability requirements for steel structures and components - SPONSORED from 30/11/2018
B1/VM1 (Amd 19) cites AS 1391-2007 (R2017) Metallic materials - Tensile testing at ambient temperature from 4/11/2016
B1/VM1 (Amd 19) cites Chartered Professional Engineers of New Zealand Act 2002 from 1/12/2008
B1/VM1 (Amd 19) cites BS EN 14399-1:2015 High-strength structural bolting assemblies for preloading. General requirements from 3/04/2018
B1/VM1 (Amd 19) cites BS EN 14399-2:2015 High-strength structural bolting assemblies for preloading. Suitability for preloading from 3/04/2018
B1/VM1 (Amd 19) cites BS EN 14399-3:2015 High-strength structural bolting assemblies for preloading. System HR. Hexagon bolt and nut assemblies from 3/04/2018
B1/VM1 (Amd 19) cites BS EN 14399-5:2015 High-strength structural bolting assemblies for preloading. Plain washers from 3/04/2018
B1/VM1 (Amd 19) cites Guidelines for the Field Description of Soils and Rocks in Engineering Use (1988) from 1/07/1992 until 29/11/2021
B1/VM1 (Amd 19) cites ISO 15630-2:2010 Steel for the reinforcement and prestressing of concrete - Test methods - Part 2 Welded fabric from 4/11/2016
B1/VM1 (Amd 19) cites ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories from 4/11/2016