AS/NZS 1664.1:1997 Aluminium structures - Limit state design
- Abbreviation
- AS/NZS 1664.1:1997
- Amendment
- Amendment 1 - incorporated. Published 04/01/1999
- Valid from
- 4/09/1997
- Information provider
- Standards New Zealand,
- Author
- Standards New Zealand, Standards Australia
- Information type
- New Zealand Standard,
Description
This Standard specifies requirements for the design of aluminium building type structural load-carrying members and elements. The limit state design criteria are intended as an alternative to the allowable stress design criteria (see AS 1664.2).
One design specification applies throughout the design of a single structure.
This resource is cited by:
AS/NZS 1664.1:1997 Aluminium structures - Limit state design
This document is CITED BY:
-
B1/VM1 (Amd 15) (First edition, amendment 15)
AS/NZS 1664.1:1997 is cited by Verification Method B1/VM1: Structure - General from 1/12/2000
-
B1/VM1 (Amd 16) (First edition, Amendment 16 )
AS/NZS 1664.1:1997 is cited by Verification Method B1/VM1: Structure - General from 1/12/2000
-
B1/VM1 (Amd 14) (First edition, Amendment 14)
AS/NZS 1664.1:1997 is cited by Verification Method B1/VM1: Structure - General from 1/12/2000
-
B1/VM1 (Amd 12) (First Edition, Amendment 12.)
AS/NZS 1664.1:1997 is cited by Verification Method B1/VM1: Structure - General from 1/12/2000
-
B1/VM1 (Amd 11) (First Edition, Amendment 11)
AS/NZS 1664.1:1997 is cited by Verification Method B1/VM1: Structure - General from 1/12/2000
-
B1/VM1 (Amd 10) (First edition, Amendment 10)
AS/NZS 1664.1:1997 is cited by Verification Method B1/VM1: Structure - General from 1/12/2000
-
B1/VM1 (Amd 13) (First edition, Amendment 13)
AS/NZS 1664.1:1997 is cited by Verification Method B1/VM1: Structure - General from 1/12/2000
-
B1/VM1 (Amd 17) (First Edition, Amendment 17)
AS/NZS 1664.1:1997 is cited by Verification Method B1/VM1: Structure - General from 1/12/2000
-
B1/VM1 (Amd 18) (First Edition, Amendment 18)
AS/NZS 1664.1:1997 is cited by Verification Method B1/VM1: Structure - General from 1/12/2000
-
B1/VM1 (Amd 19) (First edition, Amendment 19)
AS/NZS 1664.1:1997 is cited by Verification Method B1/VM1: Structure - General from 1/12/2000
-
B1/VM1 (Amd 20) (First edition, Amendment 20)
AS/NZS 1664.1:1997 is cited by Verification Method B1/VM1: Structure - General from 1/12/2000
-
B1/VM1 (Amd 21) (First Edition, Amendment 21)
AS/NZS 1664.1:1997 is cited by Verification Method B1/VM1: Structure - General from 1/12/2000
-
AS 1657-2013
AS/NZS 1664.1:1997 is cited by AS 1657-2013 Fixed platforms, walkways, stairways and ladders - Design, construction and installation
This resource cites:
AS/NZS 1664.1:1997 Aluminium structures - Limit state design
This document CITES:
AS/NZS 1664.1:1997 cites AS/NZS 1664.1 Supp 1:1997 Aluminium structures - Limit state design - Commentary (Supplement to AS/NZS 1664.1:1997)
AS/NZS 1664.1:1997 cites AS/NZS 1664.2:1997 Aluminium structures - Allowable stress design
AS/NZS 1664.1:1997 cites NZS 4203:1992 General structural design and design loadings for buildings - SPONSORED
AS/NZS 1664.1:1997 cites AS 1170.3-1990 Minimum design loads on structures (known as the SAA Loading Code) Snow loads
AS/NZS 1664.1:1997 cites AS 1867-1986 Aluminium and aluminium alloys - Drawn tubes
AS/NZS 1664.1:1997 cites AS 1170.1-1989 Minimum design loads on structures (known as the SAA Loading Code) - Dead and live loads and load combinations
AS/NZS 1664.1:1997 cites AS 1170.2-1989 Minimum design loads on structures (known as the SAA Loading Code) - Wind loads
AS/NZS 1664.1:1997 cites AS 1170.4-1993 Minimum design loads on structures (known as the SAA Loading Code) - Earthquake loads
AS/NZS 1664.1:1997 cites AS 1391-1991 Metallic materials - Tensile testing at ambient temperature
AS/NZS 1664.1:1997 cites AS 1665-1992 Welding of aluminium structures
AS/NZS 1664.1:1997 cites AS 1734-1986 Aluminium and aluminium alloys - Flat sheet, coiled sheet and plate
AS/NZS 1664.1:1997 cites AS 1865-1986 Aluminium and aluminium alloys - Drawn wire, rod, bar and strip
AS/NZS 1664.1:1997 cites AS 1866-1986 Aluminium and aluminium alloys - Extruded rod, bar, solid and hollow shapes
AS/NZS 1664.1:1997 cites AS 2848.1-1986 Aluminium and aluminium alloys - Compositions and designations Wrought products
AS/NZS 1664.1:1997 cites ASTM D962-81 Standard specification for aluminium powder and paste pigments for paints