NZS 3101.1:2006 (inc A1, A2, A3) Concrete structures standard. - Part 1: The design of concrete structures. - SPONSORED.
- Abbreviation
- NZS 3101.1:2006 (inc A1, A2, A3)
- Amendment
- A1 - 2006, A2 - 2008, A3 - 2017
- Valid from
- 30/08/2017
- Information provider
- Standards New Zealand,
- Author
- Standards New Zealand
- Information type
- New Zealand Standard,
- Format
- PDF,
Description
Part One of this Standard - The Design of Concrete Structures, specifies minimum requirements for the design of reinforced and prestressed concrete structures.
Amendment 3 (2017) to NZS 3101.1&2:2006 involves significant revision and the introduction of new material. It has been primarily developed to address recommendations from the Canterbury Earthquakes Royal Commission. In addition, errors in the original published standard and commentary have been corrected and included in this amendment.
NZS 3101 Part 1 is used by structural engineers to design concrete structures. When read along with Verification Method B1/VM1, it provides a means of complying with the performance requirements of New Zealand Building Code clause B1 Structure.
It can also be used along with Acceptable Solution B2/AS1 to demonstrate the compliance of concrete building elements with clause B2 Durability.
Scope
NZS 3101 Part 1 is used by structural engineers to design concrete structures. When read along with Verification Method B1/VM1, it provides a means of complying with the performance requirements of New Zealand Building Code clause B1 Structure.
This resource is cited by:
NZS 3101.1:2006 (inc A1, A2, A3) Concrete structures standard. - Part 1: The design of concrete structures. - SPONSORED.
This document is CITED BY:
-
B1/VM1 (Amd 16) (First edition, Amendment 16 )
NZS 3101.1:2006 (inc A1, A2, A3) is cited by Verification Method B1/VM1: Structure - General from 31/03/2018
-
B1/VM1 (Amd 17) (First Edition, Amendment 17)
NZS 3101.1:2006 (inc A1, A2, A3) is cited by Verification Method B1/VM1: Structure - General from 31/03/2018
-
B1/VM1 (Amd 18) (First Edition, Amendment 18)
NZS 3101.1:2006 (inc A1, A2, A3) is cited by Verification Method B1/VM1: Structure - General from 31/03/2018
-
B1/VM1 (Amd 19) (First edition, Amendment 19)
NZS 3101.1:2006 (inc A1, A2, A3) is cited by Verification Method B1/VM1: Structure - General from 31/03/2018
-
B1/VM1 (Amd 20) (First edition, Amendment 20)
NZS 3101.1:2006 (inc A1, A2, A3) is cited by Verification Method B1/VM1: Structure - General from 31/03/2018
-
B1/VM1 (Amd 21) (First Edition, Amendment 21)
NZS 3101.1:2006 (inc A1, A2, A3) is cited by Verification Method B1/VM1: Structure - General from 31/03/2018
-
AS/NZS 2327:2017
NZS 3101.1:2006 (inc A1, A2, A3) is cited by AS/NZS 2327:2017 Composite structures - Composite steel-concrete construction in buildings
-
CCANZ CP 01:2022
NZS 3101.1:2006 (inc A1, A2, A3) is cited by Code of Practice for Weathertight Concrete and Concrete Masonry Construction
This resource cites:
NZS 3101.1:2006 (inc A1, A2, A3) Concrete structures standard. - Part 1: The design of concrete structures. - SPONSORED.
This document CITES:
NZS 3101.1:2006 (inc A1, A2, A3) cites AS/NZS 1170.0:2002 Structural Design Actions - General principles
NZS 3101.1:2006 (inc A1, A2, A3) cites AS/NZS 1170.1:2002 (R2016) Structural Design Actions - Permanent, imposed and other actions
NZS 3101.1:2006 (inc A1, A2, A3) cites AS/NZS 1170.2:2011 (R2016) Structural Design Actions - Wind Actions from 30/08/2017
NZS 3101.1:2006 (inc A1, A2, A3) cites AS/NZS 1170.3:2003 (R2016) Structural Design Actions - Snow and ice actions
NZS 3101.1:2006 (inc A1, A2, A3) cites AS/NZS 1214:2016 Hot-dip galvanized coatings on threaded fasteners (ISO metric coarse thread series) from 30/08/2017
NZS 3101.1:2006 (inc A1, A2, A3) cites AS/NZS 1554.3:2014 Structural steel welding - Part 3: Welding of reinforcing steel from 30/08/2017
NZS 3101.1:2006 (inc A1, A2, A3) cites AS/NZS 2699.3:2002 Built-in components for masonry construction - Lintels and shelf angles (durability requirements)
NZS 3101.1:2006 (inc A1, A2, A3) cites AS/NZS 3582.1:2016 Supplementary cementitious materials - Part 1: Fly ash from 30/08/2017
NZS 3101.1:2006 (inc A1, A2, A3) cites AS/NZS 3582.3:2016 Supplementary cementitious materials - Part 3: Amorphous silica from 30/08/2017
NZS 3101.1:2006 (inc A1, A2, A3) cites AS/NZS 4671:2001 Steel reinforcing materials
NZS 3101.1:2006 (inc A1, A2, A3) cites AS/NZS 4672.1:2007 Steel prestressing materials - Part 1: General requirements from 21/08/2008
NZS 3101.1:2006 (inc A1, A2, A3) cites AS/NZS 4680:2006 (R2017) Hot-dip galvanised (zinc) coatings on fabricated ferrous articles from 30/08/2017
NZS 3101.1:2006 (inc A1, A2, A3) cites NZS 1170.5:2004 (Excl. A1) Structural Design Actions - Part 5: Earthquake design actions - New Zealand - Sponsored. from 30/08/2017
NZS 3101.1:2006 (inc A1, A2, A3) cites NZS 3106:2009 Design of concrete structures for the storage of liquids. - SPONSORED from 30/08/2017
NZS 3101.1:2006 (inc A1, A2, A3) cites NZS 3109:1997 Concrete construction - SPONSORED from 30/08/2017
NZS 3101.1:2006 (inc A1, A2, A3) cites NZS 3112.1:1986 Methods of test for concrete - Tests relating to fresh concrete
NZS 3101.1:2006 (inc A1, A2, A3) cites NZS 3112.2:1986 Methods of test for concrete - Tests relating to the determination of strength of concrete - SPONSORED
NZS 3101.1:2006 (inc A1, A2, A3) cites NZS 3122:2009 Specification for Portland and blended cements (General and special purpose) from 30/08/2017
NZS 3101.1:2006 (inc A1, A2, A3) cites NZS 3152:1974 Specification for the manufacture and use of structural and insulating lightweight concrete - Metric Units
NZS 3101.1:2006 (inc A1, A2, A3) cites NZS 3404 Parts 1 and 2:1997 Steel structures standard - SPONSORED
NZS 3101.1:2006 (inc A1, A2, A3) cites NZS 3404.1:2009 Steel structures Standard - Part 1: Materials, fabrication, and construction - SPONSORED from 30/08/2017
NZS 3101.1:2006 (inc A1, A2, A3) cites AS 1012.10-2000 (R2014) Methods of testing concrete - Determination of indirect tensile strength of concrete cylinders ('Brasil' or splitting test)
NZS 3101.1:2006 (inc A1, A2, A3) cites AS 1012.11-2000 (R2014) Methods of testing concrete - Determination of the modulus of rupture
NZS 3101.1:2006 (inc A1, A2, A3) cites AS 1012.13:2015 Methods of testing concrete - Determination of the drying shrinkage of concrete for samples prepared in the field or in the laboratory from 30/08/2017
NZS 3101.1:2006 (inc A1, A2, A3) cites AS 1012.16-1996 (R2014) Method of testing concrete - Determination of creep of concrete cylinders in compression
NZS 3101.1:2006 (inc A1, A2, A3) cites AS 1012.20.1:2016 Methods of testing concrete - Determination of chloride and sulfate in hardened concrete and concrete aggregates - Nitric acid extraction method. from 30/08/2017
NZS 3101.1:2006 (inc A1, A2, A3) cites AS 1313-1989 Steel tendons for prestressed concrete - Cold-worked high-tensile alloy steel bars for prestressed concrete
NZS 3101.1:2006 (inc A1, A2, A3) cites AS 1530.4:2014 Methods for fire tests on building materials, components and structures. Part 4: Fire-resistance tests for elements of construction from 30/08/2017
NZS 3101.1:2006 (inc A1, A2, A3) cites AS 3582.2:2016 Supplementary cementitious materials for use with portland and blended cement - Part 2: Slag - Ground granulated iron blast-furnace from 30/08/2017
NZS 3101.1:2006 (inc A1, A2, A3) cites AS 3600-2009 Concrete structures
NZS 3101.1:2006 (inc A1, A2, A3) cites AS 4072.1-2005 (R2016) Components for the protection of openings in fire-resistant separating elements. Part 1: Service penetrations and control joints from 30/08/2017
NZS 3101.1:2006 (inc A1, A2, A3) cites ACI 210R-93: Erosion of Concrete in Hydraulic Structures (Reapproved 2008)
NZS 3101.1:2006 (inc A1, A2, A3) cites ACI 318-14 Building Code Requirements for Structural Concrete and Commentary from 30/08/2014
NZS 3101.1:2006 (inc A1, A2, A3) cites ASTM C1152-04e1 Standard test method for acid-soluble chloride in mortar and concrete
NZS 3101.1:2006 (inc A1, A2, A3) cites Bridge Manual (SP/M/022) Second Edition - 2003 from 30/08/2017
NZS 3101.1:2006 (inc A1, A2, A3) cites BS 1377-3:1990 Methods of test for soils for civil engineering purposes. Part 3: Chemical and electro-chemical tests.
NZS 3101.1:2006 (inc A1, A2, A3) cites BS 1881-124:2015 Testing concrete. Methods for analysis of hardened concrete from 30/08/2017
NZS 3101.1:2006 (inc A1, A2, A3) cites BS 8204-2:2003 +A2:2011 Screeds bases and in-situ floorings. Concrete wearing surfaces
NZS 3101.1:2006 (inc A1, A2, A3) cites BS 8500-1:2015+A1:2016 Concrete. Complementary British Standard to BS EN 206, Method of specifying and guidance for the specifier from 30/08/2017
NZS 3101.1:2006 (inc A1, A2, A3) cites BS EN 1992-1-2:2004 Eurocode 2: Design of concrete structures. General rules. Structural fire design. from 30/08/2017
NZS 3101.1:2006 (inc A1, A2, A3) cites DIN 4030-2:2008 Assessment of water, soil and gases for their aggressiveness to concrete - Part 2: Sampling and analysis of water and soil samples. from 30/08/2017
NZS 3101.1:2006 (inc A1, A2, A3) cites DIN 4102-2:1977-09 Fire Behaviour of Building Materials and Building Components; Building Components; Definitions, Requirements and Tests from 21/08/2008
NZS 3101.1:2006 (inc A1, A2, A3) cites EOTA TR 45 (2013) Design of Metal Anchors For Use In Concrete Under Seismic Actions from 30/08/2017
NZS 3101.1:2006 (inc A1, A2, A3) cites ETAG 001 Annex E (2013) - Assessment of Metal Anchors for Use in Concrete under Seismic Actions. from 30/08/2017
NZS 3101.1:2006 (inc A1, A2, A3) cites ISO 15835-1:2009 Steel for the reinforcement of concrete - Reinforcement couplers for mechanical splices of bars Part 1: Requirements from 30/08/2017
NZS 3101.1:2006 (inc A1, A2, A3) cites ISO 15835-2:2009 Steels for the reinforcement of concrete -- Reinforcement couplers for mechanical splices of bars -- Part 2: Test methods from 30/08/2017
NZS 3101.1:2006 (inc A1, A2, A3) cites ISO 834-1:1999 Fire resistance tests-Elements of building construction-General requirements from 21/08/2008
NZS 3101.1:2006 (inc A1, A2, A3) cites Safe work with precast concrete