AS/NZS 4680:2006 (R2017) Hot-dip galvanised (zinc) coatings on fabricated ferrous articles

Abbreviation: AS/NZS 4680:2006
Valid from: 29/08/2006
Replaces: AS/NZS 4680:1999,

Information provider: Standards New Zealand,
Author: Standards New Zealand, Standards Australia
Information type: New Zealand Standard,
Format: PDF, HARD COPY,

Cited By: This resource is cited by 34 documents (show Citations)
Cites: This resource cites 10 documents (show Citations)

Description

This Standard specifies requirements and tests for hot-dip zinc coatings on fabrications, assembled steel products, tubular fabrications, fabricated wire work, steel forgings, steel stampings, ferrous castings, nails and small components.

Cited in Ministry's Simple House Acceptable Solution.

Scope

This Standard applies to both centrifuged and non-centrifuged articles.

This Standard does not apply to products such as wire and welded wire fabric (see AS/NZS 4534), sheet (see AS 1397) or open sections (see AS/NZS 4791) and tube hot-dip galvanized in continuous, semi-continuous or specialized plants (see AS/NZS 4792).

For assistance with locating previous versions, please contact the information provider.

View on Information Provider website

For assistance with locating previous versions, please contact the information provider.

This resource is cited by:

AS/NZS 4680:2006 (R2017) Hot-dip galvanised (zinc) coatings on fabricated ferrous articles

This document is CITED BY:

B1/AS3 (Amd 15) (First edition, amendment 15)

AS/NZS 4680:2006 is cited by Acceptable Solution B1/AS3: Small Chimneys from 30/09/2010
B1/AS3 (Amd 21) (First Edition, Amendment 21)

AS/NZS 4680:2006 is cited by Acceptable Solution B1/AS3: Small Chimneys from 30/09/2010
B1/AS3 (Amd 20) (First edition, Amendment 20)

AS/NZS 4680:2006 is cited by Acceptable Solution B1/AS3: Small Chimneys from 30/09/2010
B1/AS3 (Amd 19) (First edition, Amendment 19)

AS/NZS 4680:2006 is cited by Acceptable Solution B1/AS3: Small Chimneys from 30/09/2010
B1/AS3 (Amd 18) (First Edition, Amendment 18)

AS/NZS 4680:2006 is cited by Acceptable Solution B1/AS3: Small Chimneys from 30/09/2010
B1/AS3 (Amd 17) (First Edition, Amendment 17)

AS/NZS 4680:2006 is cited by Acceptable Solution B1/AS3: Small Chimneys from 30/09/2010
B1/AS3 (Amd 16) (First edition, Amendment 16)

AS/NZS 4680:2006 is cited by Acceptable Solution B1/AS3: Small Chimneys from 30/09/2010
B1/AS3 (Amd 14) (First edition, Amendment 14)

AS/NZS 4680:2006 is cited by Acceptable Solution B1/AS3: Small Chimneys from 30/09/2010
B1/AS3 (Amd 13) (First edition, Amendment 13)

AS/NZS 4680:2006 is cited by Acceptable Solution B1/AS3: Small Chimneys from 30/09/2010
B1/AS3 (Amd 12) (First edition, Amendment 12)

AS/NZS 4680:2006 is cited by Acceptable Solution B1/AS3: Small Chimneys from 30/09/2010
B1/AS3 (Amd 11) (First Edition, Amendment 11)

AS/NZS 4680:2006 is cited by Acceptable Solution B1/AS3: Small Chimneys from 30/09/2010
B1/AS3 (Amd 10) (First edition, Amendment 10)

AS/NZS 4680:2006 is cited by Acceptable Solution B1/AS3: Small Chimneys from 30/09/2010
E2/AS1 (Amd 6) (Third Edition, Amendment 6)

AS/NZS 4680:2006 is cited by Acceptable Solution E2/AS1: External Moisture from 1/08/2011
E2/AS1 (Amd 10) (Third Edition, Amendment 10)

AS/NZS 4680:2006 is cited by Acceptable Solution E2/AS1: External Moisture from 1/08/2011
E2/AS1 (Amd 7) (Third Edition, Amendment 7)

AS/NZS 4680:2006 is cited by Acceptable Solution E2/AS1: External Moisture from 1/08/2011
E2/AS1 (Amd 9) (Third Edition, Amendment 9)

AS/NZS 4680:2006 is cited by Acceptable Solution E2/AS1: External Moisture from 1/08/2011
E2/AS1 (Amd 8) (Third Edition, Amendment 8)

AS/NZS 4680:2006 is cited by Acceptable Solution E2/AS1: External Moisture from 1/08/2011
E2/AS1 (Amd 5) (Third Edition, Amendment 5)

AS/NZS 4680:2006 is cited by Acceptable Solution E2/AS1: External Moisture from 1/08/2011
E2/AS1 (Amd 5, Errata 2) (Third Edition, Amendment 5, Errata 2)

AS/NZS 4680:2006 is cited by Acceptable Solution E2/AS1: External Moisture from 1/08/2011
AS 1397:2021

AS/NZS 4680:2006 is cited by AS 1397:2021 Continuous hot-dip metallic coated steel sheet and strip - Coatings of zinc and zinc alloyed with aluminium and magnesium
AS 1657-2013

AS/NZS 4680:2006 is cited by AS 1657-2013 Fixed platforms, walkways, stairways and ladders - Design, construction and installation
AS/NZS 3500.1:2015

AS/NZS 4680:2006 is cited by AS/NZS 3500.1:2015 Plumbing and drainage - Part 1: Water services
AS/NZS 3500.1:2018

AS/NZS 4680:2006 is cited by AS/NZS 3500.1:2018 Plumbing and drainage Part 1: Water services
AS/NZS 3500.2:2015

AS/NZS 4680:2006 is cited by AS/NZS 3500.2:2015 Plumbing and drainage - Part 2: Sanitary plumbing and drainage
AS/NZS 3500.2:2018

AS/NZS 4680:2006 is cited by AS/NZS 3500.2:2018 Plumbing and drainage Part 2: Sanitary plumbing and drainage
AS/NZS 3500.3:2018

AS/NZS 4680:2006 is cited by AS/NZS 3500.3:2018 Plumbing and drainage Part 3: Stormwater drainage
AS/NZS 3500.3:2021

AS/NZS 4680:2006 is cited by AS/NZS 3500.3:2021 Plumbing and drainage, Part 3: Stormwater drainage
AS/NZS 5131:2016

AS/NZS 4680:2006 is cited by AS/NZS 5131:2016 Structural steelwork - Fabrication and erection
B1/AS2 (Amd 10) (First edition, Amendment 10)

AS/NZS 4680:2006 is cited by B1/AS2: Timber Barriers - withdrawn Acceptable Solution from 30/09/2010
NASH Building Envelope Solutions: 2019

AS/NZS 4680:2006 is cited by NASH Building Envelope Solutions: 2019 - Light Steel Framed Buildings.
NZS 3101.1:2006 (inc A1, A2, A3)

AS/NZS 4680:2006 is cited by NZS 3101.1:2006 (inc A1, A2, A3) Concrete structures standard. - Part 1: The design of concrete structures. - SPONSORED. from 30/08/2017
NZS 3604:2011

AS/NZS 4680:2006 is cited by NZS 3604:2011 Timber-framed buildings - SPONSORED
SH/AS1 (First edition, unamended)

AS/NZS 4680:2006 is cited by Simple House - Acceptable Solution Revoked
SNZ TS 3404:2018

AS/NZS 4680:2006 is cited by SNZ TS 3404:2018 Durability requirements for steel structures and components - SPONSORED

AS/NZS 4680:2006 (R2017) Hot-dip galvanised (zinc) coatings on fabricated ferrous articles

Description

Cited in Ministry's Simple House Acceptable Solution.

View on Information Provider website

AS/NZS 4680:2006 (R2017) Hot-dip galvanised (zinc) coatings on fabricated ferrous articles

Description

Cited in Ministry's Simple House Acceptable Solution.

View on Information Provider website

This resource cites:

AS/NZS 4680:2006 (R2017) Hot-dip galvanised (zinc) coatings on fabricated ferrous articles

This document CITES:

AS/NZS 2312:2002

AS/NZS 4680:2006 cites AS/NZS 2312:2002 Guide to the protection of structural steel against atmospheric corrosion by the use of protective coatings

AS/NZS 3750.15:1998

AS/NZS 4680:2006 cites AS/NZS 3750.15:1998 (R2013) Paints for steel structures - Part 15: Inorganic zinc silicate paint

AS/NZS 3750.9:1994

AS/NZS 4680:2006 cites AS/NZS 3750.9:1994 Paints for steel structures - Part 9: Organic zinc-rich primer

AS 1397-2001

AS/NZS 4680:2006 cites AS 1397-2001 Steel sheet and strip - Hot-dipped zinc-coated or aluminium/zinc-coated

AS 2331.1.3-2001

AS/NZS 4680:2006 cites AS 2331.1.3-2001 Methods of test for metallic and related coatings - Method 1.3: Local thickness tests - Magnetic method

AS 2331.1.4-2001

AS/NZS 4680:2006 cites AS 2331.1.4-2001 (R2017) Methods of test for metallic and related coatings - Method 1.4: Local thickness tests - Magnetic induction and eddy current methods

AS 2331.2.1-2001

AS/NZS 4680:2006 cites AS 2331.2.1-2001 (R2017) Methods of test for metallic and related coatings - Method 2.1: Local thickness tests - Tests for average coating mass per unit area or for thickness - Dissolution methods - Strip and weigh and analytical

AS 2331.2.3-2001

AS/NZS 4680:2006 cites AS 2331.2.3-2001 (R2017) Methods of test for metallic and related coatings - Method 2.3: Local thickness tests - Tests for average coating mass per unit area or for thickness - Hydrogen evolution method for zinc coatings

AS 3894.3-2002 (R2013)

AS/NZS 4680:2006 cites AS 3894.3-2002 (R2013) Site testing of protective coatings - Method 3: Determination of dry film thickness

ISO 2063:2005

AS/NZS 4680:2006 cites ISO 2063:2005 Thermal spraying - Metallic and other inorganic coatings - Zinc aluminium and their alloys

Feedback