Acceptable Solution B1/AS3: Small Chimneys
- Abbreviation
- B1/AS3 (Amd 15)
- Amendment
- 15
- Version
- First edition, amendment 15
- Valid to
- 30/06/2018
- Valid from
- 1/01/2017
This resource is no longer current. B1/AS3 (Amd 21) (First Edition, Amendment 21),
- Information provider
- Ministry of Business, Innovation and Employment,
- Information type
- Acceptable Solution,
- Format
- PDF,
Description
Acceptable Solution B1/AS3 provides a means of compliance with Building Code Clause B1 Structure.
Clause B1 requires buildings to withstand likely loads, including wind, earthquake, live and dead loads (people and building contents).
Clause B1 sets requirements around the combination of loads that buildings, building elements and sitework are likely to experience during construction, alteration and throughout their lives.
The performance requirements outline how buildings should be stable, not degrade and withstand physical conditions to protect lives and other property. It makes due allowance for the intended use of a building, the consequence of failure and other limitations.
This acceptable solution applies to small chimneys and to supporting hearth slabs for solid fuel burning domestic appliances.
Scope
The acceptable solutions described in this document are for chimneys built of brickwork, concrete or precast pumice concrete, that are connected to timber frame or masonry buildings complying with NZS 3604 or NZS 4229.
This resource is not cited by any other resources.
Acceptable Solution B1/AS3: Small Chimneys
This document is not CITED BY any other resources:
This resource cites:
Acceptable Solution B1/AS3: Small Chimneys
This document CITES:
B1/AS3 (Amd 15) cites AS/NZS 2918:2001 Domestic solid fuel burning appliances - Installation from 30/09/2010
B1/AS3 (Amd 15) cites AS/NZS 3869:1999 Domestic solid fuel burning appliances - Design and construction from 30/09/2010
B1/AS3 (Amd 15) cites AS/NZS 4671:2001 Steel reinforcing materials from 30/09/2010
B1/AS3 (Amd 15) cites AS/NZS 4680:2006 (R2017) Hot-dip galvanised (zinc) coatings on fabricated ferrous articles from 30/09/2010
B1/AS3 (Amd 15) cites NZS 3109:1997 Concrete construction - SPONSORED from 1/12/2000
B1/AS3 (Amd 15) cites NZS 3112.2:1986 Methods of test for concrete - Tests relating to the determination of strength of concrete - SPONSORED from 1/07/1992
B1/AS3 (Amd 15) cites NZS 3604:2011 Timber-framed buildings - SPONSORED from 19/05/2011
B1/AS3 (Amd 15) cites NZS 4210:2001 Code of practice for masonry construction: materials and workmanship - SPONSORED from 30/09/2010
B1/AS3 (Amd 15) cites NZS 4229:2013 Concrete masonry buildings not requiring specific engineering design - SPONSORED from 14/02/2014
B1/AS3 (Amd 15) cites AS 1397-2001 Steel sheet and strip - Hot-dipped zinc-coated or aluminium/zinc-coated from 30/09/2010