AS 1397:2021 Continuous hot-dip metallic coated steel sheet and strip - Coatings of zinc and zinc alloyed with aluminium and magnesium
- Abbreviation
- AS 1397:2021
- Valid from
- 26/02/2021
- Information provider
- Intertek Inform,
- Author
- Standards Australia
- Information type
- Australian Standard,
- Format
- PDF, HARD COPY,
Description
This Standard specifies requirements for continuously hot-dip metallic coated sheet steel and strip supplied in thicknesses up to and including 5.0 mm.
Scope
Requirements for product conformity to this Standard are given in Appendix B.
Requirements covered in this Standard are as follows:
- Formability grades of steel.
- Structural grades of steel.
- Classes of zinc coating, including differential coatings.
- Classes of zinc coating converted to zinc/iron alloy.
- Classes of zinc/aluminium coatings.
- Classes of zinc/aluminium/magnesium alloy coating.
- Classes of aluminium/zinc alloy coating.
- Classes of aluminium/zinc/magnesium alloy coating.
- Surface finish.
Advice and recommendations on information to be supplied by the purchaser at the time of enquiry or order are contained in Appendix A.
The specified requirements apply to the full length and full width of the product supplied, unless otherwise indicated. Within the description of the classes of coatings, the majority element present is listed first, followed by the next major element and followed by a third element if appropriate.
This resource is cited by:
AS 1397:2021 Continuous hot-dip metallic coated steel sheet and strip - Coatings of zinc and zinc alloyed with aluminium and magnesium
This document is CITED BY:
-
E1/AS1 (Amd 12) (First Edition, Amendment 12.)
AS 1397:2021 is cited by Acceptable Solution E1/AS1: Surface Water from 2/11/2023
This resource cites:
AS 1397:2021 Continuous hot-dip metallic coated steel sheet and strip - Coatings of zinc and zinc alloyed with aluminium and magnesium
This document CITES:
AS 1397:2021 cites AS/NZS 1050.16:1994 Methods for the analysis of iron and steel - Part 16: Determination of sulfur content - Infrared absorption method after combustion in an induction furnace
AS 1397:2021 cites AS/NZS 1050.18:1994 (R2016) Methods for the analysis of iron and steel - Part 18: Determination of phosphorus - Spectrophotometric method
AS 1397:2021 cites AS/NZS 1050.1:1996 (R2016) Methods for the analysis of iron and steel - Part 1: Sampling iron and steel for chemical analysis
AS 1397:2021 cites AS/NZS 1050.20:1994 (R2016) Methods for the analysis of iron and steel - Part 20: Determination of magnesium content - Flame atomic absorption spectrometric method
AS 1397:2021 cites AS/NZS 1050.21:1994 (R2016) Methods for the analysis of iron and steel - Part 21: Determination of cobalt content - Spectrophotometric method
AS 1397:2021 cites AS/NZS 1050.24:1994 (R2016) Methods for the analysis of iron and steel - Part 24: Determination of aluminium content - Spectrophotometric method
AS 1397:2021 cites AS/NZS 1050.26:1994 (R2016) Methods for the analysis of iron and steel - Part 26: Silicon in iron and steel - Spectrophotometric method
AS 1397:2021 cites AS/NZS 1050.27:1994 (R016) Methods for the analysis of iron and steel - Part 27: Determination of titanium content - Spectrophotometric method
AS 1397:2021 cites AS/NZS 1050.28:1994 (R2016) Methods for the analysis of iron and steel - Part 28: Vanadium in steel - Potentiometric method
AS 1397:2021 cites AS/NZS 1050.2:1994 (R2016) Methods for the analysis of iron and steel - Part 2: Determination of carbon content - Gravimetric method
AS 1397:2021 cites AS/NZS 1050.31:1994 (R206) Methods for the analysis of iron and steel - Part 31: Determination of niobium content - PAR spectrometric method
AS 1397:2021 cites AS/NZS 1050.32:1994 (R2016) Methods for the analysis of iron and steel - Part 32: Determination of carbon content - Infrared method
AS 1397:2021 cites AS/NZS 1050.37:1994 (R2016) Methods for the analysis of iron and steel - Part 37: Determination of copper content - Flame atomic absorption spectrometric method
AS 1397:2021 cites AS/NZS 1050.38:1994 (R2016) Methods for the analysis of iron and steel - Part 38: Determination of vanadium content - Flame atomic absorption spectrometric method
AS 1397:2021 cites AS/NZS 1050.39:1994 (R2016) Methods for the analysis of iron and steel - Part 39: Determination of chromium content - Flame atomic absorption spectrometric method
AS 1397:2021 cites AS/NZS 1050.6:1995 (R2016) Methods for the analysis of iron and steel - Part 6: Determination of tin content - Flame atomic absorption spectrometric method
AS 1397:2021 cites AS/NZS 1050.8:1994 (R2016) Methods for the analysis of iron and steel - Determination of manganese content (spectrophotometric method)
AS 1397:2021 cites AS/NZS 1365:1996 (R2016) Tolerances for flat-rolled steel products
AS 1397:2021 cites AS/NZS 4680:2006 (R2017) Hot-dip galvanised (zinc) coatings on fabricated ferrous articles
AS 1397:2021 cites AS 1199.0-2003 (2016) Sampling procedures for inspection by attributes - Part 0: Introduction to the ISO 2859 attribute sampling system
AS 1397:2021 cites AS 1199.1-2003 (R2016) Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
AS 1397:2021 cites AS 1199.2-2003 (R2016) Sampling procedures for inspection by attributes - Part 2: Sampling plans indexed by limiting quality (LQ) for isolated lot inspection
AS 1397:2021 cites AS 1199.3-2003 (R2016) Sampling procedures for inspection by attributes - Part 3: Skip-lot sampling procedures
AS 1397:2021 cites AS 1199.4-2003 (R2016) Sampling procedures for inspection by attributes - Part 4: Procedures for assessment of declared quality levels
AS 1397:2021 cites AS 1391:2020 Metallic materials - Tensile testing - Method of test at room temperature
AS 1397:2021 cites AS 2331.2.1-2001 (R2017) Methods of test for metallic and related coatings - Method 2.1: Local thickness tests - Tests for average coating mass per unit area or for thickness - Dissolution methods - Strip and weigh and analytical
AS 1397:2021 cites AS 2331.2.3-2001 (R2017) Methods of test for metallic and related coatings - Method 2.3: Local thickness tests - Tests for average coating mass per unit area or for thickness - Hydrogen evolution method for zinc coatings
AS 1397:2021 cites AS 2490-1997 Sampling procedures and charts for inspection by variables for percent nonconforming
AS 1397:2021 cites AS 2505.1-2004 (R2017) Metallic materials - Sheet, strip and plate - Bend tests
AS 1397:2021 cites AS 2706-2003 (R2018) Numerical values - Rounding and interpretation of limiting values
AS 1397:2021 cites ASTM A1046/A1046M-19 Standard Specification for Steel Sheet, Zinc-Aluminum-Magnesium Alloy-Coated by the Hot-Dip Process
AS 1397:2021 cites ASTM A754 / A754M-18 Standard Test Method for Coating Weight (Mass) of Metallic Coatings on Steel by X-Ray Fluorescence
AS 1397:2021 cites ISO 7870-3:2020 Control charts -- Part 3: Acceptance control charts