AS/NZS 3500.3:2021 Plumbing and drainage, Part 3: Stormwater drainage
- Abbreviation
- AS/NZS 3500.3:2021
- Valid from
- 28/05/2021
- Replaces
- AS/NZS 3500.3:2018 ,
- Information provider
- Standards New Zealand,
- Author
- Standards Australia, Standards New Zealand
- Information type
- New Zealand Standard,
- Format
- PDF, HARD COPY,
Description
Standard sets out the requirements for materials, design, installation and testing of roof drainage systems, surface drainage systems and subsoil drainage systems to a point of connection.
This Standard shall be read in conjunction with the New Zealand Building Code (NZBC). This Standard my be used to demonstrate compliance with the NZBC Clause E1 Surface Water.
Where alternative New Zealand Standards are referenced (e.g. NZS 5807), the New Zealand Standards shall be used for New Zealand only.
This resource is cited by:
AS/NZS 3500.3:2021 Plumbing and drainage, Part 3: Stormwater drainage
This document is CITED BY:
-
E1/AS2 (Amd 1, incorporated in Amd 12) (First Edition, Amendment 1 incorporated in Amd 12.)
AS/NZS 3500.3:2021 is cited by Acceptable Solution E1/AS2: Surface Water from 2/11/2023
This resource cites:
AS/NZS 3500.3:2021 Plumbing and drainage, Part 3: Stormwater drainage
This document CITES:
AS/NZS 3500.3:2021 cites AS/NZS 1167.1:2005 Welding and brazing - Filler metals - Filler metal for brazing and braze welding
AS/NZS 3500.3:2021 cites AS/NZS 1254:2010 PVC-U pipes and fittings for stormwater and surface water applications
AS/NZS 3500.3:2021 cites AS/NZS 1260:2017 PVC-U pipes and fittings for drain, waste and vent applications
AS/NZS 3500.3:2021 cites AS/NZS 1477:2017 PVC pipes and fittings for pressure applications
AS/NZS 3500.3:2021 cites AS/NZS 1866:1997 (R2020) Aluminium and aluminium alloys - Extruded rod, bar, solid and hollow shapes
AS/NZS 3500.3:2021 cites AS/NZS 2032:2006 Installation of PVC pipe systems
AS/NZS 3500.3:2021 cites AS/NZS 2033:2008 Installation of polyethylene pipe systems
AS/NZS 3500.3:2021 cites AS/NZS 2041.1:2011 Buried corrugated metal structures - Part 1: Design methods
AS/NZS 3500.3:2021 cites AS/NZS 2041.2:2011 Buried corrugated metal structures - Part 2: Installation
AS/NZS 3500.3:2021 cites AS/NZS 2041.4:2010 Buried corrugated metal structures - Part 4: Helically formed sinusoidal pipes
AS/NZS 3500.3:2021 cites AS/NZS 2179.1:2014 Specifications for rainwater goods, accessories and fasteners - Part 1: Metal shape or sheet rainwater goods, and metal accessories and fasteners
AS/NZS 3500.3:2021 cites AS/NZS 2280:2020 Ductile iron pipes and fittings
AS/NZS 3500.3:2021 cites AS/NZS 2566.2:2002 (R2016) Buried Flexible pipelines - Installation
AS/NZS 3500.3:2021 cites AS/NZS 2638.1:2011 Gate valves for waterworks purposes - Part 1: Metal seated
AS/NZS 3500.3:2021 cites AS/NZS 2638.2:2011 Gate valves for waterworks purposes - Part 2: Resilient seated
AS/NZS 3500.3:2021 cites AS/NZS 2648.1:1995 Underground marking tape - Non-detectable tape
AS/NZS 3500.3:2021 cites AS/NZS 2878:2000 (R2017) Timber - Classification into strength groups
AS/NZS 3500.3:2021 cites AS/NZS 3000:2018 Electrical installations - Known as the Australian/New Zealand Wiring Rules
AS/NZS 3500.3:2021 cites AS/NZS 3500.0:2021 Plumbing and drainage - Part 0: Glossary of terms
AS/NZS 3500.3:2021 cites AS/NZS 3500.1:2021 Plumbing and drainage Part 1: Water services
AS/NZS 3500.3:2021 cites AS/NZS 3725:2007 Design for installation of buried concrete pipes
AS/NZS 3500.3:2021 cites AS/NZS 3879:2011 Solvent cements and priming fluids for PVC (PVC-U and PVC-M) and ABS and ASA pipes and fittings
AS/NZS 3500.3:2021 cites AS/NZS 4058:2007 Pre cast concrete pipes (pressure and non-pressure)
AS/NZS 3500.3:2021 cites AS/NZS 4087:2011 Metallic flanges for waterworks purposes
AS/NZS 3500.3:2021 cites AS/NZS 4129:2020 Fittings for polyethylene (PE) pipes for pressure applications
AS/NZS 3500.3:2021 cites AS/NZS 4130:2018 Polyethylene (PE) pipes for pressure applications
AS/NZS 3500.3:2021 cites AS/NZS 4327:1995 (R2020) Metal-banded flexible couplings for low-pressure applications
AS/NZS 3500.3:2021 cites AS/NZS 4401:2006 (R2016) Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings - Polyethylene (PE)
AS/NZS 3500.3:2021 cites AS/NZS 4441:2017 Oriented PVC (PVC-O) pipes for pressure applications
AS/NZS 3500.3:2021 cites AS/NZS 4455.2:2010 Masonry units, pavers, flags and segmental retaining wall units - Pavers and flags
AS/NZS 3500.3:2021 cites AS/NZS 4671:2019 Steel for the reinforcement of concrete
AS/NZS 3500.3:2021 cites AS/NZS 4680:2006 (R2017) Hot-dip galvanised (zinc) coatings on fabricated ferrous articles
AS/NZS 3500.3:2021 cites AS/NZS 4765:2017 Modified PVC (PVC-M) pipes for pressure applications
AS/NZS 3500.3:2021 cites AS/NZS 5065:2005 (R2016) Polyethylene and polypropylene pipes and fittings for drainage and sewerage applications
AS/NZS 3500.3:2021 cites NZS 3631:1988 New Zealand timber grading rules - SPONSORED
AS/NZS 3500.3:2021 cites NZS 3640:2003 Chemical preservation of round and sawn timber - SPONSORED
AS/NZS 3500.3:2021 cites AS 3579-1993 Cast iron wedge gate valves for general purposes
AS/NZS 3500.3:2021 cites AS 4060-1992 (R2018) Loads on buried vitrified clay pipes
AS/NZS 3500.3:2021 cites AS 1074-1989 (R2018) Steel tubes and tubulars for ordinary service
AS/NZS 3500.3:2021 cites AS 1234-1972 Recommendations for coordinated preferred dimensions in building
AS/NZS 3500.3:2021 cites AS 1273-1991 (R2018) Unplasticized PVC (UPVC) downpipe and fittings for rainwater
AS/NZS 3500.3:2021 cites AS 1289.5.4.1-2007 (R2016) Methods of testing soils for engineering purposes Soil compaction and density tests - Compaction control test - Dry density ratio, moisture variation and moisture ratio
AS/NZS 3500.3:2021 cites AS 1289.5.6.1-1998 (R2016) Methods of testing soils for engineering purposes - Soil compaction and density tests - Compaction control test - Density index method for a cohesionless material
AS/NZS 3500.3:2021 cites AS 1379-2007 (R2017) Specification and supply of concrete
AS/NZS 3500.3:2021 cites AS 1432-2004 (R2016) Copper tubes for plumbing, gasfitting and drainage applications
AS/NZS 3500.3:2021 cites AS 1478.1-2000 (R2018) Chemical admixtures for concrete, mortar and grout - Admixtures for concrete
AS/NZS 3500.3:2021 cites AS 1604.1-2012 Specification for preservative treatment - Part 1: Sawn and round timber
AS/NZS 3500.3:2021 cites AS 1628-1999 (R2015) Water supply - Metallic gate, globe and non-return valves
AS/NZS 3500.3:2021 cites AS 1631-1994 (R2018) Cast grey and ductile iron non-pressure pipes and fittings
AS/NZS 3500.3:2021 cites AS 1646-2007 (R2018) Elastomeric seals for waterworks purposes
AS/NZS 3500.3:2021 cites AS 1657:2018 Fixed platforms, walkways, stairways and ladders - Design, construction and installation
AS/NZS 3500.3:2021 cites AS 1834.1-1991 (R2018) Material for soldering - Part 1: Solder alloys
AS/NZS 3500.3:2021 cites AS 2050:2018 Installation of roof tiles
AS/NZS 3500.3:2021 cites AS 2200-2006 Design charts for water supply and sewerage
AS/NZS 3500.3:2021 cites AS 2439.1-2007 Perforated plastics drainage and effluent pipe and fittings. - Part 1: Perforated drainage pipe and associated fittings
AS/NZS 3500.3:2021 cites AS 2865-2009 Confined spaces
AS/NZS 3500.3:2021 cites AS 3517-2007 (R2018) Capillary fittings of copper and copper alloy for non-pressure sanitary plumbing applications
AS/NZS 3500.3:2021 cites AS 3571.1-2009 Plastics piping systems - Glass-reinforced thermoplastics (GRP) systems based on unsaturated polyester (UP) resin. Part 1: Pressure and non-pressure drainage and sewerage (ISO 10467:2004 MOD)
AS/NZS 3500.3:2021 cites AS 3571.2-2009 Plastics piping systems - Glass-reinforced thermoplastics (GRP) systems based on unsaturated polyester (UP) resin. Part 2: Pressure and non-pressure water supply (ISO 10639:2004, MOD)
AS/NZS 3500.3:2021 cites AS 3600-2018 Concrete structures
AS/NZS 3500.3:2021 cites AS 3648-1993 Specification and methods of test for packaged concrete mixes
AS/NZS 3500.3:2021 cites AS 3680-2008 Polyethylene sleeving for ductile iron piping
AS/NZS 3500.3:2021 cites AS 3705-2012 Geotextiles - Identification, marking and general data
AS/NZS 3500.3:2021 cites AS 3795-1996 Copper alloy tubes for plumbing and drainage applications
AS/NZS 3500.3:2021 cites AS 3996:2019 Access covers and grates
AS/NZS 3500.3:2021 cites AS 4139-2003 (R2018) Fibre reinforced concrete pipes and fittings
AS/NZS 3500.3:2021 cites AS 4198-1994 Precast concrete access chambers for sewerage applications
AS/NZS 3500.3:2021 cites BS EN 12056-3:2000 Gravity drainage systems inside buildings. Roof drainage, layout and calculation
AS/NZS 3500.3:2021 cites Acceptable Solution E1/AS1: Surface Water
AS/NZS 3500.3:2021 cites Acceptable Solution E2/AS1: External Moisture