AS/NZS 1477:2017 PVC pipes and fittings for pressure applications
- Abbreviation
- AS/NZS 1477:2017
- Valid from
- 1/06/2017
- Information provider
- Standards New Zealand,
- Author
- Standards New Zealand, Standards Australia
- Information type
- New Zealand Standard,
- Format
- PDF, HARD COPY,
Description
This Standard provides a standard specification for manufacturers and purchasers of PVC pipe and fittings for pressure applications. This Standard provides for injection-moulded fittings with main diameters greater than DN 150 with parallel solvent-welded sockets. These fittings are predominantly imported fittings and have no specific requirements for colour or titanium dioxide to provide UV protection.
This resource is cited by:
AS/NZS 1477:2017 PVC pipes and fittings for pressure applications
This document is CITED BY:
-
G12/AS1 (Amd 13) (Third Edition, Amendment 13)
AS/NZS 1477:2017 is cited by Acceptable Solution G12/AS1: Water Supplies from 2/11/2023
-
G12/AS1 (Amd 14) (Third Edition, Amendment 14)
AS/NZS 1477:2017 is cited by Acceptable Solution G12/AS1: Water Supplies from 2/11/2023
-
AS/NZS 1260:2017
AS/NZS 1477:2017 is cited by AS/NZS 1260:2017 PVC-U pipes and fittings for drain, waste and vent applications
-
AS/NZS 3500.1:2018
AS/NZS 1477:2017 is cited by AS/NZS 3500.1:2018 Plumbing and drainage Part 1: Water services
-
AS/NZS 3500.2:2018
AS/NZS 1477:2017 is cited by AS/NZS 3500.2:2018 Plumbing and drainage Part 2: Sanitary plumbing and drainage
-
AS/NZS 3500.3:2018
AS/NZS 1477:2017 is cited by AS/NZS 3500.3:2018 Plumbing and drainage Part 3: Stormwater drainage
-
AS/NZS 3500.3:2021
AS/NZS 1477:2017 is cited by AS/NZS 3500.3:2021 Plumbing and drainage, Part 3: Stormwater drainage
-
AS/NZS 4020:2018
AS/NZS 1477:2017 is cited by AS/NZS 4020:2018 Testing of products for use in contact with drinking water
This resource cites:
AS/NZS 1477:2017 PVC pipes and fittings for pressure applications
This document CITES:
AS/NZS 1477:2017 cites AS/NZS 1462.11:1996 (R2017) Methods of test for plastics pipes and fittings - Method 11: Method for high temperature stress-relief testing of fittings
AS/NZS 1477:2017 cites AS/NZS 1462.15:1996 (R2017) Methods of test for plastics pipes and fittings - Method 15: Method for determination of vinyl chloride monomer content
AS/NZS 1477:2017 cites AS/NZS 1462.16:2006 (R2017) Methods of test for plastics pipes and fittings - Method 16: Method for high temperature testing of pipe
AS/NZS 1477:2017 cites AS/NZS 1462.19:2006 (R2017) Methods of test for plastics pipes and fittings - Method 19: C-ring test for fracture toughness of PVC pipes
AS/NZS 1477:2017 cites AS/NZS 1462.1:2006 Methods of test for plastics pipes and fittings - Method 1: Method for determining the dimensions of pipes and fittings
AS/NZS 1477:2017 cites AS/NZS 1462.20:1996 (R2017) Methods of test for plastics pipes and fittings - Method 20: Method for determination of long-term failure stress of PVC moulding compounds
AS/NZS 1477:2017 cites AS/NZS 1462.3:1998 (R2017) Methods of test for plastics pipes and fittings - Method 3: Method for determining the impact characteristics of pipes
AS/NZS 1477:2017 cites AS/NZS 1462.4:2002 (R2017) Methods of test for plastics pipes and fittings - Method 4: Method of determining reversion of UPVC pipes
AS/NZS 1477:2017 cites AS/NZS 1462.6:2008 (R2017) Methods of test for plastics pipes and fittings - Method 6: Thermoplastics pipes, fittings and assemblies for the transport of fluids under pressure - Resistance to internal pressure
AS/NZS 1477:2017 cites AS/NZS 1462.8:2008 (R2017) Methods of test for plastics pipes and fittings - Method 8: Method of testing the leaktightness of assemblies
AS/NZS 1477:2017 cites AS/NZS 2032:2006 Installation of PVC pipe systems
AS/NZS 1477:2017 cites AS/NZS 3500.0:2003 Plumbing and drainage - Glossary of terms
AS/NZS 1477:2017 cites AS/NZS 4020:2005 Testing of products for use in contact with drinking water
AS/NZS 1477:2017 cites AS 1199.1-2003 (R2016) Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
AS/NZS 1477:2017 cites AS 1646-2007 (R2018) Elastomeric seals for waterworks purposes
AS/NZS 1477:2017 cites AS 1722.2-1992 (R2017) Pipe threads of Whitworth form - Part 2: Fastening pipe threads
AS/NZS 1477:2017 cites AS 2888.1-2002 (R2017) Methods of testing plastics waste fittings -Method 1: Method of determining the suitability of connection threads of BSP form
AS/NZS 1477:2017 cites AS 681.1-2008 Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Part 1: Vulcanized rubber
AS/NZS 1477:2017 cites AS ISO 7.1-2008 (R2017) Pipe threads where pressure-tight joints are made on the threads - Dimensions, tolerances and designation
AS/NZS 1477:2017 cites AS ISO 7.2-2008 (R2017) Pipe threads where pressure-tight joints are made on the threads - Verification by means of limit gauges
AS/NZS 1477:2017 cites AS ISO/IEC 17025-2005 (R2016) General requirements for the competence of testing and calibration laboratories
AS/NZS 1477:2017 cites ISO/IEC 17050-1:2004 Conformity assessment - Supplier's declaration of conformity - Part 1: General requirements
AS/NZS 1477:2017 cites ISO/IEC 17050-2:2004 Preview Conformity assessment -- Supplier's declaration of conformity -- Part 2: Supporting documentation