AS/NZS 4020:2005 Testing of products for use in contact with drinking water
- Abbreviation
- AS/NZS 4020:2005
- Valid from
- 28/11/2005
- Replaces
- AS/NZS 4020:2002,
- Information provider
- Standards New Zealand,
- Author
- Standards New Zealand, Standards Australia
- Information type
- New Zealand Standard,
- Format
- PDF, HARD COPY,
Description
To allow water quality requirements, as adopted by the particular authority responsible for water supply quality, to be met at consumers taps. Besides the effects of materials, this quality will depend on other factors, including commissioning and operational procedures such as flushing of mains, which are the responsibility of the local water agency.
Scope
This Standard specifies requirements for the suitability of products for use in contact with drinking water, with regard to their effect on the quality of water. These products include all items such as pipes, fittings, components, and materials used in coating, protection, lining, jointing, sealing and lubrication applications in the water supply and plumbing industry.
The Standard requires that products intended for use in contact with drinking water be tested by exposure to extractant waters. Where appropriate, a scaling factor is applied to such tests to compensate for differences between laboratory and field conditions.
This Standard does not take into account possible changes in materials, methods of manufacture or installation, nor is any consideration given to the frequency of testing of products. These should be covered by relevant product Standards. As a guide, reverification testing of products to this Standard is generally desirable after a period of five years. This is consistent with the requirements of overseas bodies such as the Drinking Water Inspectorate in the United Kingdom.
Chemicals and media used directly for treating raw water to provide a suitable drinking water supply (e.g. lime, coagulants, activated carbon, ion-exchange resins) are not covered by this Standard.
This resource is cited by:
AS/NZS 4020:2005 Testing of products for use in contact with drinking water
This document is CITED BY:
-
E2/AS1 (Amd 10) (Third Edition, Amendment 10)
AS/NZS 4020:2005 is cited by Acceptable Solution E2/AS1: External Moisture from 1/02/2005
-
E2/AS1 (Amd 8) (Third Edition, Amendment 8)
AS/NZS 4020:2005 is cited by Acceptable Solution E2/AS1: External Moisture from 1/02/2005
-
E2/AS1 (Amd 5) (Third Edition, Amendment 5)
AS/NZS 4020:2005 is cited by Acceptable Solution E2/AS1: External Moisture from 1/02/2005
-
E2/AS1 (Amd 5, Errata 2) (Third Edition, Amendment 5, Errata 2)
AS/NZS 4020:2005 is cited by Acceptable Solution E2/AS1: External Moisture from 1/02/2005
-
E2/AS1 (Amd 6) (Third Edition, Amendment 6)
AS/NZS 4020:2005 is cited by Acceptable Solution E2/AS1: External Moisture from 1/02/2005
-
E2/AS1 (Amd 9) (Third Edition, Amendment 9)
AS/NZS 4020:2005 is cited by Acceptable Solution E2/AS1: External Moisture from 1/02/2005
-
E2/AS1 (Amd 7) (Third Edition, Amendment 7)
AS/NZS 4020:2005 is cited by Acceptable Solution E2/AS1: External Moisture from 1/02/2005
-
G12/AS1 (Amd 12) (Third Edition, Amendment 12)
AS/NZS 4020:2005 is cited by Acceptable Solution G12/AS1: Water Supplies from 30/09/2010
-
G12/AS1 (Third Edition, Amendment 11)
AS/NZS 4020:2005 is cited by Acceptable Solution G12/AS1: Water Supplies from 30/09/2010
-
G12/AS1 (Third Edition, Amendment 7)
AS/NZS 4020:2005 is cited by Acceptable Solution G12/AS1: Water Supplies from 30/09/2010
-
G12/AS1 (Third Edition, Amendment 8)
AS/NZS 4020:2005 is cited by Acceptable Solution G12/AS1: Water Supplies from 30/09/2010
-
G12/AS1 (Third Edition, Amendment 9)
AS/NZS 4020:2005 is cited by Acceptable Solution G12/AS1: Water Supplies from 30/09/2010
-
G12/AS1 (Third Edition, Amendment 10)
AS/NZS 4020:2005 is cited by Acceptable Solution G12/AS1: Water Supplies from 30/09/2010
-
AS 1357.1-2009
AS/NZS 4020:2005 is cited by AS 1357.1-2009 Valves primarily for use in heated water systems - Part 1: Protection valves
-
AS 1357.2-2005
AS/NZS 4020:2005 is cited by AS 1357.2-2005 (2015) Valves primarily for use in heated water systems. Part 2: Control valves
-
AS 1646-2007
AS/NZS 4020:2005 is cited by AS 1646-2007 (R2018) Elastomeric seals for waterworks purposes
-
AS 3571.1-2009
AS/NZS 4020:2005 is cited by AS 3571.1-2009 Plastics piping systems - Glass-reinforced thermoplastics (GRP) systems based on unsaturated polyester (UP) resin. Part 1: Pressure and non-pressure drainage and sewerage (ISO 10467:2004 MOD)
-
AS 3688:2016
AS/NZS 4020:2005 is cited by AS 3688:2016 Water supply and gas systems - Metallic fittings and end connectors
-
AS 4032.1-2005
AS/NZS 4020:2005 is cited by AS 4032.1-2005 Water supply - Valves for the control of heated water supply temperatures - Part 1: Thermostatic mixing valves - Materials design and performance requirements
-
AS 4032.2-2005 (R2015)
AS/NZS 4020:2005 is cited by AS 4032.2-2005 (R2015) Water supply - Valves for the control of hot water supply temperatures. Part 2: Tempering valves and end-of-line temperature-actuated devices
-
AS 4032.4:2014
AS/NZS 4020:2005 is cited by AS 4032.4:2014 Water supply - Valves for the control of heated water supply temperatures. Part 4: Thermostatically controlled taps for the control of heated water supply temperatures
-
AS 4809:2017
AS/NZS 4020:2005 is cited by AS 4809:2017 Copper pipe and fittings - Installation and commissioning
-
AS 5200.053-2008
AS/NZS 4020:2005 is cited by AS 5200.053-2008 Plumbing and drainage products - Part 053: Stainless steel pipes and tubes for pressure applications
-
AS/NZS 1477:2006
AS/NZS 4020:2005 is cited by AS/NZS 1477:2006 PVC pipes and fittings for pressure applications
-
AS/NZS 1477:2017
AS/NZS 4020:2005 is cited by AS/NZS 1477:2017 PVC pipes and fittings for pressure applications
-
AS/NZS 2032:2006
AS/NZS 4020:2005 is cited by AS/NZS 2032:2006 Installation of PVC pipe systems
-
AS/NZS 2033:2008
AS/NZS 4020:2005 is cited by AS/NZS 2033:2008 Installation of polyethylene pipe systems
-
AS/NZS 2280:2014
AS/NZS 4020:2005 is cited by AS/NZS 2280:2014 Ductile iron pipes and fittings
-
AS/NZS 2642.1:2007
AS/NZS 4020:2005 is cited by AS/NZS 2642.1:2007 Polybutylene pipe systems - Polybutylene (PB) pipe extrusion compounds
-
AS/NZS 2642.2:2008
AS/NZS 4020:2005 is cited by AS/NZS 2642.2:2008 Polybutylene pipe systems - Polybutylene (PB) pipe for hot and cold water applications
-
AS/NZS 2642.3:2008
AS/NZS 4020:2005 is cited by AS/NZS 2642.3:2008 Polybutylene pipe systems - Mechanical jointing fittings for use with polybutylene (PB) pipes for hot and cold water applications
-
AS/NZS 2712:2007
AS/NZS 4020:2005 is cited by AS/NZS 2712:2007 Solar and heat pump water heaters - Design and construction
-
AS/NZS 2845.1:2010
AS/NZS 4020:2005 is cited by AS/NZS 2845.1:2010 Water supply - Backflow prevention devices - Part 1: Materials, design and performance requirements
-
AS/NZS 3500.1:2015
AS/NZS 4020:2005 is cited by AS/NZS 3500.1:2015 Plumbing and drainage - Part 1: Water services
-
AS/NZS 3500.4:2015
AS/NZS 4020:2005 is cited by AS/NZS 3500.4:2015 Plumbing and drainage - Heated water services
-
AS/NZS 3518:2013
AS/NZS 4020:2005 is cited by AS/NZS 3518:2013 Acrylonitrile butadiene styrene (ABS) compounds; pipes and fittings for pressure applications
-
AS/NZS 3666.1:2011
AS/NZS 4020:2005 is cited by AS/NZS 3666.1:2011 Air-handling and water systems of buildings - Microbial Control - Design, installation and commissioning
-
AS/NZS 3690:2009
AS/NZS 4020:2005 is cited by AS/NZS 3690:2009 Installation of ABS pipe systems
-
AS/NZS 3879:2011
AS/NZS 4020:2005 is cited by AS/NZS 3879:2011 Solvent cements and priming fluids for PVC (PVC-U and PVC-M) and ABS and ASA pipes and fittings
-
AS/NZS 4129:2008
AS/NZS 4020:2005 is cited by AS/NZS 4129:2008 Fittings for polyethylene (PE) pipes for pressure applications
-
AS/NZS 4130:2009
AS/NZS 4020:2005 is cited by AS/NZS 4130:2009 Polyethylene (PE) pipes for pressure applications
-
AS/NZS 4765:2007
AS/NZS 4020:2005 is cited by AS/NZS 4765:2007 Modified polyvinyl chloride (PVC-M) pipes for pressure applications
-
DoC backcountry hut manual 2009 (Version 4)
AS/NZS 4020:2005 is cited by Hut procurement manual for backcountry huts
-
NASH Building Envelope Solutions: 2019
AS/NZS 4020:2005 is cited by NASH Building Envelope Solutions: 2019 - Light Steel Framed Buildings.
This resource cites:
AS/NZS 4020:2005 Testing of products for use in contact with drinking water
This document CITES:
AS/NZS 4020:2005 cites AS/NZS 1477:1999 PVC pipes and fittings for pressure applications
AS/NZS 4020:2005 cites AS/NZS 2031:2001 Selection of containers and preservation of water samples for microbiological analysis
AS/NZS 4020:2005 cites AS/NZS 3350.2.21:1999 Safety of household and similar electrical appliances - Part 2.21: Particular requirements - Storage water heaters
AS/NZS 4020:2005 cites AS/NZS 3500.4:2003 Plumbing and drainage - Part 4: Heated water services
AS/NZS 4020:2005 cites AS 1012.8.1-2000 Methods of testing concrete. Method for making and curing concrete - Compression and indirect tensile test specimens
AS/NZS 4020:2005 cites AS 1012.8.2-2000 Methods of testing concrete. Method for making and curing concrete - Flexure test specimens
AS/NZS 4020:2005 cites AS 4276.2-1995 (R2013) Water microbiology - Part 2: Culture media diluents and reagents
AS/NZS 4020:2005 cites AS 5601-2004 Gas installations
AS/NZS 4020:2005 cites Australian drinking water guidelines, 1996 / National Health and Medical Research Council, Agriculture and Resource Management Council of Australia and New Zealand.
AS/NZS 4020:2005 cites BS 5586-1:1978 Sensory analysis apparatus Part 1: Specification for wine-tasting glass
AS/NZS 4020:2005 cites BS 6068-2.10:1984 Water quality. Physical, chemical and biochemical methods - Method 2.10: Determination of ammonium: potentiometric method
AS/NZS 4020:2005 cites BS 6068-2.11:1984 Water quality. Physical, chemical and biochemical methods - Method 2.11: Determination of ammonium: manual spectrometric method
AS/NZS 4020:2005 cites BS 6068-2.12:1990 Water quality. Physical, chemical and biochemical methods - Method 2.12: Determination of phenol index: 4-aminoantipyrine (4-aminophenazone) spectrometric methods after distillation
AS/NZS 4020:2005 cites BS 6068-2.17:1986 Water quality. Physical, chemical and biochemical methods - Method 2.17: Methods for determination of total cyanide
AS/NZS 4020:2005 cites BS 6068-2.18:1986 Water quality. Physical, chemical and biochemical methods. Method 2.18: Methods for the determination of easily liberatable cyanide
AS/NZS 4020:2005 cites BS 6068-2.19:1986 Water quality. Physical, chemical and biochemical methods - Method 2.19: Method for determination of cyanogen chloride
AS/NZS 4020:2005 cites BS 6068-2.20:1986 Water quality. Physical, chemical and biochemical methods - Method 2.20: Method for determination of cyanide by diffusion at pH 6
AS/NZS 4020:2005 cites BS 6068-2.24:1986 Water quality - Physical, chemical and biochemical methods - Method 2.24: Method for the determination of non-ionic surfactants using Dragendorff reagent
AS/NZS 4020:2005 cites BS 6068-2.29:1987 Water Quality - Physical, Chemical And Biochemical Methods - Method 2.29: Determination Of Cobalt, Nickel, Copper, Zinc, Cadmium And Lead: Flame Atomic Absorption Spectrometric Methods
AS/NZS 4020:2005 cites BS 6068-2.2:1983 Water quality. Physical, chemical and biochemical methods - Method 2.2: Determination of iron: 1,10-phenanthroline photometric method
AS/NZS 4020:2005 cites BS 6068-2.31:1987 Water quality. Physical, chemical and biochemical methods. Method 2.31: Method for determination of manganese: formaldoxime spectrometric method
AS/NZS 4020:2005 cites BS 6068-2.33:1987 Water quality - Physical, chemical and biochemical methods - Method 2.33: Method for the determination of ammonium: automated spectrometric method
AS/NZS 4020:2005 cites BS 6068-2.34:1988 Water quality - Physical, chemical and biochemical methods - Method 2.34: Method for the determination of the chemical oxygen demand
AS/NZS 4020:2005 cites BS 6068-2.36:1989 Water quality - Physical, chemical and biochemical methods - Method 2.36: Spectrometric method for the determination of nitrate using sulphosalicylic acid
AS/NZS 4020:2005 cites BS 6068-2.37:1990 Water quality. Physical, chemical and biochemical methods. Method 2.37: Method for the determination of chloride via a silver nitrate titration with chromate indicator (Mohr's method)
AS/NZS 4020:2005 cites BS 6068-2.39:1991 Water quality. Physical, chemical and biochemical methods. Method 2.39: Method for the determination of sulphate using barium chloride and gravimetry
AS/NZS 4020:2005 cites BS 6068-2.40:1991 Water quality. Physical, chemical and biochemical methods - Method 2.40: Method for the determination of borate by spectrometry using azomethine-H
AS/NZS 4020:2005 cites BS 6068-2.41:1993 Water quality. Physical, chemical and biochemical methods - Method 2.41: Determination of fluoride: electrochemical probe method for potable and lightly polluted water
AS/NZS 4020:2005 cites BS 6068-2.42:1993 Water quality. Physical, chemical and biochemical methods - Method 2.42: Determination of sodium and potassium: determination of sodium by atomic absorption spectrometry
AS/NZS 4020:2005 cites BS 6068-2.43:1993 Water quality. Physical, chemical and biochemical methods - Method 2.43: Determination of sodium and potassium: determination of potassium by atomic absorption spectrometry
AS/NZS 4020:2005 cites BS 6068-2.44:1993 Water quality. Physical, chemical and biochemical methods - Method 2.44: Determination of sodium and potassium: determination of sodium and potassium by flame emission spectrometry
AS/NZS 4020:2005 cites BS 6068-2.45:1993 Water quality. Physical, chemical and biochemical methods - Method 2.45: Determination of selenium by atomic absorption spectrometry
AS/NZS 4020:2005 cites BS 6068-2.47:1995 Water quality. Physical, chemical and biochemical methods - Method 2.47: Determination of chromium (VI). Spectrometric method using 1,5-diphenylcarbazide
AS/NZS 4020:2005 cites BS 6068-2.48:1995 Water quality. Physical, chemical and biochemical methods - Method 2.48: Determination of inorganically bound total fluoride after digestion and distillation
AS/NZS 4020:2005 cites BS 6068-2.49:1995 Water quality. Physical, chemical and biochemical methods - Method 2.49: Determination of aluminium. Spectrometric method using pyrocatechol violet
AS/NZS 4020:2005 cites BS 6068-2.50:1995 Water quality. Physical, chemical and biochemical methods - Method 2.50: Determination of pH
AS/NZS 4020:2005 cites BS 6068-2.69:2000 Water quality - Part 2.69: Physical, chemical and biochemical methods - Guidelines for selective immunoassays for the determination of plant treatment and pesticide agents
AS/NZS 4020:2005 cites BS 6068-2.7:1984 Water quality. Physical, chemical and biochemical methods - Method 2.7: Determination of ammonium: distillation and titration method
AS/NZS 4020:2005 cites BS 6068-2.8:1984 Water quality. Physical, chemical and biochemical methods - Method 2.8: Determination of calcium content: EDTA titrimetric method
AS/NZS 4020:2005 cites BS 6068-2.9:1984 Water quality. Physical, chemical and biochemical methods - Method 2.9: Determination of the sum of calcium and magnesium: EDTA titrimetric method
AS/NZS 4020:2005 cites BS 748:1982 Specification for haemocytometer and particle counting chambers
AS/NZS 4020:2005 cites ISO 2230:2002 Rubber products - Guidelines for storage
AS/NZS 4020:2005 cites ISO 3696:1987 Water for analytical laboratory use - Specification and test methods
AS/NZS 4020:2005 cites ISO 5814:1990 Water quality - Determination of dissolved oxygen - Electrochemical probe method
AS/NZS 4020:2005 cites ISO 7027:1999 Water quality - Determination of turbidity
AS/NZS 4020:2005 cites ISO 7393-2:1985 Water quality - Determination of free chlorine and total chlorine - Part 2: Colorimetric method using N,N-diethyl-1,4-phenylenediamine, for routine control purposes
AS/NZS 4020:2005 cites ISO 7887:1994 Water quality - Examination and determination of colour
AS/NZS 4020:2005 cites Standard Methods for the Examination of Water and Wastewater, 20th Edition