AS/NZS 2642.2:2008 Polybutylene pipe systems - Polybutylene (PB) pipe for hot and cold water applications
- Abbreviation
- AS/NZS 2642.2:2008
- Amendment
- A1 - incorporated.
- Valid from
- 18/03/2008
- Replaces
- AS/NZS 2642.2:1994,
- Information provider
- Standards New Zealand,
- Author
- Standards New Zealand, Standards Australia
- Information type
- New Zealand Standard,
- Format
- PDF, HARD COPY,
Description
This Standard specifies materials, dimensions and performance requirements for polybutylene pipe for hot and cold water plumbing applications, including domestic, industrial and agricultural purposes.
In the interests of serviceability of the pipe, and irrespective of the calculated minimum wall thickness, this Standard does not apply to a wall thickness of less than 1.6 mm.
Scope
The Standard applies to pipes of pressure class PN16 up to 28 mm nominal outside diameter.
This resource is cited by:
AS/NZS 2642.2:2008 Polybutylene pipe systems - Polybutylene (PB) pipe for hot and cold water applications
This document is CITED BY:
-
G12/AS1 (Amd 13) (Third Edition, Amendment 13)
AS/NZS 2642.2:2008 is cited by Acceptable Solution G12/AS1: Water Supplies from 10/10/2011
-
G12/AS1 (Third Edition, Amendment 9)
AS/NZS 2642.2:2008 is cited by Acceptable Solution G12/AS1: Water Supplies from 10/10/2011
-
G12/AS1 (Third Edition, Amendment 8)
AS/NZS 2642.2:2008 is cited by Acceptable Solution G12/AS1: Water Supplies from 10/10/2011
-
G12/AS1 (Third Edition, Amendment 10)
AS/NZS 2642.2:2008 is cited by Acceptable Solution G12/AS1: Water Supplies from 10/10/2011
-
G12/AS1 (Amd 12) (Third Edition, Amendment 12)
AS/NZS 2642.2:2008 is cited by Acceptable Solution G12/AS1: Water Supplies from 10/10/2011
-
G12/AS1 (Third Edition, Amendment 11)
AS/NZS 2642.2:2008 is cited by Acceptable Solution G12/AS1: Water Supplies from 10/10/2011
-
G14/VM1 (Amd 5) (Second Edition, Amendment 5)
AS/NZS 2642.2:2008 is cited by Verification Method G14/VM1: Industrial Liquid Waste from 10/10/2011
-
G14/VM1 (Second Edition, Amendment 4)
AS/NZS 2642.2:2008 is cited by Verification Method G14/VM1: Industrial Liquid Waste from 10/10/2011
-
G14/VM1 (Amd 6) (Second Edition, Amendment 6)
AS/NZS 2642.2:2008 is cited by Verification Method G14/VM1: Industrial Liquid Waste from 10/10/2011
-
AS/NZS 2642.3:2008
AS/NZS 2642.2:2008 is cited by AS/NZS 2642.3:2008 Polybutylene pipe systems - Mechanical jointing fittings for use with polybutylene (PB) pipes for hot and cold water applications
-
AS/NZS 3500.1:2015
AS/NZS 2642.2:2008 is cited by AS/NZS 3500.1:2015 Plumbing and drainage - Part 1: Water services
-
AS/NZS 3500.1:2018
AS/NZS 2642.2:2008 is cited by AS/NZS 3500.1:2018 Plumbing and drainage Part 1: Water services
-
AS/NZS 3500.4:2015
AS/NZS 2642.2:2008 is cited by AS/NZS 3500.4:2015 Plumbing and drainage - Heated water services
-
AS/NZS 3500.4:2018
AS/NZS 2642.2:2008 is cited by AS/NZS 3500.4:2018 Plumbing and drainage Part 4: Heated water services
-
AS/NZS 3500.4:2021
AS/NZS 2642.2:2008 is cited by AS/NZS 3500.4:2021 Plumbing and drainage Part 4: Heated water services
-
AS/NZS 4020:2018
AS/NZS 2642.2:2008 is cited by AS/NZS 4020:2018 Testing of products for use in contact with drinking water
-
NZS 4515:2009
AS/NZS 2642.2:2008 is cited by NZS 4515:2009 Fire sprinkler systems for life safety in sleeping occupancies (up to 2000 square metres) - SPONSORED
-
NZS 4541:2013
AS/NZS 2642.2:2008 is cited by NZS 4541:2013 Automatic fire sprinkler systems
-
NZS 4541:2020
AS/NZS 2642.2:2008 is cited by NZS 4541:2020 Automatic fire sprinkler systems
This resource cites:
AS/NZS 2642.2:2008 Polybutylene pipe systems - Polybutylene (PB) pipe for hot and cold water applications
This document CITES:
AS/NZS 2642.2:2008 cites AS/NZS 1462.14:1996 (R2017) Methods of test for plastics pipes and fittings - Method 14: Method for determination of the light transmission of pipe
AS/NZS 2642.2:2008 cites AS/NZS 1462.1:2006 Methods of test for plastics pipes and fittings - Method 1: Method for determining the dimensions of pipes and fittings
AS/NZS 2642.2:2008 cites AS/NZS 1462.29:2006 Methods of test for plastics pipes and fittings - Method 29: Plastics piping and ducting systems - Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation
AS/NZS 2642.2:2008 cites AS/NZS 1462.6:2008 (R2017) Methods of test for plastics pipes and fittings - Method 6: Thermoplastics pipes, fittings and assemblies for the transport of fluids under pressure - Resistance to internal pressure
AS/NZS 2642.2:2008 cites AS/NZS 2642.1:2007 Polybutylene pipe systems - Polybutylene (PB) pipe extrusion compounds
AS/NZS 2642.2:2008 cites AS/NZS 3500.0:2003 Plumbing and drainage - Glossary of terms
AS/NZS 2642.2:2008 cites AS/NZS 4020:2005 Testing of products for use in contact with drinking water
AS/NZS 2642.2:2008 cites AS/NZS 4131:2003 Polyethylene (PE) compounds for pressure pipes and fittings
AS/NZS 2642.2:2008 cites SANZ/SAA HB 18.28:1991 Guidelines for third-party certification and accreditation - Guide 28 - General rules for a model third-party certification system for products
AS/NZS 2642.2:2008 cites AS 1199.1-2003 (R2016) Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
AS/NZS 2642.2:2008 cites HB 18.28-2005 Conformity assessment - Guidance on a third-party certification system for products
AS/NZS 2642.2:2008 cites ISO 9080:2003 Plastics piping and ducting systems - Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation