Acceptable Solution G12/AS1: Water Supplies
- Abbreviation
- G12/AS1
- Amendment
- 9
- Version
- Third Edition, Amendment 9
- Valid to
- 30/05/2017
- Valid from
- 14/02/2014
This resource is no longer current. G12/AS1 (Amd 14) (Third Edition, Amendment 14),
- Information provider
- Ministry of Business, Innovation and Employment,
- Information type
- Acceptable Solution,
- Format
- PDF,
Description
Acceptable Solution G12/AS1 provides a means of compliance with Building Code Clause G12 Water Supplies. G12 requires the safe supply, storage, reticulation and delivery of hot and cold water.
This clause requires buildings provided with water outlets, sanitary fixtures or sanitary appliances to have safe and adequate water supplies (including where hot water is necessary).
It sets out requirements to avoid scalding, injury, leaks, contamination, illness and the prevention of legionella growth.
Scope
This Acceptable Solution applies to below ground and above ground piped water supply systems.
This resource is not cited by any other resources.
Acceptable Solution G12/AS1: Water Supplies
This document is not CITED BY any other resources:
This resource cites:
Acceptable Solution G12/AS1: Water Supplies
This document CITES:
G12/AS1 cites AS/NZS 1477:2006 PVC pipes and fittings for pressure applications from 30/09/2010
G12/AS1 cites AS/NZS 2032:2006 Installation of PVC pipe systems from 30/09/2010
G12/AS1 cites AS/NZS 2642.1:2007 Polybutylene pipe systems - Polybutylene (PB) pipe extrusion compounds from 10/10/2011
G12/AS1 cites AS/NZS 2642.2:2008 Polybutylene pipe systems - Polybutylene (PB) pipe for hot and cold water applications from 10/10/2011
G12/AS1 cites AS/NZS 2642.3:2008 Polybutylene pipe systems - Mechanical jointing fittings for use with polybutylene (PB) pipes for hot and cold water applications from 10/10/2011
G12/AS1 cites AS/NZS 2845.1:2010 Water supply - Backflow prevention devices - Part 1: Materials, design and performance requirements from 10/10/2011
G12/AS1 cites AS/NZS 3500.1:2003 Plumbing and drainage - Water services from 1/12/2007
G12/AS1 cites AS/NZS 3500.4:2003 Plumbing and drainage - Part 4: Heated water services from 1/12/2007
G12/AS1 cites AS/NZS 4020:2005 Testing of products for use in contact with drinking water from 30/09/2010
G12/AS1 cites AS/NZS 4129:2008 Fittings for polyethylene (PE) pipes for pressure applications from 30/09/2010
G12/AS1 cites AS/NZS 4130:2009 Polyethylene (PE) pipes for pressure applications from 30/09/2010
G12/AS1 cites AS/NZS 5000.1:2005 (R2016) Electric cables - Polymeric insulated - For working voltages up to and including 0.6/1 (1.2) kV from 30/09/2010
G12/AS1 cites AS/NZS 5000.2:2006 (R2016) Electric cables - Polymeric insulated - For working voltages up to and including 450/750 V from 10/10/2011
G12/AS1 cites AS/NZS 60335.2.35:2004 Household and similar electrical appliances - Particular requirements for instantaneous water heaters from 14/02/2014
G12/AS1 cites NZS 3501:1976 Specification for copper tubes for water, gas, and sanitation - SPONSORED from 1/12/2007
G12/AS1 cites NZS 4602:1988 Low pressure copper thermal storage electric water heaters - SPONSORED from 1/12/2007
G12/AS1 cites NZS 4603:1985 Installation of low pressure thermal storage electric water heaters with copper cylinders (open vented systems) - SPONSORED from 1/12/2007
G12/AS1 cites NZS 4606.1:1989 Storage water heaters - General requirements - SPONSORED from 1/12/2007
G12/AS1 cites NZS 4606.2:1989 Storage water heaters - Specific requirements for water heaters with single shells from 1/12/2007
G12/AS1 cites NZS 4606.3:1992 Storage water heaters - Specific requirements for water heaters with composite shells from 1/12/2007
G12/AS1 cites NZS 4607:1989 Installation of thermal storage electric water heaters: valve vented systems - SPONSORED from 1/12/2007
G12/AS1 cites NZS 4608:1992 Control valves for hot water systems - SPONSORED from 1/12/2007
G12/AS1 cites NZS 4617:1989 Tempering (3-port mixing) valves - SPONSORED from 1/12/2007
G12/AS1 cites NZS 5807:1980 Code of practice for industrial identification by colour, wording or other coding - SPONSORED from 1/12/2007
G12/AS1 cites NZS 6214:1988 Thermostats and thermal cutouts for domestic thermal storage electric water heaters (alternating current only) - SPONSORED from 1/12/2007
G12/AS1 cites NZS 7601:1978 Specification for polyethylene pipe (Type 3) for cold water services - SPONSORED from 1/12/2007
G12/AS1 cites NZS 7602:1977 Specification for polyethylene pipe (Type 5) for cold water services - SPONSORED from 1/12/2007
G12/AS1 cites NZS 7610:1991 Blue polyethylene pipes up to nominal size 63 for below ground use for potable water - SPONSORED from 1/12/2007
G12/AS1 cites NZS/BS 1387:1985 Specification for screwed and socketed steel tubes and tubulars and for plain end steel tubes suitable for welding or screwing to BS 21 pipe threads from 1/12/2007
G12/AS1 cites AS 1308-1987 (R2016) Electric water heaters - Thermostats and thermal cutouts from 1/12/2007
G12/AS1 cites AS 1357.1-2009 Valves primarily for use in heated water systems - Part 1: Protection valves from 30/09/2010
G12/AS1 cites AS 1357.2-2005 (2015) Valves primarily for use in heated water systems. Part 2: Control valves from 30/09/2010
G12/AS1 cites AS 2845.3-1993 Water supply - Mechanical backflow prevention devices. Part 3: Field testing and maintenance from 25/02/2004
G12/AS1 cites BS EN 1567:1999 Building valves. Water pressure reducing valves and combination water reducing valves. Requirements and tests. from 30/09/2010
G12/AS1 cites BS 6920-1:2000 Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water. Part 1: 2000 Specification from 30/09/2010
G12/AS1 cites BS 6920-2-1:2000+A3:2008 Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water. Methods of test . Samples for testing from 30/09/2010
G12/AS1 cites BS 6920-2.2.1:2000+A3:2014 Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water. Methods of test . Odour and flavour of water. General method of test from 30/09/2010
G12/AS1 cites BS 6920-2.2.2:2000+A1:2014 Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water - Methods of test - Odour and flavour of water. Method of testing odours a from 30/09/2010
G12/AS1 cites BS 6920-2.2.3:2000+A2:2014 Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of water. Methods of test. Odour and flavour of water. Method of testing tastes imparte from 30/09/2010
G12/AS1 cites BS 6920-2.3:2000+A1:2014 Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water. Methods of test . Appearance of water from 30/09/2010
G12/AS1 cites BS 6920-2.4:2000+A1:2014 Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of water. Methods of test. Growth of aquatic micro-organisms test from 30/09/2010
G12/AS1 cites BS 6920-2.5:2000+A2:2014 Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of water. Methods of test. The extraction of substances that may be of concern to public from 30/09/2010
G12/AS1 cites BS 6920-2.6:2000+A2:2014 Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of water. Methods of test. The extraction of metals from 30/09/2010
G12/AS1 cites BS 6920-3:2000 Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water. High temperature tests from 30/09/2010
G12/AS1 cites BS EN 1490:2000 Building valves. Combined temperature and pressure relief valves. Tests and requirements
G12/AS1 cites BS EN 1491:2000 Building valves. Expansion valves. Tests and requirements from 30/09/2010
G12/AS1 cites NZ Backflow Testing Standard - Field testing of backflow prevention devices and verification of air gaps from 10/10/2011
G12/AS1 cites Gas Regulations 1993 from 1/12/2007