NZS/BS 1387:1985 Specification for screwed and socketed steel tubes and tubulars and for plain end steel tubes suitable for welding or screwing to BS 21 pipe threads
- Abbreviation
- NZS/BS 1387:1985
- Amendment
- Amendment 1 - appended. Published 31/05/1989
- Valid from
- 30/10/1985
- Information provider
- Standards New Zealand,
- Author
- Standards New Zealand
British Standards Institution - Information type
- New Zealand Standard,
- Format
- PDF, HARD COPY,
Description
This Standard specifies requirements for screwed and socketed steel tubes and tubulars and for plain end steel tubes suitable for welding or for screwing to BS 21 pipe threads
Scope
This Standard is applicable to tubes of nominal size DN8 to DN 150 in three series of thickness, designated light, medium and heavy.
This resource is cited by:
NZS/BS 1387:1985 Specification for screwed and socketed steel tubes and tubulars and for plain end steel tubes suitable for welding or screwing to BS 21 pipe threads
This document is CITED BY:
-
G10/AS1 (Amd 8) (First Edition, Amendment 8)
NZS/BS 1387:1985 is cited by Acceptable Solution G10/AS1: Piped Services from 1/12/1995
-
G10/AS1 (First Edition, Amendment 7)
NZS/BS 1387:1985 is cited by Acceptable Solution G10/AS1: Piped Services from 1/12/1995
-
G10/AS1 (First Edition, Amendment 6)
NZS/BS 1387:1985 is cited by Acceptable Solution G10/AS1: Piped Services from 1/12/1995
-
G10/AS1 (Amd 5) (First Edition, Amendment 5)
NZS/BS 1387:1985 is cited by Acceptable Solution G10/AS1: Piped Services from 1/12/1995
-
G12/AS1 (Third Edition, Amendment 10)
NZS/BS 1387:1985 is cited by Acceptable Solution G12/AS1: Water Supplies from 1/12/2007
-
G12/AS1 (Amd 12) (Third Edition, Amendment 12)
NZS/BS 1387:1985 is cited by Acceptable Solution G12/AS1: Water Supplies from 1/12/2007
-
G12/AS1 (Third Edition, Amendment 11)
NZS/BS 1387:1985 is cited by Acceptable Solution G12/AS1: Water Supplies from 1/12/2007
-
G12/AS1 (Third Edition, Amendment 7)
NZS/BS 1387:1985 is cited by Acceptable Solution G12/AS1: Water Supplies from 1/12/2007
-
G12/AS1 (Third Edition, Amendment 8)
NZS/BS 1387:1985 is cited by Acceptable Solution G12/AS1: Water Supplies from 1/12/2007
-
G12/AS1 (Third Edition, Amendment 9)
NZS/BS 1387:1985 is cited by Acceptable Solution G12/AS1: Water Supplies from 1/12/2007
-
G14/VM1 (Amd 6) (Second Edition, Amendment 6)
NZS/BS 1387:1985 is cited by Verification Method G14/VM1: Industrial Liquid Waste from 21/06/2007
-
G14/VM1 (Amd 5) (Second Edition, Amendment 5)
NZS/BS 1387:1985 is cited by Verification Method G14/VM1: Industrial Liquid Waste from 21/06/2007
-
G14/VM1 (Second Edition, Amendment 4)
NZS/BS 1387:1985 is cited by Verification Method G14/VM1: Industrial Liquid Waste from 21/06/2007
-
G14/VM1 (Amd 3) (Second Edition, Amendment 3)
NZS/BS 1387:1985 is cited by Verification Method G14/VM1: Industrial Liquid Waste from 21/06/2007
-
AS/NZS 3500.1:2003
NZS/BS 1387:1985 is cited by AS/NZS 3500.1:2003 Plumbing and drainage - Water services
-
AS/NZS 3500.1:2015
NZS/BS 1387:1985 is cited by AS/NZS 3500.1:2015 Plumbing and drainage - Part 1: Water services
-
AS/NZS 3500.2:2003
NZS/BS 1387:1985 is cited by AS/NZS 3500.2:2003 Plumbing and drainage - Sanitary plumbing and drainage
-
AS/NZS 3500.2:2015
NZS/BS 1387:1985 is cited by AS/NZS 3500.2:2015 Plumbing and drainage - Part 2: Sanitary plumbing and drainage
-
NZS 4510:2008
NZS/BS 1387:1985 is cited by NZS 4510:2008 Fire hydrant systems for buildings - SPONSORED
-
NZS 5261:2003
NZS/BS 1387:1985 is cited by NZS 5261:2003 Gas installation
-
NZS/BS 21:1985
NZS/BS 1387:1985 is cited by NZS/BS 21:1985 Specification for pipe threads for tubes and fittings where pressure-tight joints are made on the threads (metric dimensions)
This resource cites:
NZS/BS 1387:1985 Specification for screwed and socketed steel tubes and tubulars and for plain end steel tubes suitable for welding or screwing to BS 21 pipe threads
This document CITES:
NZS/BS 1387:1985 cites BS 18-1:1970 Methods for tensile testing of metals. Non-ferrous metals
NZS/BS 1387:1985 cites BS 18-2:1971 Methods for tensile testing of metals. Steel (general)
NZS/BS 1387:1985 cites BS 18-3:1971 Methods for tensile testing of metals. Steel sheet and strip (less than 3 mm and not less than 0.5 mm thick)
NZS/BS 1387:1985 cites BS 18-4:1971 Methods for tensile testing of metals. Steel tubes
NZS/BS 1387:1985 cites BS 21:1985 Specification for pipe threads for tubes and fittings where pressure-tight joints are made on the threads (metric dimensions)
NZS/BS 1387:1985 cites BS 3894-1:1965 Method of converting elongation values for steel - Part 1: Carbon and low alloy steels