NZS 4602:1988 Low pressure copper thermal storage electric water heaters - SPONSORED
- Abbreviation
- NZS 4602:1988
- Amendment
- Amendment 1 - appended. Published 30/03/1990.
- Valid from
- 30/05/1988
- Information provider
- Standards New Zealand,
- Author
- Standards New Zealand
- Information type
- New Zealand Standard,
Description
This Standard applies to thermostatically controlled thermal storage electric water heaters designed to work at pressures not exceeding 12mH2O (120 kPa).
The heaters are of vertical cylindrical form with copper vessels of 6.5 to 450 litres capacity, and are suitable for installation either open vented to NZS 4603 or valve vented to NZS 4607.
Water heaters to this Standard are not intended for installation in other than a vertical position.
Thermal storage water heaters for working pressures in excess of 12 mH2O (120 kPa) are specified in NZS 4606.
This resource is cited by:
NZS 4602:1988 Low pressure copper thermal storage electric water heaters - SPONSORED
This document is CITED BY:
-
G12/AS1 (Third Edition, Amendment 10)
NZS 4602:1988 is cited by Acceptable Solution G12/AS1: Water Supplies from 1/12/2007
-
G12/AS1 (Third Edition, Amendment 9)
NZS 4602:1988 is cited by Acceptable Solution G12/AS1: Water Supplies from 1/12/2007
-
G12/AS1 (Third Edition, Amendment 8)
NZS 4602:1988 is cited by Acceptable Solution G12/AS1: Water Supplies from 1/12/2007
-
G12/AS1 (Third Edition, Amendment 7)
NZS 4602:1988 is cited by Acceptable Solution G12/AS1: Water Supplies from 1/12/2007
-
G12/AS1 (Third Edition, Amendment 11)
NZS 4602:1988 is cited by Acceptable Solution G12/AS1: Water Supplies from 1/12/2007
-
G12/AS1 (Amd 12) (Third Edition, Amendment 12)
NZS 4602:1988 is cited by Acceptable Solution G12/AS1: Water Supplies from 1/12/2007
-
G12/AS1 (Amd 13) (Third Edition, Amendment 13)
NZS 4602:1988 is cited by Acceptable Solution G12/AS1: Water Supplies from 1/12/2007
-
AS/NZS 3500.4:2003
NZS 4602:1988 is cited by AS/NZS 3500.4:2003 Plumbing and drainage - Part 4: Heated water services
-
AS/NZS 4692.2:2005
NZS 4602:1988 is cited by AS/NZS 4692.2:2005 (R2016) Electric water heaters - Minimum Energy Performance Standards (MEPS) requirements and energy labelling
-
NZS 4305:1996
NZS 4602:1988 is cited by NZS 4305:1996 Energy efficiency - domestic type hot water systems - SPONSORED
-
NZS 4603:1985
NZS 4602:1988 is cited by NZS 4603:1985 Installation of low pressure thermal storage electric water heaters with copper cylinders (open vented systems) - SPONSORED
-
NZS 4606.1:1989
NZS 4602:1988 is cited by NZS 4606.1:1989 Storage water heaters - General requirements - SPONSORED
-
NZS 4607:1989
NZS 4602:1988 is cited by NZS 4607:1989 Installation of thermal storage electric water heaters: valve vented systems - SPONSORED
-
NZS 4608:1992
NZS 4602:1988 is cited by NZS 4608:1992 Control valves for hot water systems - SPONSORED
-
NZS 4613:1986
NZS 4602:1988 is cited by NZS 4613:1986 Domestic solar water heaters - SPONSORED
This resource cites:
NZS 4602:1988 Low pressure copper thermal storage electric water heaters - SPONSORED
This document CITES:
NZS 4602:1988 cites NZS 3501:1976 Specification for copper tubes for water, gas, and sanitation - SPONSORED
NZS 4602:1988 cites NZS 4603:1985 Installation of low pressure thermal storage electric water heaters with copper cylinders (open vented systems) - SPONSORED
NZS 4602:1988 cites NZS 4607:1989 Installation of thermal storage electric water heaters: valve vented systems - SPONSORED
NZS 4602:1988 cites NZS 6300:1992 Approval and test specification - General requirements for household and similar electrical appliances (=AS 3300-1992)
NZS 4602:1988 cites BS 1400:1985 Specification for copper alloy ingots and copper alloy and high conductivity copper castings
NZS 4602:1988 cites BS 1845:1984 Specification for filler metals for brazing
NZS 4602:1988 cites BS 21:1985 Specification for pipe threads for tubes and fittings where pressure-tight joints are made on the threads (metric dimensions)
NZS 4602:1988 cites BS 2779:1986 Specification for pipe threads for tubes and fittings where pressure-tight joints are not made on the threads (metric dimensions)
NZS 4602:1988 cites BS 2870:1980 Specification for rolled copper and copper alloys: sheet, strip and foil
NZS 4602:1988 cites BS 476-4:1970 Fire tests on building materials and structures. Non-combustibility test for materials