HB 18.28-2005 Conformity assessment - Guidance on a third-party certification system for products
- Abbreviation
- HB 18.28-2005
- Valid from
- 21/11/2005
- Replaces
- SANZ/SAA HB 18.28:1991, ,
- Information provider
- Intertek Inform,
- Author
- Standards Australia
- Information type
- Handbook,
- Format
- PDF, HARD COPY,
Description
Provides guidance which is applicable to a third-party product certification system for determining the conformity of a product with specified requirements by assessment and surveillance of the quality system and testing of samples of the product.
Identical with and reproduced from ISO/IEC Guide 28:2004.
Scope
This Guide gives general guidelines for a specific product certification system.
It is applicable to a third-party product certification system for determining the conformity of a product with specified requirements through
- initial testing of samples of the product,
- assessment and surveillance of the involved quality system, and
- surveillance by testing of product samples taken from the factory or the open market, or both.
This Guide addresses conditions for use of a mark of conformity and conditions for granting a certificate of conformity.
This system corresponds to system 5 product certification system as described in ISO/IEC Guide 67.
A model checklist of requirements for a third-party certification system is given in Annex A.
This resource is cited by:
HB 18.28-2005 Conformity assessment - Guidance on a third-party certification system for products
This document is CITED BY:
-
AS 4032.1-2005
HB 18.28-2005 is cited by AS 4032.1-2005 Water supply - Valves for the control of heated water supply temperatures - Part 1: Thermostatic mixing valves - Materials design and performance requirements
-
AS 4032.4:2014
HB 18.28-2005 is cited by AS 4032.4:2014 Water supply - Valves for the control of heated water supply temperatures. Part 4: Thermostatically controlled taps for the control of heated water supply temperatures
-
AS/NZS 1260:2009
HB 18.28-2005 is cited by AS/NZS 1260:2009 PVC-U Pipes and fittings for drain, waste and vent applications
-
AS/NZS 1477:2006
HB 18.28-2005 is cited by AS/NZS 1477:2006 PVC pipes and fittings for pressure applications
-
AS/NZS 1546.1:2008
HB 18.28-2005 is cited by AS/NZS 1546.1:2008 On-site domestic wastewater treatment units: Septic tanks
-
AS/NZS 2642.2:2008
HB 18.28-2005 is cited by AS/NZS 2642.2:2008 Polybutylene pipe systems - Polybutylene (PB) pipe for hot and cold water applications
-
AS/NZS 2642.3:2008
HB 18.28-2005 is cited by AS/NZS 2642.3:2008 Polybutylene pipe systems - Mechanical jointing fittings for use with polybutylene (PB) pipes for hot and cold water applications
-
AS/NZS 2712:2007
HB 18.28-2005 is cited by AS/NZS 2712:2007 Solar and heat pump water heaters - Design and construction
-
AS/NZS 3518:2013
HB 18.28-2005 is cited by AS/NZS 3518:2013 Acrylonitrile butadiene styrene (ABS) compounds; pipes and fittings for pressure applications
-
AS/NZS 3879:2011
HB 18.28-2005 is cited by AS/NZS 3879:2011 Solvent cements and priming fluids for PVC (PVC-U and PVC-M) and ABS and ASA pipes and fittings
-
AS/NZS 4129:2008
HB 18.28-2005 is cited by AS/NZS 4129:2008 Fittings for polyethylene (PE) pipes for pressure applications
-
AS/NZS 4130:2009
HB 18.28-2005 is cited by AS/NZS 4130:2009 Polyethylene (PE) pipes for pressure applications
-
AS/NZS 4765:2007
HB 18.28-2005 is cited by AS/NZS 4765:2007 Modified polyvinyl chloride (PVC-M) pipes for pressure applications
-
AS/NZS 5065:2005
HB 18.28-2005 is cited by AS/NZS 5065:2005 (R2016) Polyethylene and polypropylene pipes and fittings for drainage and sewerage applications