AS/NZS 3500.1:2018 Plumbing and drainage Part 1: Water services

Resource detail (https://codehub.building.govt.nz/resources/3500-12018-asnzs#resource-detail)

Citations (https://codehub.building.govt.nz/resources/3500-12018-asnzs#resource-citations)

AS/NZS 3500.1:2018 Plumbing and drainage Part 1: Water services

Abbreviation: AS/NZS 3500.1:2018
Amendment: A1 - incorporated
Valid from: 29/06/2018
Replaces: AS/NZS 3500.1:2015 (https://codehub.building.govt.nz/resources/asnzs-3500-12015),

Information provider: Standards New Zealand,
Author: Standards New Zealand, Standards Australia
Information type: New Zealand Standard,
Format: PDF, HARD COPY,

Cited By: This resource is cited by 7 documents (show Citations)
Cites: This resource cites 86 documents (show Citations)

Description

This Standard specifies requirements for the design, installation and commissioning of cold water services from a point of connection to the points of discharge, and non-drinking water from a point of connection to the points of discharge. It applies to new installations as well as alterations, additions and repairs to existing installations.

Previous versions:

AS/NZS 3500.1:2015 (https://codehub.building.govt.nz/resources/asnzs-3500-12015)
AS/NZS 3500.1:2003 (https://codehub.building.govt.nz/resources/asnzs-3500-12003)

For assistance with locating previous versions, please contact the information provider.

View on Information Provider website

AS/NZS 3500.1:2015 Amendment A1 - 05-09-2017 - incorporated (https://codehub.building.govt.nz/resources/asnzs-3500-12015)
AS/NZS 3500.1:2003 Amendment AS/NZS 3500.1:2003 A1 . - incorporated. Published 28/11/2005 (https://codehub.building.govt.nz/resources/asnzs-3500-12003)

For assistance with locating previous versions, please contact the information provider.

This resource is cited by:

AS/NZS 3500.1:2018 Plumbing and drainage Part 1: Water services

This document is CITED BY:

G12/AS1 (Amd 12) (Third Edition, Amendment 12) (https://codehub.building.govt.nz/resources/g12as1-amd-12)

AS/NZS 3500.1:2018 is cited by Acceptable Solution G12/AS1: Water Supplies from 27/06/2019
G12/VM1 (Amd 12) (Third Edition, Amendment 12) (https://codehub.building.govt.nz/resources/g12vm1-amd-12)

AS/NZS 3500.1:2018 is cited by Verification Method G12/VM1: Water Supplies from 27/06/2019
AS/NZS 2845.3:2020 (https://codehub.building.govt.nz/resources/asnzs-2845-32020)

AS/NZS 3500.1:2018 is cited by AS/NZS 2845.3:2020 Water supply - Backflow prevention devices - Part 3: Field testing and maintenance of testable devices
AS/NZS 3500.2:2018 (https://codehub.building.govt.nz/resources/3500-22018-asnzs)

AS/NZS 3500.1:2018 is cited by AS/NZS 3500.2:2018 Plumbing and drainage Part 2: Sanitary plumbing and drainage
AS/NZS 3500.3:2018 (https://codehub.building.govt.nz/resources/3500-32018-asnzs)

AS/NZS 3500.1:2018 is cited by AS/NZS 3500.3:2018 Plumbing and drainage Part 3: Stormwater drainage
AS/NZS 3500.4:2018 (https://codehub.building.govt.nz/resources/3500-42018-asnzs)

AS/NZS 3500.1:2018 is cited by AS/NZS 3500.4:2018 Plumbing and drainage Part 4: Heated water services
NZ Backflow Testing Standard 2019 (https://codehub.building.govt.nz/resources/nz-backflow-testing-standard-2019)

AS/NZS 3500.1:2018 is cited by NZ Backflow Testing Standard 2019 - Field testing of backflow prevention devices and verification of air gaps Standard

AS/NZS 3500.1:2018 Plumbing and drainage Part 1: Water services

Description

View on Information Provider website

AS/NZS 3500.1:2018 Plumbing and drainage Part 1: Water services (https://codehub.building.govt.nz/resources/3500-12018-asnzs#resource-detail)

Description

View on Information Provider website

This resource cites:

AS/NZS 3500.1:2018 Plumbing and drainage Part 1: Water services

This document CITES:

AS/NZS 1167.1:2005 (https://codehub.building.govt.nz/resources/asnzs-1167-12005)

AS/NZS 3500.1:2018 cites AS/NZS 1167.1:2005 Welding and brazing - Filler metals - Filler metal for brazing and braze welding

AS/NZS 1167.2:1999 (https://codehub.building.govt.nz/resources/asnzs-1167-21999)

AS/NZS 3500.1:2018 cites AS/NZS 1167.2:1999 Welding and brazing - Filler metals - Filler metal for welding

AS/NZS 1477:2017 (https://codehub.building.govt.nz/resources/14772017-asnzs)

AS/NZS 3500.1:2018 cites AS/NZS 1477:2017 PVC pipes and fittings for pressure applications

AS/NZS 2032:2006 (https://codehub.building.govt.nz/resources/20322006asnzs)

AS/NZS 3500.1:2018 cites AS/NZS 2032:2006 Installation of PVC pipe systems

AS/NZS 2280:2014 (https://codehub.building.govt.nz/resources/22802014asnzs)

AS/NZS 3500.1:2018 cites AS/NZS 2280:2014 Ductile iron pipes and fittings

AS/NZS 2492:2007 (https://codehub.building.govt.nz/resources/24922007asnzs)

AS/NZS 3500.1:2018 cites AS/NZS 2492:2007 Cross-linked polyethylene (PE-X) pipes for pressure applications

AS/NZS 2537.1:2011 (https://codehub.building.govt.nz/resources/2537-12011asnzs)

AS/NZS 3500.1:2018 cites AS/NZS 2537.1:2011 Mechanical jointing fittings for use with crosslinked polyethylene (PE-X) for pressure applications - Part 1: Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - General...

AS/NZS 2537.2:2011 (https://codehub.building.govt.nz/resources/2537-22011asnzs)

AS/NZS 3500.1:2018 cites AS/NZS 2537.2:2011 Mechanical jointing fittings for use with crosslinked polyethylene (PE-X) for pressure applications - Part 2: Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Fittings

AS/NZS 2537.3:2011 (https://codehub.building.govt.nz/resources/2537-32011asnzs)

AS/NZS 3500.1:2018 cites AS/NZS 2537.3:2011 Mechanical jointing fittings for use with crosslinked polyethylene (PE-X) for pressure applications - Part 3: Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Fitness for purpose...

AS/NZS 2537.4:2011 (https://codehub.building.govt.nz/resources/2537-42011asnzs)

AS/NZS 3500.1:2018 cites AS/NZS 2537.4:2011 Mechanical jointing fittings for use with crosslinked polyethylene (PE-X) for pressure applications -Part 4: Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Guidance for the assessment...

AS/NZS 2537.5:2011 (https://codehub.building.govt.nz/resources/2537-52011asnzs)

AS/NZS 3500.1:2018 cites AS/NZS 2537.5:2011 Mechanical jointing fittings for use with crosslinked polyethylene (PE-X) for pressure applications - Part 5: Plastics pipes and fittings - Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels - Metric...

AS/NZS 2544:1995 (https://codehub.building.govt.nz/resources/25441995asnzs)

AS/NZS 3500.1:2018 cites AS/NZS 2544:1995 Grey iron pressure fittings

AS/NZS 2642.2:2008 (https://codehub.building.govt.nz/resources/2642-22008asnzs)

AS/NZS 3500.1:2018 cites AS/NZS 2642.2:2008 Polybutylene pipe systems - Polybutylene (PB) pipe for hot and cold water applications

AS/NZS 2642.3:2008 (https://codehub.building.govt.nz/resources/2642-32008asnzs)

AS/NZS 3500.1:2018 cites AS/NZS 2642.3:2008 Polybutylene pipe systems - Mechanical jointing fittings for use with polybutylene (PB) pipes for hot and cold water applications

AS/NZS 2648.1:1995 (https://codehub.building.govt.nz/resources/2648-11995asnzs)

AS/NZS 3500.1:2018 cites AS/NZS 2648.1:1995 Underground marking tape - Non-detectable tape

AS/NZS 2845.1:2010 (https://codehub.building.govt.nz/resources/2845-12010asnzs)

AS/NZS 3500.1:2018 cites AS/NZS 2845.1:2010 Water supply - Backflow prevention devices - Part 1: Materials, design and performance requirements

AS/NZS 2878:2000 (Reconfirmed in 2017) (https://codehub.building.govt.nz/resources/28782000asnzs)

AS/NZS 3500.1:2018 cites AS/NZS 2878:2000 (R2017) Timber - Classification into strength groups

AS/NZS 3500.0:2003 (https://codehub.building.govt.nz/resources/3500-02003asnzs)

AS/NZS 3500.1:2018 cites AS/NZS 3500.0:2003 Plumbing and drainage - Glossary of terms

AS/NZS 3500.4:2018 (https://codehub.building.govt.nz/resources/3500-42018-asnzs)

AS/NZS 3500.1:2018 cites AS/NZS 3500.4:2018 Plumbing and drainage Part 4: Heated water services

AS/NZS 3518:2013 (https://codehub.building.govt.nz/resources/35182013asnzs)

AS/NZS 3500.1:2018 cites AS/NZS 3518:2013 Acrylonitrile butadiene styrene (ABS) compounds; pipes and fittings for pressure applications

AS/NZS 3879:2011 (https://codehub.building.govt.nz/resources/38792011asnzs)

AS/NZS 3500.1:2018 cites AS/NZS 3879:2011 Solvent cements and priming fluids for PVC (PVC-U and PVC-M) and ABS and ASA pipes and fittings

AS/NZS 4020:2018 (https://codehub.building.govt.nz/resources/40202018-asnzs)

AS/NZS 3500.1:2018 cites AS/NZS 4020:2018 Testing of products for use in contact with drinking water

AS/NZS 4087:2011 (https://codehub.building.govt.nz/resources/40872011asnzs)

AS/NZS 3500.1:2018 cites AS/NZS 4087:2011 Metallic flanges for waterworks purposes

AS/NZS 4129:2008 (https://codehub.building.govt.nz/resources/41292008asnzs)

AS/NZS 3500.1:2018 cites AS/NZS 4129:2008 Fittings for polyethylene (PE) pipes for pressure applications

AS/NZS 4130:2018 (https://codehub.building.govt.nz/resources/41302018-asnzs)

AS/NZS 3500.1:2018 cites AS/NZS 4130:2018 Polyethylene (PE) pipes for pressure applications

AS/NZS 4331.1:1995 (https://codehub.building.govt.nz/resources/asnzs-4331-11995)

AS/NZS 3500.1:2018 cites AS/NZS 4331.1:1995 (R2016) Metallic flanges - Steel flanges

AS/NZS 4331.2:1995 (https://codehub.building.govt.nz/resources/asnzs-4331-21995)

AS/NZS 3500.1:2018 cites AS/NZS 4331.2:1995 (R2016) Metallic flanges - Cast iron flanges

AS/NZS 4331.3:1995 (https://codehub.building.govt.nz/resources/asnzs-4331-31995)

AS/NZS 3500.1:2018 cites AS/NZS 4331.3:1995 (R2016) Metallic flanges - Copper alloy and composite flanges

AS/NZS 4441:2017 (https://codehub.building.govt.nz/resources/44412017-asnzs)

AS/NZS 3500.1:2018 cites AS/NZS 4441:2017 Oriented PVC (PVC-O) pipes for pressure applications

AS/NZS 4671:2001 (https://codehub.building.govt.nz/resources/46712001asnzs)

AS/NZS 3500.1:2018 cites AS/NZS 4671:2001 Steel reinforcing materials

AS/NZS 4680:2006 (https://codehub.building.govt.nz/resources/46802006asnzs)

AS/NZS 3500.1:2018 cites AS/NZS 4680:2006 (R2017) Hot-dip galvanised (zinc) coatings on fabricated ferrous articles

AS/NZS 4765:2017 (https://codehub.building.govt.nz/resources/47652017-asnzs)

AS/NZS 3500.1:2018 cites AS/NZS 4765:2017 Modified PVC (PVC-M) pipes for pressure applications

AS/NZS 4792:2006 (https://codehub.building.govt.nz/resources/asnzs-47922006)

AS/NZS 3500.1:2018 cites AS/NZS 4792:2006 (R2017) Hot-dip galvanized (zinc) coatings on ferrous hollow sections, applied by a continuous or a specialized process

NZS 3109:1997 (https://codehub.building.govt.nz/resources/31091997nzs)

AS/NZS 3500.1:2018 cites NZS 3109:1997 Concrete construction - SPONSORED

NZS 3124:1987 (https://codehub.building.govt.nz/resources/31241987nzs)

AS/NZS 3500.1:2018 cites NZS 3124:1987 Specification for concrete construction for minor works

NZS 3501:1976 (https://codehub.building.govt.nz/resources/35011976nzs)

AS/NZS 3500.1:2018 cites NZS 3501:1976 Specification for copper tubes for water, gas, and sanitation - SPONSORED

NZS 3640:2003 (https://codehub.building.govt.nz/resources/36402003nzs)

AS/NZS 3500.1:2018 cites NZS 3640:2003 Chemical preservation of round and sawn timber - SPONSORED

NZS 4121:2001 (https://codehub.building.govt.nz/resources/41212001nzs)

AS/NZS 3500.1:2018 cites NZS 4121:2001 Design for access and mobility - Buildings and associated facilities - SPONSORED

NZS 5807:1980 (https://codehub.building.govt.nz/resources/nzs-58071980)

AS/NZS 3500.1:2018 cites NZS 5807:1980 Code of practice for industrial identification by colour, wording or other coding - SPONSORED

NZS 7702:1989 (https://codehub.building.govt.nz/resources/nzs-77021989)

AS/NZS 3500.1:2018 cites NZS 7702:1989 Specification for colours for identification, coding and special purposes

AS 1074-1989 (https://codehub.building.govt.nz/resources/as-1074-1989)

AS/NZS 3500.1:2018 cites AS 1074-1989 (R2018) Steel tubes and tubulars for ordinary service

AS 1172.1:2014 (https://codehub.building.govt.nz/resources/as-1172-12014)

AS/NZS 3500.1:2018 cites AS 1172.1:2014 Water closets (WCs) - Part 1: Pans

AS 1172.2:2014 (https://codehub.building.govt.nz/resources/as-1172-22014)

AS/NZS 3500.1:2018 cites AS 1172.2:2014 Water closets (WCs) Flushing devices and cistern inlet and outlet valves

AS 1319:1994 (https://codehub.building.govt.nz/resources/as-13191994)

AS/NZS 3500.1:2018 cites AS 1319:1994 (R2018) Safety signs for the occupational environment

AS 1345-1995 (https://codehub.building.govt.nz/resources/as-1345-1995)

AS/NZS 3500.1:2018 cites AS 1345-1995 (R2018) Identification of the contents of pipes, conduits and ducts

AS 1379-2007 (https://codehub.building.govt.nz/resources/as-1379-2007)

AS/NZS 3500.1:2018 cites AS 1379-2007 (R2017) Specification and supply of concrete

AS 1397-2011 (https://codehub.building.govt.nz/resources/as-1397-2011)

AS/NZS 3500.1:2018 cites AS 1397-2011 Continuous hot-dip metallic coated steel sheet and strip - Coatings of zinc and zinc alloyed with aluminium and magnesium

AS 1432-2004 (R2016) (https://codehub.building.govt.nz/resources/as-1432-2004-r2016)

AS/NZS 3500.1:2018 cites AS 1432-2004 (R2016) Copper tubes for plumbing, gasfitting and drainage applications

AS 1478.1-2000 (Reconfirmed in 2018) (https://codehub.building.govt.nz/resources/as-1478-1-2000)

AS/NZS 3500.1:2018 cites AS 1478.1-2000 (R2018) Chemical admixtures for concrete, mortar and grout - Admixtures for concrete

AS 1604.1-2012 (https://codehub.building.govt.nz/resources/as-1604-1-2012)

AS/NZS 3500.1:2018 cites AS 1604.1-2012 Specification for preservative treatment - Part 1: Sawn and round timber

AS 1646-2007 (https://codehub.building.govt.nz/resources/as-1646-2007)

AS/NZS 3500.1:2018 cites AS 1646-2007 (R2018) Elastomeric seals for waterworks purposes

AS 1657-2013 (https://codehub.building.govt.nz/resources/as-1657-2013)

AS/NZS 3500.1:2018 cites AS 1657-2013 Fixed platforms, walkways, stairways and ladders - Design, construction and installation

AS 2129-2000 (https://codehub.building.govt.nz/resources/as-2129-2000)

AS/NZS 3500.1:2018 cites AS 2129-2000 (R2016) Flanges for pipes valves and fittings

AS 2419.1:2017 (2017-11-06) (https://codehub.building.govt.nz/resources/as-2419-12017)

AS/NZS 3500.1:2018 cites AS 2419.1:2017 Fire Hydrant Installations. Part 1: System design, installation and commissioning

AS 2700-2011 (https://codehub.building.govt.nz/resources/as-2700-2011)

AS/NZS 3500.1:2018 cites AS 2700-2011 Colour standards for general purposes

AS 2845.2-2010 (https://codehub.building.govt.nz/resources/as-2845-2-2010)

AS/NZS 3500.1:2018 cites AS 2845.2-2010 Water supply - Backflow preventions devices Registered air gaps and registered break tanks

AS 2845.3-2010 (https://codehub.building.govt.nz/resources/as-2845-3-2010)

AS/NZS 3500.1:2018 cites AS 2845.3-2010 Water supply - Part 3: Field testing and maintenance of testable devices

AS 2865-2009 (https://codehub.building.govt.nz/resources/as-2865-2009)

AS/NZS 3500.1:2018 cites AS 2865-2009 Confined spaces

AS 3600-2018 (https://codehub.building.govt.nz/resources/as-3600-2018)

AS/NZS 3500.1:2018 cites AS 3600-2018 Concrete structures

AS 3688:2016 (https://codehub.building.govt.nz/resources/as-36882016)

AS/NZS 3500.1:2018 cites AS 3688:2016 Water supply and gas systems - Metallic fittings and end connectors

AS 3795-1996 (https://codehub.building.govt.nz/resources/as-3795-1996)

AS/NZS 3500.1:2018 cites AS 3795-1996 Copper alloy tubes for plumbing and drainage applications

AS 4176.1-2010 (https://codehub.building.govt.nz/resources/as-4176-1-2010)

AS/NZS 3500.1:2018 cites AS 4176.1-2010 Multilayer pipes for pressure applications - Part 1: Multilayer piping systems for hot and cold water plumbing applications - General (ISO 21003-1:2008, MOD)

AS 4176.2-2010 (https://codehub.building.govt.nz/resources/as-4176-2-2010)

AS/NZS 3500.1:2018 cites AS 4176.2-2010 Multilayer pipes for pressure applications - Part 2: Multilayer piping systems for hot and cold water plumbing applications - Pipes (ISO 21003-2:2008, MOD)

AS 4176.3-2010 (https://codehub.building.govt.nz/resources/as-4176-3-2010)

AS/NZS 3500.1:2018 cites AS 4176.3-2010 Multilayer pipes for pressure applications - Part 3: Multilayer piping systems for hot and cold water plumbing applications - Fittings (ISO 21003-3:2008, MOD)

AS 4176.5-2010 (https://codehub.building.govt.nz/resources/as-4176-5-2010)

AS/NZS 3500.1:2018 cites AS 4176.5-2010 Multilayer pipes for pressure applications - Part 5: Multilayer piping systems for hot and cold water plumbing applications - Fitness for purpose of the system (ISO 21003-5:2008, MOD)

AS 4176.7-2010 (https://codehub.building.govt.nz/resources/as-4176-7-2010)

AS/NZS 3500.1:2018 cites AS 4176.7-2010 Multilayer pipes for pressure applications - Part 7: Multilayer piping systems for hot and cold water plumbing applications - Assessment of conformity (ISO/TS 21003-7:2008, MOD)

AS 4176.8-2010 (https://codehub.building.govt.nz/resources/as-4176-8-2010)

AS/NZS 3500.1:2018 cites AS 4176.8-2010 Multilayer pipes for pressure applications - Part 8: Multilayer pipe systems for consumer gas installations with a maximum operating pressure up to and including 5 bar (500 kPa) - Specifications for systems (ISO 17484-1:2006, MOD)

AS 4728-2005 (R2016) (https://codehub.building.govt.nz/resources/as-4728-2005-r2016)

AS/NZS 3500.1:2018 cites AS 4728-2005 (R2016) Electric resistance welded steel pipe for pressure purposes

AS 4809:2017 (https://codehub.building.govt.nz/resources/as-48092017)

AS/NZS 3500.1:2018 cites AS 4809:2017 Copper pipe and fittings - Installation and commissioning

AS 5082.1-2007 (R2017) (https://codehub.building.govt.nz/resources/as-5082-1-2007-r2017)

AS/NZS 3500.1:2018 cites AS 5082.1-2007 (R2017) Polybutylene (PB) plumbing pipe systems - Metric series Metric polybutylene (PB) pipes for hot and cold water applications

AS 5082.2-2007 (R2017) (https://codehub.building.govt.nz/resources/as-5082-2-2007-r2017)

AS/NZS 3500.1:2018 cites AS 5082.2-2007 (R2017) Polybutylene (PB) plumbing pipe systems - Metric series Mechanical and fusion jointing systems

AS 5200.053-2008 (https://codehub.building.govt.nz/resources/as-5200-053-2008)

AS/NZS 3500.1:2018 cites AS 5200.053-2008 Plumbing and drainage products - Part 053: Stainless steel pipes and tubes for pressure applications

ASME B36.19M:2004 (https://codehub.building.govt.nz/resources/asme-b36-19m2004)

AS/NZS 3500.1:2018 cites ASME B36.19M:2004 (R2015) Stainless Steel Pipe

ASTM D2846 / D2846M - 17be1 (https://codehub.building.govt.nz/resources/astm-d2846-d2846m-17be1)

AS/NZS 3500.1:2018 cites ASTM D2846 / D2846M - 17be1 Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Hot- and Cold-Water Distribution Systems

ASTM F493-14 (https://codehub.building.govt.nz/resources/astm-f493-14)

AS/NZS 3500.1:2018 cites ASTM F493-14 Standard Specification for Solvent Cements for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe and Fittings

AWWA C217-16 (2016) (https://codehub.building.govt.nz/resources/awwa-c217-16)

AS/NZS 3500.1:2018 cites AWWA C217-16 Microcrystalline Wax and Petrolatum Tape Coating Systems for Steel Water Pipe and Fittings

AWWA C651-14 (https://codehub.building.govt.nz/resources/awwa-c651-14)

AS/NZS 3500.1:2018 cites AWWA C651-14 Disinfecting Water Mains

BS 1387:1985 (https://codehub.building.govt.nz/resources/bs-13871985)

AS/NZS 3500.1:2018 cites BS 1387:1985 Specification for screwed and socketed steel tubes and tubulars and for plain end steel tubes suitable for welding or for screwing to BS 21 pipe threads

BS EN 10312:2002 (https://codehub.building.govt.nz/resources/bs-en-103122002)

AS/NZS 3500.1:2018 cites BS EN 10312:2002 Welded stainless steel tubes for the conveyance of aqueous liquids including water for human consumption. Technical delivery conditions

ISO 15874-1:2013 (https://codehub.building.govt.nz/resources/iso-15874-12013)

AS/NZS 3500.1:2018 cites ISO 15874-1:2013 (R2017) Preview Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 1: General

ISO 15874-2:2013 (https://codehub.building.govt.nz/resources/iso-15874-22013)

AS/NZS 3500.1:2018 cites ISO 15874-2:2013 (2017) Preview Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 2: Pipes

ISO 15874-3:2013 (https://codehub.building.govt.nz/resources/iso-15874-32013)

AS/NZS 3500.1:2018 cites ISO 15874-3:2013 (R2017) Preview Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 3: Fittings

ISO 15874-5:2013 (https://codehub.building.govt.nz/resources/iso-15874-52013)

AS/NZS 3500.1:2018 cites ISO 15874-5:2013 (R2017) Preview Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 5: Fitness for purpose of the system

NCC 2016 - Complete Series (2016) (https://codehub.building.govt.nz/resources/ncc-2016)

AS/NZS 3500.1:2018 cites NCC 2016 - National Construction Code of Australia - Complete Series

NZBC G12 (https://codehub.building.govt.nz/resources/nzbc-g12)

AS/NZS 3500.1:2018 cites Building Code Clause G12 - Water Supplies

WSA 03-2011 (3.2) (https://codehub.building.govt.nz/resources/wsa-03-2011)

AS/NZS 3500.1:2018 cites WSA 03-2011 Water Supply Code of Australia

Feedback (https://codehub.building.govt.nz/feedback?backUrl=/resources/3500-12018-asnzs)