AS/NZS 1260:2017 PVC-U pipes and fittings for drain, waste and vent applications
- Abbreviation
- AS/NZS 1260:2017
- Valid from
- 9/05/2017
- Information provider
- Standards New Zealand,
- Author
- Standards New Zealand, Standards Australia
- Information type
- New Zealand Standard,
- Format
- PDF, HARD COPY,
Description
This Standard outlines minimum requirements for the manufacture and performance of PVC-U pipes and fittings for non-pressure drain, waste and vent (DWV) applications for use by manufacturers, specifiers and purchasers of such products.
This resource is cited by:
AS/NZS 1260:2017 PVC-U pipes and fittings for drain, waste and vent applications
This document is CITED BY:
-
E1/AS1 (Amd 11) (First Edition, Amendment 11.)
AS/NZS 1260:2017 is cited by Acceptable Solution E1/AS1: Surface Water from 5/11/2020
-
E1/AS1 (Amd 12) (First Edition, Amendment 12.)
AS/NZS 1260:2017 is cited by Acceptable Solution E1/AS1: Surface Water from 5/11/2020
-
G13/AS1 (Amd 9) (Second Edition, Amendment 9)
AS/NZS 1260:2017 is cited by Acceptable Solution G13/AS1: Sanitary Plumbing from 5/11/2020
-
G13/AS1 (Amd 10) (Second Edition, Amendment 10)
AS/NZS 1260:2017 is cited by Acceptable Solution G13/AS1: Sanitary Plumbing from 5/11/2020
-
G13/AS2 (Amd 9) (Second Edition, Amendment 9)
AS/NZS 1260:2017 is cited by Acceptable Solution G13/AS2: Drainage from 5/11/2020
-
G13/AS2 (Amd 10) (Second Edition, Amendment 10)
AS/NZS 1260:2017 is cited by Acceptable Solution G13/AS2: Drainage from 5/11/2020
-
AS 4809:2017
AS/NZS 1260:2017 is cited by AS 4809:2017 Copper pipe and fittings - Installation and commissioning
-
AS/NZS 3500.2:2018
AS/NZS 1260:2017 is cited by AS/NZS 3500.2:2018 Plumbing and drainage Part 2: Sanitary plumbing and drainage
-
AS/NZS 3500.3:2018
AS/NZS 1260:2017 is cited by AS/NZS 3500.3:2018 Plumbing and drainage Part 3: Stormwater drainage
-
AS/NZS 3500.3:2021
AS/NZS 1260:2017 is cited by AS/NZS 3500.3:2021 Plumbing and drainage, Part 3: Stormwater drainage
-
AS/NZS 3500.4:2018
AS/NZS 1260:2017 is cited by AS/NZS 3500.4:2018 Plumbing and drainage Part 4: Heated water services
This resource cites:
AS/NZS 1260:2017 PVC-U pipes and fittings for drain, waste and vent applications
This document CITES:
AS/NZS 1260:2017 cites AS/NZS 1462.11:1996 (R2017) Methods of test for plastics pipes and fittings - Method 11: Method for high temperature stress-relief testing of fittings
AS/NZS 1260:2017 cites AS/NZS 1462.13:2006 (R2017) Methods of test for plastics pipes and fittings - Method 13: Method for the determination of elastomeric seal joint contact width and pressure
AS/NZS 1260:2017 cites AS/NZS 1462.15:1996 (R2017) Methods of test for plastics pipes and fittings - Method 15: Method for determination of vinyl chloride monomer content
AS/NZS 1260:2017 cites AS/NZS 1462.16:2006 (R2017) Methods of test for plastics pipes and fittings - Method 16: Method for high temperature testing of pipe
AS/NZS 1260:2017 cites AS/NZS 1462.1:2006 Methods of test for plastics pipes and fittings - Method 1: Method for determining the dimensions of pipes and fittings
AS/NZS 1260:2017 cites AS/NZS 1462.21:1997 (R2017) Methods of test for plastics pipes and fittings - Method 21: Method for determination of bond strength
AS/NZS 1260:2017 cites AS/NZS 1462.22:1997 Methods of test for plastics pipes and fittings - Method 22: Method for determination of pipe stiffness
AS/NZS 1260:2017 cites AS/NZS 1462.23:2006 Methods of test for plastics pipes and fittings - Method 23: Method for determination of ring flexibility
AS/NZS 1260:2017 cites AS/NZS 1462.2:2006 (R2017) Methods of test for plastics pipes and fittings - Method 2: Method for determining the flattening properties of plastics pipes and fittings
AS/NZS 1260:2017 cites AS/NZS 1462.3:1998 (R2017) Methods of test for plastics pipes and fittings - Method 3: Method for determining the impact characteristics of pipes
AS/NZS 1260:2017 cites AS/NZS 1462.4:2002 (R2017) Methods of test for plastics pipes and fittings - Method 4: Method of determining reversion of UPVC pipes
AS/NZS 1260:2017 cites AS/NZS 1462.5:2002 (R2017) Methods of test for plastics pipes and fittings - Method 5: Vicat softening temperature
AS/NZS 1260:2017 cites AS/NZS 1462.8:2008 (R2017) Methods of test for plastics pipes and fittings - Method 8: Method of testing the leaktightness of assemblies
AS/NZS 1260:2017 cites AS/NZS 1477:2017 PVC pipes and fittings for pressure applications
AS/NZS 1260:2017 cites AS/NZS 2032:2006 Installation of PVC pipe systems
AS/NZS 1260:2017 cites AS/NZS 3879:2011 Solvent cements and priming fluids for PVC (PVC-U and PVC-M) and ABS and ASA pipes and fittings
AS/NZS 1260:2017 cites AS/NZS 4765:2017 Modified PVC (PVC-M) pipes for pressure applications
AS/NZS 1260:2017 cites AS 1172.1:2014 Water closets (WCs) - Part 1: Pans
AS/NZS 1260:2017 cites AS 1646-2007 (R2018) Elastomeric seals for waterworks purposes
AS/NZS 1260:2017 cites AS 2700-2011 Colour standards for general purposes
AS/NZS 1260:2017 cites AS 2887-1993 (R2017) Plastic waste fittings
AS/NZS 1260:2017 cites AS 681.1-2008 Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Part 1: Vulcanized rubber
AS/NZS 1260:2017 cites AS 681.2-2008 Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Part 2: Thermoplastic elastomers
AS/NZS 1260:2017 cites BS EN 1055:1996 Plastics piping systems. Thermoplastics piping systems for soil and waste discharge inside buildings. Test method for resistance to elevated temperature cycling
AS/NZS 1260:2017 cites ISO 13967:2009 Thermoplastics fittings - Determination of ring stiffness