AS/NZS 1254:2010 PVC-U pipes and fittings for stormwater and surface water applications
- Abbreviation
- AS/NZS 1254:2010
- Amendment
- A1, A2 and A3 - incorporated
- Valid from
- 5/04/2010
- Information provider
- Standards New Zealand,
- Author
- Standards New Zealand, Standards Australia
- Information type
- New Zealand Standard,
- Format
- PDF, HARD COPY,
Description
This Standard outlines minimum requirements for the manufacture and performance of PVC-U pipes and fittings for stormwater applications for use by manufacturers, specifiers and purchasers of such products.
Scope
This Standard specifies requirements for PVC-U pipes and fittings for conveyance of stormwater or surface water. The Standard includes requirements for both plain and structured wall pipes and fittings. Alternative methods for determining compliance with this Standard are given in Appendix A. Appendix B sets out additional requirements for pipes and fittings classed as best environmental practice PVC for stormwater and surface water applications.
This resource is cited by:
AS/NZS 1254:2010 PVC-U pipes and fittings for stormwater and surface water applications
This document is CITED BY:
-
E1/AS1 (Amd 10) (First Edition, Amendment 10)
AS/NZS 1254:2010 is cited by Acceptable Solution E1/AS1: Surface Water from 14/02/2014
-
E1/AS1 (Amd 9) (First Edition, Amendment 9)
AS/NZS 1254:2010 is cited by Acceptable Solution E1/AS1: Surface Water from 14/02/2014
-
E1/AS1 (Amd 11) (First Edition, Amendment 11.)
AS/NZS 1254:2010 is cited by Acceptable Solution E1/AS1: Surface Water from 14/02/2014
-
E1/AS1 (Amd 12) (First Edition, Amendment 12.)
AS/NZS 1254:2010 is cited by Acceptable Solution E1/AS1: Surface Water from 14/02/2014
-
AS/NZS 3500.3:2018
AS/NZS 1254:2010 is cited by AS/NZS 3500.3:2018 Plumbing and drainage Part 3: Stormwater drainage
-
AS/NZS 3500.3:2021
AS/NZS 1254:2010 is cited by AS/NZS 3500.3:2021 Plumbing and drainage, Part 3: Stormwater drainage
-
AS/NZS 3879:2011
AS/NZS 1254:2010 is cited by AS/NZS 3879:2011 Solvent cements and priming fluids for PVC (PVC-U and PVC-M) and ABS and ASA pipes and fittings
This resource cites:
AS/NZS 1254:2010 PVC-U pipes and fittings for stormwater and surface water applications
This document CITES:
AS/NZS 1254:2010 cites AS/NZS 1260:2009 PVC-U Pipes and fittings for drain, waste and vent applications
AS/NZS 1254:2010 cites AS/NZS 1462.11:1996 (R2017) Methods of test for plastics pipes and fittings - Method 11: Method for high temperature stress-relief testing of fittings
AS/NZS 1254:2010 cites AS/NZS 1462.15:1996 (R2017) Methods of test for plastics pipes and fittings - Method 15: Method for determination of vinyl chloride monomer content
AS/NZS 1254:2010 cites AS/NZS 1462.1:2006 Methods of test for plastics pipes and fittings - Method 1: Method for determining the dimensions of pipes and fittings
AS/NZS 1254:2010 cites AS/NZS 1462.21:1997 (R2017) Methods of test for plastics pipes and fittings - Method 21: Method for determination of bond strength
AS/NZS 1254:2010 cites AS/NZS 1462.22:1997 Methods of test for plastics pipes and fittings - Method 22: Method for determination of pipe stiffness
AS/NZS 1254:2010 cites AS/NZS 1462.23:2006 Methods of test for plastics pipes and fittings - Method 23: Method for determination of ring flexibility
AS/NZS 1254:2010 cites AS/NZS 1462.3:1998 (R2017) Methods of test for plastics pipes and fittings - Method 3: Method for determining the impact characteristics of pipes
AS/NZS 1254:2010 cites AS/NZS 1462.8:2008 (R2017) Methods of test for plastics pipes and fittings - Method 8: Method of testing the leaktightness of assemblies
AS/NZS 1254:2010 cites AS/NZS 1477:2006 PVC pipes and fittings for pressure applications
AS/NZS 1254:2010 cites AS/NZS 2032:2006 Installation of PVC pipe systems
AS/NZS 1254:2010 cites AS/NZS 3500.0:2003 Plumbing and drainage - Glossary of terms
AS/NZS 1254:2010 cites AS/NZS 3879:2006 Solvent cements and priming fluids for PVC (PVC-U and PVC-M) and ABS pipes and fittings
AS/NZS 1254:2010 cites AS/NZS 4765:2007 Modified polyvinyl chloride (PVC-M) pipes for pressure applications
AS/NZS 1254:2010 cites AS 1646-2007 (R2018) Elastomeric seals for waterworks purposes
AS/NZS 1254:2010 cites AS 681.1-2008 Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Part 1: Vulcanized rubber
AS/NZS 1254:2010 cites AS 681.2-2008 Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Part 2: Thermoplastic elastomers
AS/NZS 1254:2010 cites ISO 13967:2009 Thermoplastics fittings - Determination of ring stiffness
AS/NZS 1254:2010 cites ISO/IEC 17050-1:2004 Conformity assessment - Supplier's declaration of conformity - Part 1: General requirements
AS/NZS 1254:2010 cites ISO/IEC 17050-2:2004 Preview Conformity assessment -- Supplier's declaration of conformity -- Part 2: Supporting documentation