NZS 4223.1:2008 Code of practice for glazing in buildings - Glass selection and glazing - SPONSORED

Abbreviation: NZS 4223.1:2008
Amendment: Amendment 1 - incorporated. Published 29/02/2016.
Valid from: 28/05/2008
Replaces: NZS 4223 Parts 1&2:1985,

Information provider: Standards New Zealand,
Author: Standards New Zealand
Information type: New Zealand Standard,
Format: PDF, HARD COPY,

Cited By: This resource is cited by 17 documents (show Citations)
Cites: This resource cites 31 documents (show Citations)

Description

NZS 4223.1 provides design criteria, guidance for specific design and procedures for glass selection, and glazing in buildings.

Scope

The following are excluded from the scope of NZS 4223 Parts 1, 2, 3, and 4:

(a) Glazing in lift cars and liftwells (see Appendix A for guidance);
(b) Furniture glass, cabinet glass, vanities, glass basins, refrigeration units, internal glass fitments and glass wall linings, framed internal wall mirrors, and mirrors not specifically covered by these parts;
(c) Buildings and structures with no public access intended for non-habitable building structures for horticultural or agricultural use;
(d) Restoration or repairs to existing decorated glass;
(e) Glazing applications that might fail due to stresses other than tensile stresses, such as glass floors;
(f) Plastic glazing materials;
(g) The construction and installation of windows (refer to NZS 3504, NZS 3619, and NZS 4232.2);
(h) Glass blocks, pavers, slumped, formed, or cast glass;
(i) Point-fixed or point-supported systems, used for glazing, cladding, signage, and the like, not specifically covered by these parts.

For assistance with locating previous versions, please contact the information provider.

Notes/comments

The Building System Performance branch of MBIE has sponsored access to view and print a single downloadable PDF copy of this standard at no charge.

View on Information Provider website

For assistance with locating previous versions, please contact the information provider.

The Building System Performance branch of MBIE has sponsored access to view and print a single downloadable PDF copy of this standard at no charge.

This resource is cited by:

NZS 4223.1:2008 Code of practice for glazing in buildings - Glass selection and glazing - SPONSORED

This document is CITED BY:

B1/AS1 (Amd 11) (First edition, Amendment 11)

NZS 4223.1:2008 is cited by Acceptable Solution B1/AS1: General from 30/09/2010
B1/AS1 (Amd 21) (First Edition, Amendment 21)

NZS 4223.1:2008 is cited by Acceptable Solution B1/AS1: General from 30/09/2010
B1/AS1 (Amd 20) (First edition, Amendment 20)

NZS 4223.1:2008 is cited by Acceptable Solution B1/AS1: General from 30/09/2010
B1/AS1 (Amd 15) (First Edition, Amendment 15)

NZS 4223.1:2008 is cited by Acceptable Solution B1/AS1: General from 30/09/2010
B1/AS1 (Amd 19) (First edition, Amendment 19)

NZS 4223.1:2008 is cited by Acceptable Solution B1/AS1: General from 30/09/2010
B1/AS1 (Amd 18) (First Edition, Amendment 18)

NZS 4223.1:2008 is cited by Acceptable Solution B1/AS1: General from 30/09/2010
B1/AS1 (Amd 17) (First Edition, Amendment 17)

NZS 4223.1:2008 is cited by Acceptable Solution B1/AS1: General from 30/09/2010
B1/AS1 (Amd 16) (First edition, Amendment 16)

NZS 4223.1:2008 is cited by Acceptable Solution B1/AS1: General from 30/09/2010
B1/AS1 (Amd 10) (First edition, Amendment 10)

NZS 4223.1:2008 is cited by Acceptable Solution B1/AS1: General from 30/09/2010
B1/AS1 (Amd 12) (First edition, Amendment 12)

NZS 4223.1:2008 is cited by Acceptable Solution B1/AS1: General from 30/09/2010
B1/AS1 (Amd 13) (First edition, Amendment 13)

NZS 4223.1:2008 is cited by Acceptable Solution B1/AS1: General from 30/09/2010
B1/AS1 (Amd 14) (First edition, Amendment 14)

NZS 4223.1:2008 is cited by Acceptable Solution B1/AS1: General from 30/09/2010
NZS 4211:2008

NZS 4223.1:2008 is cited by NZS 4211:2008 Specification for performance of windows - SPONSORED
NZS 4223.2:2016

NZS 4223.1:2008 is cited by NZS 4223.2:2016 Glazing in buildings Part 2: Insulating glass units - SPONSORED
NZS 4223.3:2016

NZS 4223.1:2008 is cited by NZS 4223.3:2016 Glazing in buildings - Human impact safety requirements - SPONSORED
NZS 4223.4:2008

NZS 4223.1:2008 is cited by NZS 4223.4:2008 Code of practice for glazing in buildings - Wind, dead, snow, and live actions - SPONSORED
SH/AS1 (First edition, unamended)

NZS 4223.1:2008 is cited by Simple House - Acceptable Solution Revoked

NZS 4223.1:2008 Code of practice for glazing in buildings - Glass selection and glazing - SPONSORED

Description

NZS 4223.1 provides design criteria, guidance for specific design and procedures for glass selection, and glazing in buildings.

View on Information Provider website

NZS 4223.1:2008 Code of practice for glazing in buildings - Glass selection and glazing - SPONSORED

Description

NZS 4223.1 provides design criteria, guidance for specific design and procedures for glass selection, and glazing in buildings.

View on Information Provider website

This resource cites:

NZS 4223.1:2008 Code of practice for glazing in buildings - Glass selection and glazing - SPONSORED

This document CITES:

AS/NZS 1170.0:2002

NZS 4223.1:2008 cites AS/NZS 1170.0:2002 Structural Design Actions - General principles

AS/NZS 1170.1:2002

NZS 4223.1:2008 cites AS/NZS 1170.1:2002 (R2016) Structural Design Actions - Permanent, imposed and other actions

AS/NZS 1170.2:2002

NZS 4223.1:2008 cites AS/NZS 1170.2:2002 Structural Design Actions - Wind Actions

AS/NZS 1170.3:2003 (Reconfirmed in 2016)

NZS 4223.1:2008 cites AS/NZS 1170.3:2003 (R2016) Structural Design Actions - Snow and ice actions

AS/NZS 2208:1996

NZS 4223.1:2008 cites AS/NZS 2208:1996 Safety glazing materials in buildings

AS/NZS 4667:2000

NZS 4223.1:2008 cites AS/NZS 4667:2000 (R2016) Quality requirements for cut-to-size and processed glass

AS/NZS 4668:2000

NZS 4223.1:2008 cites AS/NZS 4668:2000 (R2016) Glossary of terms used in the glass and glazing industry

NZS 1170.5:2004 (Excl. A1)

NZS 4223.1:2008 cites NZS 1170.5:2004 (Excl. A1) Structural Design Actions - Part 5: Earthquake design actions - New Zealand - Sponsored.

NZS 3504:1979

NZS 4223.1:2008 cites NZS 3504:1979 Specification for aluminium windows

NZS 3619:1979

NZS 4223.1:2008 cites NZS 3619:1979 Specification for timber windows

NZS 4211:2008

NZS 4223.1:2008 cites NZS 4211:2008 Specification for performance of windows - SPONSORED

NZS 4223 Supplement 1:2008

NZS 4223.1:2008 cites NZS 4223 Supplement 1:2008 Code of practice for glazing in buildings - Supplement 1 to NZS 4223.1:2008 and NZS 4223.4:2008

NZS 4223.2:2016

NZS 4223.1:2008 cites NZS 4223.2:2016 Glazing in buildings Part 2: Insulating glass units - SPONSORED

NZS 4223.3:2016

NZS 4223.1:2008 cites NZS 4223.3:2016 Glazing in buildings - Human impact safety requirements - SPONSORED

NZS 4223.4:2008

NZS 4223.1:2008 cites NZS 4223.4:2008 Code of practice for glazing in buildings - Wind, dead, snow, and live actions - SPONSORED

NZS 4232.2:1988

NZS 4223.1:2008 cites NZS 4232.2:1988 Performance criteria for fire resisting enclosures - Fire resisting glazing systems - SPONSORED

AAMA 800-05 (incl. AAMA 810.1-2005)

NZS 4223.1:2008 cites AAMA 800-05 (including AAMA 810.1-2005) Voluntary Specifications and Test Methods for Sealants

ANSI Z97 Part 1:2004

NZS 4223.1:2008 cites ANSI Z97 Part 1:2004 Safety glazing materials used in buildings Safety performance - Specifications and methods of test

ASTM C1184 - 05

NZS 4223.1:2008 cites ASTM C1184 - 05 Standard specification for structural silicone sealants

ASTM C1279 - 05

NZS 4223.1:2008 cites ASTM C1279 - 05 Standard test method for non-destructive photoelastic measurement of edge and surface stresses in annealed, heat-strengthened, and fully tempered flat glass

ASTM C1281:2003

NZS 4223.1:2008 cites ASTM C1281:2003 (R2009) Standard specification for preformed tape sealants for glazing applications

ASTM C1299-03

NZS 4223.1:2008 cites ASTM C1299-03 Standard guide for use in selection of liquid-applied sealants

ASTM C920-05

NZS 4223.1:2008 cites ASTM C920-05 Standard specification for elastomeric joint sealants

BS 544:1969

NZS 4223.1:2008 cites BS 544:1969 Specification for linseed oil putty for use in wooden frames

BS 6262-1:2005

NZS 4223.1:2008 cites BS 6262-1:2005 Glazing for buildings General methodology for the selection of glazing

BS 952-1:1995

NZS 4223.1:2008 cites BS 952-1:1995 Glass for glazing. Classification

BS EN 12150-1:2015

NZS 4223.1:2008 cites BS EN 12150-1:2015 Glass in building. Thermally toughened soda lime silicate safety glass. Definition and description

BS EN 14449:2005

NZS 4223.1:2008 cites BS EN 14449:2005 Glass in building. Laminated glass and laminated safety glass. Evaluation of conformity/product standard

BS EN 1863-1:2011

NZS 4223.1:2008 cites BS EN 1863-1:2011 Glass in building. Heat strengthened soda lime silicate glass. Definition and description

WGANZ Specification 140307:2013 (R 3.0)

NZS 4223.1:2008 cites WGANZ Specification 140307:2013 - WGANZ Industry Standards for Glazing Blocks

WGANZ Specification 170103:2012

NZS 4223.1:2008 cites WGANZ Specification 170103:2012 - Glazing and other seals used in the manufacture of joinery

Feedback