AS ISO 9705-2003 (R2016) Fire tests - Full-scale room test for surface products
- Abbreviation
- AS ISO 9705-2003 (R2016)
- Valid from
- 16/05/2003
- Information provider
- Intertek Inform,
- Author
- Standards Australia, International Organisation for Standardization
- Information type
- Australian Standard,
- Format
- PDF, HARD COPY,
Description
This Standard specifies a test method that simulates a fire that under well ventilated conditions starts in a corner of a small room with a single open doorway.
The method is intended to evaluate the contribution to fire growth provided by a surface product using a specified ignition source. A standard ignition source is specified, but other alternatives are allowed. It should, however, be noted that the type, position and heat output of the ignition source will considerably influence the fire growth.
Scope
The method is especially suitable for products that for some reason cannot be tested in a small laboratory scale, for example thermoplastic materials, the effect of an insulating substrate, joints, surfaces with great irregularity.
The method is not intended to evaluate the fire re-sistance of a product.
A test performed in accordance with the method specified in this International Standard provides data for the early stages of a fire from ignition up to flashover.
This resource is cited by:
AS ISO 9705-2003 (R2016) Fire tests - Full-scale room test for surface products
This document is CITED BY:
-
C/AS2 (First Edition, Amd 1 (Errata 1) (First Edition, Amendment 1 (Errata1 - 22/10/2019))
AS ISO 9705-2003 (R2016) is cited by Acceptable Solution C/AS2: Buildings other than Risk Group SH from 27/06/2019
-
C/AS2 (Amd 2) (First Edition, Amendment 2)
AS ISO 9705-2003 (R2016) is cited by Acceptable Solution C/AS2: Buildings other than Risk Group SH from 27/06/2019
-
C/AS2 (Amd 3) (First Edition, Amendment 3.)
AS ISO 9705-2003 (R2016) is cited by Acceptable Solution C/AS2: Buildings other than Risk Group SH from 27/06/2019
-
C/AS2 (First edition, amendment 4)
AS ISO 9705-2003 (R2016) is cited by Acceptable Solution C/AS2: Buildings with Sleeping (non institutional) (Risk Group SM) from 1/01/2017
-
C/AS3 (First edition, amendment 4)
AS ISO 9705-2003 (R2016) is cited by Acceptable Solution C/AS3: Buildings Where Care or Detention is Provided (Risk Group SI) from 1/01/2017
-
C/AS4 (First edition, amendment 4)
AS ISO 9705-2003 (R2016) is cited by Acceptable Solution C/AS4: Buildings with Public Access and Educational Facilities (Risk Group CA) from 1/01/2017
-
C/AS5 (First edition, amendment 4)
AS ISO 9705-2003 (R2016) is cited by Acceptable Solution C/AS5: Buildings used for Business, Commercial and Low Level Storage (Risk Group WB) from 1/01/2017
-
C/AS6 (First edition, amendment 4)
AS ISO 9705-2003 (R2016) is cited by Acceptable Solution C/AS6: Buildings used for High Level Storage and Other High Risk Purposes (Risk Group WS) from 1/01/2017
This resource cites:
AS ISO 9705-2003 (R2016) Fire tests - Full-scale room test for surface products
This document CITES:
AS ISO 9705-2003 (R2016) cites ISO 3261:1975 Fire Tests - Vocabulary