Skip to main content Skip to primary navigation
Resource detail
Citations

ISO 9705-1:2016 Reaction to fire tests — Room corner test for wall and ceiling lining products — Part 1: Test method for a small room configuration

View on Information Provider website
Abbreviation
ISO 9705-1:2016
Valid from
18/02/2016
Information provider
Standards New Zealand,
Author
International Organization for Standardization
Information type
ISO Standard,
Format
PDF, HARD COPY,
Cited By
This resource is cited by 1 document (show Citations)
Description

This Standard specifies the test method to evaluate the reaction of wall and ceiling products to fire when installed at the surface of a small room and exposed directly to a specified ignition source. The test represents a fire scenario, which starts under well-ventilated conditions in a corner of a specified room with a single open doorway.

Tests performed in accordance with the method specified in this part of ISO 9705 provide data for the early stages of a fire from ignition up to flashover. The method does not evaluate the fire resistance of products.

The method is not intended to evaluate floor coverings. This method is not suitable for sandwich panel building systems, pipe insulation and façades for which specific ISO standards (i.e. ISO 13784, ISO 20632 and ISO 13785, respectively) are available.

For assistance with locating previous versions, please contact the information provider.
View on Information Provider website
For assistance with locating previous versions, please contact the information provider.
This resource is cited by:

ISO 9705-1:2016 Reaction to fire tests — Room corner test for wall and ceiling lining products — Part 1: Test method for a small room configuration

This document is CITED BY:

ISO 9705-1:2016 Reaction to fire tests — Room corner test for wall and ceiling lining products — Part 1: Test method for a small room configuration

Description

This Standard specifies the test method to evaluate the reaction of wall and ceiling products to fire when installed at the surface of a small room and exposed directly to a specified ignition source. The test represents a fire scenario, which starts under well-ventilated conditions in a corner of a specified room with a single open doorway.

Tests performed in accordance with the method specified in this part of ISO 9705 provide data for the early stages of a fire from ignition up to flashover. The method does not evaluate the fire resistance of products.

The method is not intended to evaluate floor coverings. This method is not suitable for sandwich panel building systems, pipe insulation and façades for which specific ISO standards (i.e. ISO 13784, ISO 20632 and ISO 13785, respectively) are available.

View on Information Provider website
ISO 9705-1:2016 Reaction to fire tests — Room corner test for wall and ceiling lining products — Part 1: Test method for a small room configuration
Description

This Standard specifies the test method to evaluate the reaction of wall and ceiling products to fire when installed at the surface of a small room and exposed directly to a specified ignition source. The test represents a fire scenario, which starts under well-ventilated conditions in a corner of a specified room with a single open doorway.

Tests performed in accordance with the method specified in this part of ISO 9705 provide data for the early stages of a fire from ignition up to flashover. The method does not evaluate the fire resistance of products.

The method is not intended to evaluate floor coverings. This method is not suitable for sandwich panel building systems, pipe insulation and façades for which specific ISO standards (i.e. ISO 13784, ISO 20632 and ISO 13785, respectively) are available.

View on Information Provider website
This resource does not cite any other resources.

ISO 9705-1:2016 Reaction to fire tests — Room corner test for wall and ceiling lining products — Part 1: Test method for a small room configuration

This resource does not CITE any other resources.
Feedback