Code of Practice for Weathertight Concrete and Concrete Masonry Construction
- Abbreviation
- CCANZ CP 01:2014
- Amendment
- Errata 1 January 2015
- Valid from
- 1/01/2014
- Information provider
- CCANZ,
- Author
- The Cement and Concrete Association of New Zealand (CCANZ)
- Information type
- Code of Practice,
- Format
- PDF,
Description
This code of practice covers the weathertightness of the building envelope for:
- Concrete slab on ground,
- Concrete and concrete masonry wall systems,
- Concrete flat roofs and decks, and
- Concrete to timber construction junctions.
Scope
The building type shall be as per the following limitations:
a) Buildings shall comply with importance levels 1 & 2 of AS/NZS 1170 - Structural Design Actions,
b) Buildings shall be built on good ground as defined in NZS 4229, but with “liquefaction and lateral spread”
added to the list of excluded ground,
c) The building configuration shall comply with NZS 4229, 1.1.3 (e) except that the total floor area for single
storey buildings can be up to 1000m², and
d) The slope of the finished concrete roof and deck membrane shall be no less than 1.5°.
This Code of Practice covers three types of concrete walls:
A. Concrete masonry construction
B. Insitu concrete construction, and
C. Precast concrete construction.
This Code of Practice also provides weathertightness details for four alternative positions for the wall insulation:
- On the inner face of the wall, or
- On the outside face of the wall (EIFS systems), or
- Integral within the wall itself, or
- Within a ventilated cavity.
This resource is cited by:
Code of Practice for Weathertight Concrete and Concrete Masonry Construction
This document is CITED BY:
-
E2/AS3 (Amd 7) (Third edition, amendment 7)
CCANZ CP 01:2014 is cited by Acceptable Solution E2/AS3: Concrete and Concrete Masonry Buildings from 14/02/2014
-
E2/AS3 (Amd 6) (Third Edition, Amendment 6)
CCANZ CP 01:2014 is cited by Acceptable Solution E2/AS3: Concrete and Concrete Masonry Buildings from 14/02/2014
-
E2/AS3 (Amd 8) (Third Edition, Amendment 8)
CCANZ CP 01:2014 is cited by Acceptable Solution E2/AS3: Concrete and Concrete Masonry Buildings from 14/02/2014
-
E2/AS3 (Amd 9) (Third Edition, Amendment 9)
CCANZ CP 01:2014 is cited by Acceptable Solution E2/AS3: Concrete and Concrete Masonry Buildings from 14/02/2014
-
E2/AS3 (Amd 10) (Third Edition, Amendment 10.)
CCANZ CP 01:2014 is cited by Acceptable Solution E2/AS3: Concrete and Concrete Masonry Buildings from 14/02/2014
-
E2/AS3 (Amd 5, Errata 2) (Third Edition, Amendment 5, Errata 2)
CCANZ CP 01:2014 is cited by Acceptable Solution E2/AS3: Concrete and Concrete Masonry Buildings from 1/08/2011
-
E2/AS3 (Amd 5) (Third Edition, Amendment 5)
CCANZ CP 01:2014 is cited by Acceptable Solution E2/AS3: Concrete and Concrete Masonry Buildings from 1/08/2011
This resource cites:
Code of Practice for Weathertight Concrete and Concrete Masonry Construction
This document CITES:
CCANZ CP 01:2014 cites AS/NZS 1170.0:2002 Structural Design Actions - General principles
CCANZ CP 01:2014 cites AS/NZS 1170.1:2002 (R2016) Structural Design Actions - Permanent, imposed and other actions
CCANZ CP 01:2014 cites AS/NZS 1170.2:2002 Structural Design Actions - Wind Actions
CCANZ CP 01:2014 cites AS/NZS 1170.3:2003 (R2016) Structural Design Actions - Snow and ice actions
CCANZ CP 01:2014 cites AS/NZS 2311:2000 Guide to the painting of buildings
CCANZ CP 01:2014 cites AS/NZS 2699.1:2000 Built-in components for masonry construction - Wall ties
CCANZ CP 01:2014 cites AS/NZS 2699.3:2000 Built-in components for masonry construction - Part 3: Lintels and shelf angles (durability requirements)
CCANZ CP 01:2014 cites AS/NZS 2728:2007 Prefinished/prepainted sheet metal products for interior/exterior building applications - Performance requirements
CCANZ CP 01:2014 cites AS/NZS 4256.2:1994 Plastic roof and wall cladding materials - Unplasticized polyvinyl chloride (uPVC) building sheets
CCANZ CP 01:2014 cites AS/NZS 4455.1:2008 Masonry units, pavers, flags and segmental retaining wall units - Masonry units
CCANZ CP 01:2014 cites AS/NZS 4456:2003 Masonry units, segmental pavers and flags - Methods of test
CCANZ CP 01:2014 cites AS/NZS 4671:2001 Steel reinforcing materials
CCANZ CP 01:2014 cites AS/NZS 4858:2004 (R2020) Wet area membranes
CCANZ CP 01:2014 cites NZS 1170.5:2004 (Excl. A1) Structural Design Actions - Part 5: Earthquake design actions - New Zealand - Sponsored.
CCANZ CP 01:2014 cites NZS 3101.1:2006 (inc A1, A2) Concrete structures standard. - Part 1: The design of concrete structures. - SPONSORED.
CCANZ CP 01:2014 cites NZS 3101.2:2006 (inc A1, A2) Concrete structures standard. - Part 2: Commentary on the design of concrete structures. - SPONSORED.
CCANZ CP 01:2014 cites NZS 3104:2003 Specification for concrete production
CCANZ CP 01:2014 cites NZS 3109:1997 Concrete construction - SPONSORED
CCANZ CP 01:2014 cites NZS 3114:1987 Specification for concrete surface finishes - SPONSORED
CCANZ CP 01:2014 cites NZS 3602:2003 Timber and wood-based products for use in building - SPONSORED
CCANZ CP 01:2014 cites NZS 3604:2011 Timber-framed buildings - SPONSORED
CCANZ CP 01:2014 cites NZS 4210:2001 Code of practice for masonry construction: materials and workmanship - SPONSORED
CCANZ CP 01:2014 cites NZS 4211:2008 Specification for performance of windows - SPONSORED
CCANZ CP 01:2014 cites NZS 4229:2013 Concrete masonry buildings not requiring specific engineering design - SPONSORED
CCANZ CP 01:2014 cites NZS 4230:2004 Design of reinforced concrete masonry structures - SPONSORED
CCANZ CP 01:2014 cites NZS 4251.1:2007 Solid plastering - Cement plaster for walls, ceilings and soffits - SPONSORED
CCANZ CP 01:2014 cites SNZ HB 4236:2002 Masonry veneer wall cladding - SPONSORED
CCANZ CP 01:2014 cites AS 1366.3-1992 (R2018) Rigid cellular plastics sheets for thermal insulation - Rigid cellular polystyrene - moulded (RC/PS-M)
CCANZ CP 01:2014 cites AS 1366.4-1989 (R2018) Rigid cellular plastics sheets for thermal insulation - Rigid cellular polystyrene - extruded (RC/PS-E)
CCANZ CP 01:2014 cites ASTM C1330 - 02 Standard Specification for Cylindrical Sealant - Backing for Use with Cold Liquid Applied Sealants
CCANZ CP 01:2014 cites ASTM C1549 - 02 Standard Test Method for Determination of Solar Reflectance Near Ambient Temperature Using a Portable Solar Reflectometer
CCANZ CP 01:2014 cites ASTM C755-10 Standard Practice for Selection of Water Vapor - Retarders for Thermal Insulation
CCANZ CP 01:2014 cites ASTM D2842-06 Standard Test Method for Water Absorption of Rigid Cellular Plastics
CCANZ CP 01:2014 cites ASTM D6134-97 Standard Specification for Vulcanised Rubber Sheets Used in Waterproofing Systems
CCANZ CP 01:2014 cites ASTM D7105 - 06 Standard Test Method for Determining the Adhesive and Cohesive Strength Between Materials in Roofing or Waterproofing Membranes and Systems
CCANZ CP 01:2014 cites ASTM D903 - 98(2010) Standard Test Method for Peel or Stripping Strength of Adhesive Bonds
CCANZ CP 01:2014 cites ASTM E104-02 Standard Practice for Maintaining Constant Relative Humidity by Means of Aqueous Solutions
CCANZ CP 01:2014 cites ASTM E2098-00 Standard Test Method for Determining Tensile Breaking Strength of Glass Fibre Reinforcing Mesh for Use in Class PB Exterior Insulation and Finish Systems (EIFS), after Exposure to a Sodium Hydroxide Solution
CCANZ CP 01:2014 cites ASTM E2134 - 01 (2006) Standard Test Method for Evaluating the Tensile-Adhesion Performance of an Exterior Insulation and Finish System (EIFS)
CCANZ CP 01:2014 cites ASTM E903 - 96 Standard Test Method for Solar Absorbtance, Reflectance, and Transmittance of Materials Using Integrating Spheres
CCANZ CP 01:2014 cites Evaluation Method (No.5 2005) - Test procedure for adhesive, primers and seam tapes for butyl and EPDM rubber waterproofing membranes, EM5 (2005)
CCANZ CP 01:2014 cites BS EN 1504-2:2004 Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity - Part 2: Surface protection systems for concrete
CCANZ CP 01:2014 cites Code of Practice for Torch-on Membrane Systems for Roofs and Decks
CCANZ CP 01:2014 cites EIMA 101.91:1992 EIFS Industry Members Association. Standard Guide for use of resin coated, glass fiber mesh in exterior insulation and finish systems (EIFS), Class PB.
CCANZ CP 01:2014 cites Federal Specification Standard TT-S-00230C Elastomeric type, cold applied single component for caulking, sealing and glazing in buildings, building areas (plazas, decks, pavements) and other structures
CCANZ CP 01:2014 cites ICBO Evaluation AC148 Acceptance criteria for flashing materials
CCANZ CP 01:2014 cites ISO 11600:2002 Building Construction - Jointing products. Classification and requirements for sealants
CCANZ CP 01:2014 cites TM 34 Tilt-up Technical Manual