NZS 4251.1:2007 Solid plastering - Cement plaster for walls, ceilings and soffits - SPONSORED

Abbreviation: NZS 4251.1:2007
Valid from: 26/07/1998
Replaces: ,

Information provider: Standards New Zealand,
Author: Standards New Zealand
Information type: New Zealand Standard,
Format: PDF, HARD COPY,

Cited By: This resource is cited by 27 documents (show Citations)
Cites: This resource cites 39 documents (show Citations)

Description

This Standard sets out the requirements for solid plaster, and stucco over a drained and vented cavity with a rigid or non-rigid backing in buildings to achieve structurally sound, hard, durable and water resistant surfaces.

This revision has introduced the requirement of cavity behind the plaster and applies to exterior and interior walls where impact loads are limited to soft body impacts associated with domestic use.

Scope

It deals with the preparation, mixing and application of cement-based plasters to walls, ceilings and soffits of solid substrates, and exterior stucco on rigid backing and non-rigid backings.

Stucco applications shall apply to buildings within the scope of 1.1.2 of NZS 3604. NZS 4251.1 applies to exterior and interior walls where impact loads are limited to soft-body impacts associated with domestic use.

Gypsum-based plaster and modified or proprietary modified plaster coatings are not included in this Standard.

For assistance with locating previous versions, please contact the information provider.

Notes/comments

The Building System Performance branch of MBIE has sponsored access to view and print a single downloadable PDF copy of this standard at no charge.

View on Information Provider website

For assistance with locating previous versions, please contact the information provider.

The Building System Performance branch of MBIE has sponsored access to view and print a single downloadable PDF copy of this standard at no charge.

This resource is cited by:

NZS 4251.1:2007 Solid plastering - Cement plaster for walls, ceilings and soffits - SPONSORED

This document is CITED BY:

B1/AS1 (Amd 17) (First Edition, Amendment 17)

NZS 4251.1:2007 is cited by Acceptable Solution B1/AS1: General from 1/08/2011
B1/AS1 (Amd 21) (First Edition, Amendment 21)

NZS 4251.1:2007 is cited by Acceptable Solution B1/AS1: General from 1/08/2011
B1/AS1 (Amd 20) (First edition, Amendment 20)

NZS 4251.1:2007 is cited by Acceptable Solution B1/AS1: General from 1/08/2011
B1/AS1 (Amd 15) (First Edition, Amendment 15)

NZS 4251.1:2007 is cited by Acceptable Solution B1/AS1: General from 1/08/2011
B1/AS1 (Amd 19) (First edition, Amendment 19)

NZS 4251.1:2007 is cited by Acceptable Solution B1/AS1: General from 1/08/2011
B1/AS1 (Amd 18) (First Edition, Amendment 18)

NZS 4251.1:2007 is cited by Acceptable Solution B1/AS1: General from 1/08/2011
B1/AS1 (Amd 16) (First edition, Amendment 16)

NZS 4251.1:2007 is cited by Acceptable Solution B1/AS1: General from 1/08/2011
B1/AS1 (Amd 11) (First edition, Amendment 11)

NZS 4251.1:2007 is cited by Acceptable Solution B1/AS1: General from 1/08/2011
B1/AS1 (Amd 14) (First edition, Amendment 14)

NZS 4251.1:2007 is cited by Acceptable Solution B1/AS1: General from 1/08/2011
B1/AS1 (Amd 13) (First edition, Amendment 13)

NZS 4251.1:2007 is cited by Acceptable Solution B1/AS1: General from 1/08/2011
B1/AS1 (Amd 12) (First edition, Amendment 12)

NZS 4251.1:2007 is cited by Acceptable Solution B1/AS1: General from 1/08/2011
B2/AS1 (Amd 8) (Second edition, Amendment 8)

NZS 4251.1:2007 is cited by Acceptable Solution B2/AS1: Durability Applications from 30/09/2010
B2/AS1 (Amd 12) (Second Edition, Amendment 12)

NZS 4251.1:2007 is cited by Acceptable Solution B2/AS1: Durability Applications from 30/09/2010
B2/AS1 (Amd 11) (Second Edition, Amendment 11)

NZS 4251.1:2007 is cited by Acceptable Solution B2/AS1: Durability Applications from 30/09/2010
B2/AS1 (Amd 10) (Second Edition, Amendment 10)

NZS 4251.1:2007 is cited by Acceptable Solution B2/AS1: Durability Applications from 30/09/2010
B2/AS1 (Amd 9) (Second edition, Amendment 9)

NZS 4251.1:2007 is cited by Acceptable Solution B2/AS1: Durability Applications from 30/09/2010
B2/AS1 (Amd 7) (Second edition, Amendment 7)

NZS 4251.1:2007 is cited by Acceptable Solution B2/AS1: Durability Applications from 30/09/2010
E2/AS1 (Amd 8) (Third Edition, Amendment 8)

NZS 4251.1:2007 is cited by Acceptable Solution E2/AS1: External Moisture from 1/08/2011
E2/AS1 (Amd 5) (Third Edition, Amendment 5)

NZS 4251.1:2007 is cited by Acceptable Solution E2/AS1: External Moisture from 1/08/2011
E2/AS1 (Amd 9) (Third Edition, Amendment 9)

NZS 4251.1:2007 is cited by Acceptable Solution E2/AS1: External Moisture from 1/08/2011
E2/AS1 (Amd 5, Errata 2) (Third Edition, Amendment 5, Errata 2)

NZS 4251.1:2007 is cited by Acceptable Solution E2/AS1: External Moisture from 1/08/2011
E2/AS1 (Amd 6) (Third Edition, Amendment 6)

NZS 4251.1:2007 is cited by Acceptable Solution E2/AS1: External Moisture from 1/08/2011
E2/AS1 (Amd 10) (Third Edition, Amendment 10)

NZS 4251.1:2007 is cited by Acceptable Solution E2/AS1: External Moisture from 1/08/2011
E2/AS1 (Amd 7) (Third Edition, Amendment 7)

NZS 4251.1:2007 is cited by Acceptable Solution E2/AS1: External Moisture from 1/08/2011
CCANZ CP 01:2014

NZS 4251.1:2007 is cited by Code of Practice for Weathertight Concrete and Concrete Masonry Construction
CCANZ CP 01:2022

NZS 4251.1:2007 is cited by Code of Practice for Weathertight Concrete and Concrete Masonry Construction
NASH Building Envelope Solutions: 2019

NZS 4251.1:2007 is cited by NASH Building Envelope Solutions: 2019 - Light Steel Framed Buildings.

NZS 4251.1:2007 Solid plastering - Cement plaster for walls, ceilings and soffits - SPONSORED

Description

This revision has introduced the requirement of cavity behind the plaster and applies to exterior and interior walls where impact loads are limited to soft body impacts associated with domestic use.

View on Information Provider website

NZS 4251.1:2007 Solid plastering - Cement plaster for walls, ceilings and soffits - SPONSORED

Description

This revision has introduced the requirement of cavity behind the plaster and applies to exterior and interior walls where impact loads are limited to soft body impacts associated with domestic use.

View on Information Provider website

This resource cites:

NZS 4251.1:2007 Solid plastering - Cement plaster for walls, ceilings and soffits - SPONSORED

This document CITES:

AS/NZS 1170.0:2002

NZS 4251.1:2007 cites AS/NZS 1170.0:2002 Structural Design Actions - General principles

AS/NZS 1170.1:2002

NZS 4251.1:2007 cites AS/NZS 1170.1:2002 (R2016) Structural Design Actions - Permanent, imposed and other actions

AS/NZS 1170.2:2002

NZS 4251.1:2007 cites AS/NZS 1170.2:2002 Structural Design Actions - Wind Actions

AS/NZS 1170.3:2003 (Reconfirmed in 2016)

NZS 4251.1:2007 cites AS/NZS 1170.3:2003 (R2016) Structural Design Actions - Snow and ice actions

AS/NZS 2269:1994

NZS 4251.1:2007 cites AS/NZS 2269:1994 Plywood - Structural

AS/NZS 4534:1998

NZS 4251.1:2007 cites AS/NZS 4534:1998 Zinc and zinc/aluminium-alloy coatings on steel wire

AS/NZS 4600:2005

NZS 4251.1:2007 cites AS/NZS 4600:2005 Cold-formed steel structures

AS/NZS 4680:1999

NZS 4251.1:2007 cites AS/NZS 4680:1999 Hot-dip galvanized (zinc) coatings on fabricated ferrous articles

NZS 1170.5:2004 (Excl. A1)

NZS 4251.1:2007 cites NZS 1170.5:2004 (Excl. A1) Structural Design Actions - Part 5: Earthquake design actions - New Zealand - Sponsored.

NZS 3103:1991

NZS 4251.1:2007 cites NZS 3103:1991 Specification for sands for mortars and plasters

NZS 3109:1997

NZS 4251.1:2007 cites NZS 3109:1997 Concrete construction - SPONSORED

NZS 3111:1986

NZS 4251.1:2007 cites NZS 3111:1986 Methods of test for water and aggregate for concrete

NZS 3117:1980

NZS 4251.1:2007 cites NZS 3117:1980 (BS 1014:1975) Specification for pigments for Portland cement and Portland cement products

NZS 3121:1986

NZS 4251.1:2007 cites NZS 3121:1986 Specification for water and aggregate for concrete

NZS 3122:1995

NZS 4251.1:2007 cites NZS 3122:1995 Specification for Portland and blended cements (General and special purpose)

NZS 3123:1974

NZS 4251.1:2007 cites NZS 3123:1974 Specification for Portland pozzolan cement (type PP cement)

NZS 3125:1991

NZS 4251.1:2007 cites NZS 3125:1991 Specification for portland-limestone filler cement

NZS 3602:2003

NZS 4251.1:2007 cites NZS 3602:2003 Timber and wood-based products for use in building - SPONSORED

NZS 3604:1999

NZS 4251.1:2007 cites NZS 3604:1999 Timber framed buildings - SPONSORED

NZS 3640:2003

NZS 4251.1:2007 cites NZS 3640:2003 Chemical preservation of round and sawn timber - SPONSORED

NZS 4210:2001

NZS 4251.1:2007 cites NZS 4210:2001 Code of practice for masonry construction: materials and workmanship - SPONSORED

NZS/AS 2908.2:1992

NZS 4251.1:2007 cites NZS/AS 2908.2:1992 Cellulose-cement products - Part 2: Flat sheets

AS 1366.4-1989 (Reconfirmed in 2018)

NZS 4251.1:2007 cites AS 1366.4-1989 (R2018) Rigid cellular plastics sheets for thermal insulation - Rigid cellular polystyrene - extruded (RC/PS-E)

AS 1478.1-2000 (Reconfirmed in 2018)

NZS 4251.1:2007 cites AS 1478.1-2000 (R2018) Chemical admixtures for concrete, mortar and grout - Admixtures for concrete

AS 1672.1-1997

NZS 4251.1:2007 cites AS 1672.1-1997 (R2016) Limes and limestones - Limes for building

AS 2758.1-1998

NZS 4251.1:2007 cites AS 2758.1-1998 Aggregates and rock for engineering purposes

AS 3566.1-2002 (R2015)

NZS 4251.1:2007 cites AS 3566.1-2002 (R2015) Self-drilling screws for the building and construction industries - Part 1: General requirements and mechanical properties

AS 3566.2-2002

NZS 4251.1:2007 cites AS 3566.2-2002 Self-drilling screws for the building and construction industries. Part 2: Corrosion resistance requirements

AS 3730.10-2006

NZS 4251.1:2007 cites AS 3730.10-2006 (R2016) Guide to the properties of paints for buildings. Part 10: Latex - Exterior - Gloss

AS 3730.7-2006 (R2016)

NZS 4251.1:2007 cites AS 3730.7-2006 (R2016) Guide to the properties of paints for buildings. Part 7: Latex - Exterior - Flat

AS 3730.8-2006 (R2016)

NZS 4251.1:2007 cites AS 3730.8-2006 (R2016) Guide to the properties of paints for buildings. Part 8: Latex - Exterior - Low-gloss

AS 3730.9-2006 (R2016)

NZS 4251.1:2007 cites AS 3730.9-2006 (R2016) Guide to the properties of paints for buildings. Part 9: Latex - Exterior - Semi-gloss

ASTM C1042-99

NZS 4251.1:2007 cites ASTM C1042-99 Test method for bond strength of latex systems used with concrete by slant shear

ASTM C1116-95

NZS 4251.1:2007 cites ASTM C1116-95 Specification for fibre-reinforced concrete and shotcrete

ASTM C1152-04e1

NZS 4251.1:2007 cites ASTM C1152-04e1 Standard test method for acid-soluble chloride in mortar and concrete

ASTM C631-95a(2004)

NZS 4251.1:2007 cites ASTM C631-95a(2004) Specification for bonding compounds for interior gypsum plastering

ASTM C932-80(2005)

NZS 4251.1:2007 cites ASTM C932-80(2005) Specification for surface-applied bonding agents for exterior plastering

ASTM C952-91

NZS 4251.1:2007 cites ASTM C952-91 (R1997) Test method for bond strength of mortar to masonry units

BS 1881-124:1988

NZS 4251.1:2007 cites BS 1881-124:1988 Testing concrete. Methods for analysis of hardened concrete

Feedback