ICBO Evaluation AC148 Acceptance criteria for flashing materials
- Abbreviation
- ICBO AC148
- Valid from
- 1/01/2001
- Information provider
- International Code Council,
- Author
- International Conference of Building Officials
- Information type
- Standard,
Description
The acceptance criteria is limited to recognition of the following:
Hip and Ridge Tape: Synthetic butyl rubberbased membranes for use as a wind and rain block beneath hips and ridges of concrete or clay tile roofs under IBC ' Section 1507.3, IRC Section R905.3 and UBC Section ' 1507.7. The membranes self-adhere to substrates.
Self-adhering Flashing: Evaluation under this ' criteria is limited to rubber-based or modified asphalt membranes, or either of these materials laminated to a fabric or plastic film, used as flashing for wall penetrations ' under IBC Section 1405.3, IRC Section R703.8 and UBC ' Section 1402.2.
Mechanically Attached Flashing: Evaluation ' under this criteria is limited to kraft-paper- or polymeric' based membranes used as flashing for wall penetrations ' under IBC Section 1405.3, IRC Section R703.8 and UBC ' Section 1402.2.
This resource is cited by:
ICBO Evaluation AC148 Acceptance criteria for flashing materials
This document is CITED BY:
-
E2/AS1 (Amd 7) (Third Edition, Amendment 7)
ICBO AC148 is cited by Acceptable Solution E2/AS1: External Moisture from 1/02/2005
-
E2/AS1 (Amd 6) (Third Edition, Amendment 6)
ICBO AC148 is cited by Acceptable Solution E2/AS1: External Moisture from 1/02/2005
-
E2/AS1 (Amd 5, Errata 2) (Third Edition, Amendment 5, Errata 2)
ICBO AC148 is cited by Acceptable Solution E2/AS1: External Moisture from 1/02/2005
-
E2/AS1 (Amd 5) (Third Edition, Amendment 5)
ICBO AC148 is cited by Acceptable Solution E2/AS1: External Moisture from 1/02/2005
-
E2/AS1 (Amd 4) (Third Edition, Amendment 4)
ICBO AC148 is cited by Acceptable Solution E2/AS1: External Moisture from 1/02/2005
-
E2/AS1 (Amd 8) (Third Edition, Amendment 8)
ICBO AC148 is cited by Acceptable Solution E2/AS1: External Moisture from 1/02/2005
-
E2/AS1 (Amd 9) (Third Edition, Amendment 9)
ICBO AC148 is cited by Acceptable Solution E2/AS1: External Moisture from 1/02/2005
-
E2/AS1 (Amd 10) (Third Edition, Amendment 10)
ICBO AC148 is cited by Acceptable Solution E2/AS1: External Moisture from 1/02/2005
-
CCANZ CP 01:2014
ICBO AC148 is cited by Code of Practice for Weathertight Concrete and Concrete Masonry Construction
-
CCANZ CP 01:2022
ICBO AC148 is cited by Code of Practice for Weathertight Concrete and Concrete Masonry Construction
-
NASH Building Envelope Solutions: 2019
ICBO AC148 is cited by NASH Building Envelope Solutions: 2019 - Light Steel Framed Buildings.
This resource cites:
ICBO Evaluation AC148 Acceptance criteria for flashing materials
This document CITES:
ICBO AC148 cites Acceptance Criteria For Test Reports (AC85)
ICBO AC148 cites Acceptance Criteria For Laboratory Accreditation AC89
ICBO AC148 cites ASTM C794-80 Standard Test Method for Adhesion-in-peel of Elastomeric Joint Sealants
ICBO AC148 cites ASTM D1970-90 Standard Specification for Self-Adhering Polymer Modified Bituminous Sheet Materials Used as Steep Roofing Underlayment for Ice Dam Protection
ICBO AC148 cites ASTM D412-98a Test Method for Vulcanized Rubber and Thermoplastic Rubbers and Thermoplastic Elastomers-Tension
ICBO AC148 cites TM127-TM 127 Water Resistance: Hydrostatic Pressure Test (AATC Method 127)