AS/NZS 2728:2007 Prefinished/prepainted sheet metal products for interior/exterior building applications - Performance requirements
- Abbreviation
- AS/NZS 2728:2007
- Valid from
- 19/02/2007
- Replaces
- AS/NZS 2728:1997,
- Information provider
- Standards New Zealand,
- Author
- Standards New Zealand, Standards Australia
- Information type
- New Zealand Standard,
- Format
- PDF, HARD COPY,
Description
This Standard specifies performance requirements for prepainted and organic film/metal laminate products in sheet and strip form that are coated on one or both sides, and that are intended for fabrication into products for use in the construction or finishing of buildings.
Scope
The Standard classifies prefinished/prepainted metal products into six types according to their performance, in respect to durability and aesthetics, in environments of varying severity.
This resource is cited by:
AS/NZS 2728:2007 Prefinished/prepainted sheet metal products for interior/exterior building applications - Performance requirements
This document is CITED BY:
-
E2/AS1 (Amd 5, Errata 2) (Third Edition, Amendment 5, Errata 2)
AS/NZS 2728:2007 is cited by Acceptable Solution E2/AS1: External Moisture from 1/08/2011
-
E2/AS1 (Amd 5) (Third Edition, Amendment 5)
AS/NZS 2728:2007 is cited by Acceptable Solution E2/AS1: External Moisture from 1/08/2011
-
CCANZ CP 01:2014
AS/NZS 2728:2007 is cited by Code of Practice for Weathertight Concrete and Concrete Masonry Construction
-
SH/AS1 (First edition, unamended)
AS/NZS 2728:2007 is cited by Simple House - Acceptable Solution Revoked
This resource cites:
AS/NZS 2728:2007 Prefinished/prepainted sheet metal products for interior/exterior building applications - Performance requirements
This document CITES:
AS/NZS 2728:2007 cites AS/NZS 1580.108.1:1994 (R2013) Methods of test for paints and related materials - Determination of dry film thickness on metallic substrates - Non destructive methods
AS/NZS 2728:2007 cites AS/NZS 1580.457.1:1996 (R2013) Methods of test for paints and related materials - Resistance to natural weathering
AS/NZS 2728:2007 cites AS/NZS 1580.481.1.10:1998 (R2013) Methods of test for paints and related materials - Exposed to weathering - Degree of flaking and peeling
AS/NZS 2728:2007 cites AS/NZS 1580.481.1.11:1998 (R2013) Methods of test for paints and related materials - Exposed to weathering - Degree of chalking
AS/NZS 2728:2007 cites AS/NZS 1580.481.1.5:1999 (R2013) Methods of test for paints and related materials - Exposed to weathering - Change in gloss
AS/NZS 2728:2007 cites AS/NZS 1580.481.1.7:1998 (R2013) Methods of test for paints and related materials - Exposed to weathering - Degree of checking
AS/NZS 2728:2007 cites AS/NZS 1580.481.1.8:1998 (R2013) Methods of test for paints and related materials - Exposed to weathering - Degree of cracking
AS/NZS 2728:2007 cites AS/NZS 1580.481.1.9:1998 (R2013) Methods of test for paints and related materials - Exposed to weathering - Degree of blistering
AS/NZS 2728:2007 cites AS/NZS 1580.601.1:1995 (R2013) Methods of test for paints and related materials - Colour - Visual comparison
AS/NZS 2728:2007 cites AS/NZS 1580.601.4:1994 (R2013) Methods of test for paints and related materials - Colour - Calculation of colour differences
AS/NZS 2728:2007 cites AS/NZS 1580.602.2:1995 (R2013) Paints and related materials - Methods of test - - Measurement of specular gloss of non-metallic paint films at 20 degrees, 60 degrees and 85 degrees
AS/NZS 2728:2007 cites AS/NZS 2312:2002 Guide to the protection of structural steel against atmospheric corrosion by the use of protective coatings
AS/NZS 2728:2007 cites AS 1199.1-2003 (R2016) Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
AS/NZS 2728:2007 cites AS 1397-2001 Steel sheet and strip - Hot-dipped zinc-coated or aluminium/zinc-coated
AS/NZS 2728:2007 cites AS 1580.408.4-2004 Paints and related materials - Methods of test - Method 408.4: Adhesion (crosscut)
AS/NZS 2728:2007 cites AS 1580.481.3-2002 (R2013) Paints and related materials - Methods of test - Coatings - Exposed to weathering - Degree of corrosion of coated metal substrates
AS/NZS 2728:2007 cites AS 1734-1986 Aluminium and aluminium alloys - Flat sheet, coiled sheet and plate
AS/NZS 2728:2007 cites AS 2313.1.1-2005 (R2016) Methods of test for single sided and double sided pressure-sensitive adhesive tape - Adhesion - Peel adhesion
AS/NZS 2728:2007 cites AS 2331.1.7-2006 (R2017) Methods of test for metallic and related coatings - Local thickness tests - Measurement of dry film thickness of thin coating systems particularly by coil coated products by destructive means using a boring device
AS/NZS 2728:2007 cites AS 2331.3.1-2001 (R2017) Methods of test for metallic and related coatings - Corrosion and related property tests - Neutral salt spray (NSS) test
AS/NZS 2728:2007 cites AS 2331.3.13-2006 (R2017) Methods of test for metallic and related coatings - Corrosion and related property tests - Wet (salt fog)/dry/humidity
AS/NZS 2728:2007 cites AS 2331.3.2-2001 (R2017) Methods of test for metallic and related coatings - Corrosion and related property tests - Acetic acid salt spray test (ASS test)
AS/NZS 2728:2007 cites AS 2331.4.7-2006 (R2017) Methods of test for metallic and related coatings - Method 4.7: Physical tests - Resistance to scratching
AS/NZS 2728:2007 cites AS 2848.1-1998 (R2018) Aluminium and aluminium alloys - Compositions and designations - Part 1: Wrought products
AS/NZS 2728:2007 cites ASTM G154 - 06 Standard Practice for Operating Fluorescent Light Apparatus for UV Exposure of Nonmetallic Materials
AS/NZS 2728:2007 cites ISO 9001:2000 Quality management systems - Requirements
AS/NZS 2728:2007 cites ISO 9223:1992 Corrosion of metals and alloys; corrosivity of atmospheres; classification