AS 1580.408.4-2004 Paints and related materials - Methods of test - Method 408.4: Adhesion (crosscut)
- Abbreviation
- AS 1580.408.4-2004
- Valid from
- 26/11/2004
- Information provider
- Intertek Inform,
- Author
- Standards Australia
- Information type
- Australian Standard,
- Format
- PDF, HARD COPY,
Description
This Standard sets out a method for assessing the adhesion of paint coatings to substrates by applying and removing pressure-sensitive adhesive tape over cuts made in the coating. The method is also applicable as a field procedure, when not under the controlled environmental conditions of AS 1580.101.1, however the temperature of the surface needs to be recorded.
Scope
This Standard is not applicable to soft or friable substrates.
Notes:
- The method is not considered suitable for coatings thicker than 125micron.
- The method does not distinguish between high levels of adhesion for which more complex procedures are required, such as a pull-off adhesion test similar to ASTMD4541 or ISO4624.
- In multi coat systems, if adhesion failure occurs between coats, the adhesion of the coating system to the substrate cannot be determined.
This resource is cited by:
AS 1580.408.4-2004 Paints and related materials - Methods of test - Method 408.4: Adhesion (crosscut)
This document is CITED BY:
-
AS/NZS 2280:2014
AS 1580.408.4-2004 is cited by AS/NZS 2280:2014 Ductile iron pipes and fittings
-
AS/NZS 2280:2020
AS 1580.408.4-2004 is cited by AS/NZS 2280:2020 Ductile iron pipes and fittings
-
AS/NZS 2712:2007
AS 1580.408.4-2004 is cited by AS/NZS 2712:2007 Solar and heat pump water heaters - Design and construction
-
AS/NZS 2728:2007
AS 1580.408.4-2004 is cited by AS/NZS 2728:2007 Prefinished/prepainted sheet metal products for interior/exterior building applications - Performance requirements
-
AS/NZS 2728:2013
AS 1580.408.4-2004 is cited by AS/NZS 2728:2013 Prefinished/prepainted sheet metal products for interior/exterior building applications - Performance requirements