Table of Contents

Part 1 – Scope And General Information

101 Scope

102 Interpretation

103 Definitions

104 Inspection And Testing Maintenance

105 Seismic Resistance

106 Workmanship

107 Typical Arrangements

108 Welding

109 Hydrostatic Tests

110 Roles And Responsibilities Of Ssc

111 Formal Interpretations

112 Sprinkler System Certificate Of Compliance Methodology

113 Listing Of Contractors

114 Listing Of Equipment

115 Withdrawal Of Listing

116 Existing Installations

Part 2 – Basic Rules Of Design

201 Installer To Be Listed

202 Minimum Required Discharge And Design Flow

203 Determination Of Fire Hazard

204 Extent Of Sprinkler Protection

205 Fire Loads Adjoining, Linked, Or Adjacent To The Sprinkler Protected Building Or Sprinkler Protected Firecell

206 Water Supply Requirements For External Sprinklers And Internal Drenchers

207 Permitted Exceptions From Sprinklering

208 Provision Of Hand Operated Firefighting Applliances

209 Provision Of Block Plan

210 Provision Of Water Supply Reference Information

211 Multi-Storeyed Buildings

212 Buildings Constructed With Expanded Plastic Cored Insulated Panels

Part 3 – Types If Installations

301 General

302 Conventional Sprinkler Installations

303 Deluge Installations

304 Water Mist Installations

305 Methods To Determine Water Delivery For Gas Filled Sprinkler Installations

Part 4 – System Components

401 General

402 Sprinklers

403 Pipework

404 Valves

405 Enhanced Safety Valve Set

406 Pressure Gauges

407 Alarm Devices

408 Storage Height Limitation Indicators

409 Aerosol Warning Signs

410 Fire Doors

Part 5 – Location Of Sprinklers

501 General

502 Walls And Partitions

503 Ceilings And Roofs

504 Staggered Spacing

505 Position Of Sprinklers

506 Vertical Obsructions To Sprinkler Discharge

507 Columns

508 Open Roof Trusses

509 Clear Space Below Sprinklers

510 Spacing And Location Of Sidewall Sprinklers

511 Locations Or Conditions Requiring Special Consideration

512 Obstructions Below Sprinklers

513 Film And Television Production Studios

514 Theatres And Music Halls

515 Cupboards And Wardrobes

516 Skylight Shafts

517 External Sprinklers

518 Special Requirements For Supression Mode Sprinklers

519 Special Requirements For Control Mode Specific Application Sprinklers

520 Extended Coverage Ordinary Hazard (Ecoh) And Extended Coverage Light Hazard (Eclh) Sprinklers – Special Requirements

Part 6 – Water Supply

601 General

602 Classes Of Water Supply

603 Flow And Pressure Requirements

604 Town's Mains, Boosted Town's Mains, Supplemented Town's Mains

605 Pumped Supplies – Water Sources

606 Water Storage

607 Pumped Supplies – Pump Units

608 Elevated Tanks

609 Pressure Tanks

610 Fire Sprinkler Inlets

611 Proving Of Water Supplies

612 Private Site Fire Mains

Part 7 – Extra Light Hazard System Design Data

701 Water Supplies

702 Sprinkler Type And Spacing

703 Pipework

704 Storage Areas And Drying Rooms

Part 8 – Ordinary Hazard System Design Data

801 Design Criteria, Pipe Sizing And Water Supplies

802 Sprinkler Type And Spacing

Part 9 – Extra High Hazard System Design Data

901 Scope

902 Extra High Hazard Class Terminology

903 General System Design Requirements

904 General Hydraulic Design Requirements

905 Hydraulic Design Requirements

906 Categorised Commodities

907 Special Commodities

908 Control Mode Specific Application Sprinklers

909 Suppression Mode Sprinklers

910 Fire Protection Scheme A

Part 10 – Fully Hydraulically Calculated Design

1001 General

1002 Design Requirements

1003 Determination Of Area Of Operation

1004 Determination Of Design Flow And Pressure

1005 Method Of Calculation

1006 Documentation

Part 11 – Precautions To Be Taken When An Installation Is Rendered Inoperative

1101 General

1102 Notification

1103 Authorisation

1104 Hot Work

1105 Sectional Valves

1106 Blanking Pieces

1107 Water Supplies

Part 12 – Routine Testing, Maintenance And Inspections

1201 General

1202 Routine Tests And Maintenance

1203 Routine Inspections

1204 Twelve-Yearly Inspections

1205 Testing Of Sprinklers

1206 Water Supply Strainers

Appendix

A – Sprinkler System Storage Declaration (Informative)

B – Material Classifications (Informative)

C – Testing Of Territorial Authority Water Mains (Normative)

D – Information To Be Provided When Ordering A Pump Unit (Informative)

E – Orifice Plates (Informative)

F – Retrospective Upgrades (Informative)

G – Recommendations For Frost Protection Measures For Fire Sprinkler Systems (I Normative))

H – Z-Values And Shortest Major Fault Distances For New Zealand (Informative)

J – Sprinkler Protection Design Requirements For Buildings Constructed With Foamed Plastic Cored Insulated Panels (Normative)

K – Aerosols – Supplementary Design Considerations (Normative)

L – Aerosol Warning Signs (Normative)

M – Contractor's Material And Test Certificate For Underground Piping (Informative)

N – Water Mist Fire Protection (Informative)

O – Embankment Supported Membrane Pillow Tanks (Normative)

P – Maintenance Provisions For Non-Standard Sprinkler Systems (Informative)

Q – Guidance On The Testing Of Sprinklers (Informative)

R – Evaluation Of Contractors By A Sprinkler System Certifier (Ssc) (Normative)

S – Certificate Of Listing Of Contractor (Normative)

T – Guidelines For Evaluation Of Equipment For Listing By A Sprinkler System Certifier (Ssc) (Normative)

U – Sprinkler System Certificate Of Compliance

Table

2.1 – Representative Schedule Of Occupancies

2.2 – Ordinary Hazard Storage Limits

2.3 – Comparison Of Classification Of Flammable Liquids

2.4 – Block Plan Sprinkler Information

2.5 – Typical Reference Pressure Schedule

2.6 – Design Data For Protection Of Expanded Plastic Cored Panels

3.1 – Antifreeze Solutions

3.2 – Gas Filled Water Delivery Calculation Design Requirements

4.1 – Acceptable Types Of Sprinklers

4.2 – Pipes To Be Used Upstream Of Control Valves

4.3 – Pipes To Be Used Downstream Of Alarm Valves

4.4 – Suitable Supports

4.5 – Weight Calculations

4.6 – Allowable Horizontal Loads Of Typical Pipework Braces

4.7 – Horizontal Load Capacity Of Typical Connections

5.1 – Spacing Arrangements – Standard And Staggered

5.2 – Sprinkler Distances From Obstructions

5.3 – Maximum Distance Of Residential Sprinklers Above Bottom Of Ceiling Obstruction

5.4 – Obstructions To Standard Sidewall Sprinkler Discharge

5.5 – Extended Coverage And Extra Light Hazard Spray Sprinkler Distances

5.6 – Sprinkler Spacing And Location

5.7 – Suppression Mode Sprinklers – Allowable Distances Below Ceiling

5.8 – Required Deflector Height Above Range Centreline

5.9 – Minimum And Maximum Distances Of Deflectors Below Ceiling

5.10 – Position Of Deflector When Located Above Bottom Of Ceiling Obstruction

5.11 – Position Of Sprinklers Relative To Obstructions Located Entirely Below

5.12 – Ecoh And Eclh Sprinkler Distances From Ceiling Mounted Obstructions

6.1 – Duration Of Water Supplies For Ehh Occupancies

6.2 – Nominal Fuel Duration

6.3 – Number Of Inlets

7.1 – Minimum Pipe Sizes For Pre-calculated Extra Light Hazard Sprinkler Arrays

8.1 – Maximum Number Of Sprinklers On Tabular Pipework

9.1 – Temperature Ratings Of Spray Sprinklers

9.2 – Maximum Area Coverage Per Roof/Ceiling Sprinkler

9.3 – Maximum In-Rack Sprinkler Horizontal Spacing (Racks Without Solid Shelves)

9.4 – In-Rack Sprinkler Vertical Spacings, Storage Height Up To 7.6 M

9.5 – Steel Column Sprinkler Protection, Option 904.4 (C) – Category 1, 2 And 3commodities (Higher Density In Lieu Of Column Sprinklers)

9.6 – Water Demands For Sprinklers Under Non-Solid Floors; Solid-Piled, Palletised, Shelf and Bin Box Storage

9.7 – Design Density And Design Area For Process Occupancies

9.8 – Roof/Ceiling Sprinkler Design Density Adjustments

9.9 – Minimum In-Rack Sprinkler Hydraulic Design Criteria

9.10 – Minimum Roof/Ceiling Sprinklers Hydraulic Design Criteria For Excessive Clearance

9.11(A) – Design Criteria For Categories 1 To 4: Solid Pile, Palletised, Shelf And Bin Box storage

9.11(B) – Design Criteria For Category 5: Solid Pile, Palletised And Shelf Storage

9.11(C) – Design Criteria For Category 6: Solid Pile, Palletised And Shelf Storage

9.11(D) – Design Criteria For Category 5: Bin Box Storage

9.11(E) – Design Criteria For Category 6: Bin Box Storage

9.12(A) – Design Criteria For Category 1: Rack Storage Height Up To 7.6 M, Without Solid Shelves

9.12(B) – Design Criteria For Category 1: Rack Storage Height Up To 7.6 M, Solid Shelves 1.9 To 5.9 M2

9.12(C) – Design Criteria For Category 1: Rack Storage Height Up To 7.6 M, Solid Shelves Greater Than 5.9 M2

9.12(D) – Design Criteria For Category 2: Rack Storage Height Up To 7.6 M, Without Solid Shelves

9.12(E) – Design Criteria For Category 2: Rack Storage Height Up To 7.6 M, Solid Shelves 1.9 To 5.9 M2

9.12(F) – Design Criteria For Category 2: Rack Storage Height Up To 7.6 M, Solid Shelves Greater Than 5.9 M2

9.12(G) – Design Criteria For Category 3: Rack Storage Height Up To 7.6 M, Without Solid Shelves

9.12(H) – Design Criteria For Category 3: Rack Storage Height Up To 7.6 M, Solid Shelves 1.9 To 5.9 M2

9.12(I) – Design Criteria For Category 3: Rack Storage Height Up To 7.6 M,Solid Shelves Greater Than 5.9 M2

9.12(J) – Design Criteria For Category 4: Rack Storage Height Up To 7.6 M,Without Solid Shelves

9.12(K) – Design Criteria For Category 4: Rack Storage Height Up To 7.6 M,Solid Shelves 1.9 To 5.9 M2

9.12(L) – Design Criteria For Category 4: Rack Storage Height Up To 7.6 M, Solid Shelves greater Than 5.9 M2

9.12(M) – Design Criteria For Category 5: Rack Storage Height Up To 7.6 M, Without Solid shelves

9.12(N) – Design Criteria For Category 5: Rack Storage Height Up To 7.6 M, Solid Shelves1.9 To 5.9 M2

9.12(O) – Design Criteria For Category 5: Rack Storage Height Up To 7.6 M, Solid Shelves greater Than 5.9 M2

9.12(P) – Part (A) Design Criteria For Category 6: Rack Storage Height Up To 7.6 M Without solid Shelves – Maximum Roof/Ceiling Height Up To 9.1 M

9.12(P) – Part (B) Design Criteria For Category 6: Rack Storage Height Up To 7.6 M Without solid Shelves – Maximum Roof/Ceiling Height From 9.2 M Up To 13.7 M

9.12(Q) – Design Criteria For Category 6: Rack Storage Height Up To 7.6 M, Solid Shelves1.9 To 5.9 M2

9.12(R) – Design Criteria For Category 6: Rack Storage Height Up To 7.6 M, Solid Shelves greater Than 5.9 M2

9.13(A) – Design Criteria For Categories 1 To 6:Rack Storage Height Greater Than 7.6 M, Single Row Rack Without Solid Shelves, Aisle Width Not less Than 1.2 M And Rack Depth Up To 2.7 M

9.13(B) – Design Criteria For Categories 1 To 5:Rack Storage Height Greater Than 7.6 M, Double Row Rack Without Solid Shelves, Aisle Width Not less Than 1.2 M And Rack Depth Up To 2.7 M

9.13(C) – Design Criteria For Categories 1 To 5:Rack Storage Height Greater Than 7.6 M, Double Row Rack Without Solid Shelves, Aisle Width Not less Than 1.2 M And Rack Depth Greater Than 2.7 M

9.13(D) – Design Criteria For Categories 1 To 5:Rack Storage Height Greater Than 7.6 M, Multiple Row Rack Without Solid Shelves Or single/Double Row Rack Without Solid Shelves And Aisle Width Less Than 1.2 M

9.13(E) – Design Criteria For Category 6: Rack Storage Height Greater Than 7.6 M, Double row Rack With Aisle Width Not Less Than 1.2 M

9.13(F) – Design Criteria For Category 6: Rack Storage Height Greater Than 7.6 M, Multiple row Rack Or Single/Double Row Rack And Aisle Width Less Than 1.2 M

9.14(A) – On-Side Storage In Permanent Tyre Racks Or Partially Loaded Portable Tyre Racks, Without Solid Shelves

9.14(B) – On Tread Storage In Permanent Tyre Racks Or Portable Tyre Racks, Without Solid Shelves

9.14(C) – On Floor Or On Side Storage In Fully Loaded Portable Tyre Racks

9.14(D) – Locations Other Than Warehouses And ‘Green’ Tyres

9.14(E) – Control Mode Specific Application Criteria For On-Side And On-Tread Rubber Tyres

9.14(F) – Suppression Mode Sprinklers For Rubber Tyre Storage

9.15 – Area Coverage And Spacing Per Roof/Ceiling

9.16(A) – Lightweight Roll Paper, Stored-On-End

9.16(B) – Lightweight Roll Paper, Stored-On-Side

9.16(C) – Control Mode Specific Application Sprinklers For Lightweight Roll Paper Storage

9.17(A) – Medium Weight Roll Paper, Stored-On-End, Open/Standard Array, Unbanded

9.17(B) – Medium Weight Roll Paper, Stored-On-End, Open/Standard Array, Banded

9.17(C) – Medium Weight Roll Paper, Stored-On-End, Closed Array, Unbanded/Banded

9.17(D) – Medium Weight/Heavyweight roll Paper, Stored-On-Side, Nested

9.17(E) – Medium Weight/ Heavy weight roll Paper, Stored-On-Side, With Dunnage

9.17(F) – Medium Weight Roll Paper, Stored-On-End, Open/Standard Array, Unbanded

9.17(G) – Medium Weight Roll Paper, Stored-On-End, Open/Standard Array, Banded

9.17(H) – Medium Weight Roll Paper, Stored-On-End, Closed Array, Unbanded/Banded

9.17(I) – Heavyweight Roll Paper, Stored-On-End, Open Array, Unbanded

9.17(J) – Heavyweight Roll Paper, Stored-On-End, Open Array, Banded

9.17(K) – Heavyweight Roll Paper, Stored-On-End, Standard Array, Unbanded

9.17(L) – Heavyweight Roll Paper, Stored-On-End, Standard Array, Banded

9.17(M) – Heavyweight Roll Paper, Stored-On-End, Closed Array, Unbanded/Banded

9.17(N) – Heavyweight Roll Paper, Stored-On-End, Open Array, Unbanded

9.17(O) – Heavyweight Roll Paper, Stored-On-End, Open Array, Banded

9.17(P) – Heavyweight Roll Paper, Stored-On-End, Standard Array, Unbanded

9.17(Q) – Heavyweight Roll Paper, Stored-On-End, Standard Array, Banded

9.17(R) – Control Mode Specific Application Criteria For Medium Weight Paper (Number Of sprinklers At Pressure In kPa)

9.17(S) – Control Mode Specific Application Criteria For Heavyweight Paper (Number Of sprinklers At Pressure In Kpa)

9.17(T) – Protection Of Medium Weight Paper With Suppression Mode Sprinklers (Number of Sprinklers At Pressure In Kpa)

9.17(U) – Protection Of Heavyweight Roll Paper With Suppression Mode Sprinklers(Number Of Sprinklers At Pressure In Kpa)

9.18 – Solid Pile Storage Of Waste Paper And Baled Fibres (Natural And Synthetic)

9.19 – Protection For Hanging Garment Storage On Stationary Pipe Racks

9.20 – Rack And Tube Storage Of Carpets

9.21 – Protection Of On-Floor Idle Pallet Storage Using Standard Sprinklers

9.22 – Control Mode Specific Application Criteria For Group 1 Idle Pallets In Rack Or On floor (Number Of K = 16 Sprinklers At Pressure In Kpa)

9.23(A) – Suppression Mode Sprinklers For Idle Pallet Storage Group 1 Or Group 2 In-Rack and Group 2 On Floor

9.23(B) – Suppression Mode Sprinklers For Idle Pallet Storage Group 1 On Floor

9.24 – Roof/Ceiling Hydraulic Design Requirements

9.25(A) – Palletised Barrel Storage Up To Six Barrels High

9.25(B) – Case Goods Storage – Palletised Or Solid Pile

9.25(C) – Single Row Or Double Row Rack Storage Of Barrels

9.25(D) – Multiple Row Rack Storage Of Barrels

9.26(A) – Control Mode Specific Application Sprinklers For Rack Storage Of Category 1 And 2 Commodities With Open Shelves

9.26(B) – Control Mode Specific Application Sprinklers For Rack Storage Of Category 1 And 2 Commodities With Solid Shelves 2.0 To 6.0 M2

9.26(C) – Control Mode Specific Application Sprinklers For Rack Storage Of Category 1 And 2 Commodities With Solid Shelves Greater Than 6.0 M2

9.26(D) – Control Mode Specific Application Sprinklers For Rack Storage Of Category 3 commodities With Open Shelves

9.26(E) – Control Mode Specific Application Sprinklers For Rack Storage Of Category 3 commodities With Solid Shelves 2.0 To 6.0 M2

9.26(F) – Control Mode Specific Application Sprinklers For Rack Storage Of Category 3 commodities With Solid Shelves Greater Than 6.0 M2

9.26(G) – Control Mode Specific Application Sprinklers For Rack Storage Of Category 4 commodities With Open Shelves

9.26(H) – Control Mode Specific Application Sprinklers For Rack Storage Of Category 4 commodities With Solid Shelves 2.0 To 6.0 M2

9.26(I) – Control Mode Specific Application Sprinklers For Rack Storage Of Category 4 commodities With Solid Shelves Greater Than 6.0 M2

9.26(J) – Control Mode Specific Application Sprinklers For Rack Storage Of Cartoned expanded Plastic And Cartoned Unexpanded Plastic With Open Shelves

9.26(K) – Control Mode Specific Application Sprinklers For Rack Storage Of Cartoned expanded Plastic, Cartoned Unexpanded Plastic And Uncartoned Unexpanded Plastic With Solid shelves 2.0 To 6.0 M2

9.26(L) – Control Mode Specific Application Sprinklers For Rack Storage Of Cartoned expanded Plastic, Cartoned Unexpanded Plastic And Uncartoned Unexpanded Plastic With Solid shelves Greater Than 6.0 M2

9.26(M) – Control Mode Specific Application Sprinklers For Rack Storage Of Uncartoned expanded Plastic And Uncartoned Unexpanded Plastic With Open Shelves

9.26(N) – Control Mode Specific Application Sprinklers For Rack Storage Of Uncartoned expanded Plastic With Solid Shelves 2.0 To 6.0 M2

9.26(O) – Control Mode Specific Application Sprinklers For Rack Storage Of Uncartoned expanded Plastic With Solid Shelves Greater Than 6.0 M2

9.26(P) – Control Mode Specific Application Sprinklers For Solid-Piled, Palletised, Shelf and Bin-Box Storage Of Category 1, 2, 3, And 4 Commodities

9.26(Q) – Control Mode Specific Application Sprinklers For Shelf And Bin-Box Storage Of cartoned And Uncartoned Unexpanded Plastic And Cartoned Expanded Plastic

9.26(R) – Control Mode Specific Application Sprinklers For Solid-Piled And Palletised storage Of Cartoned And Uncartoned Unexpanded Plastic And Cartoned Expanded Plastic

9.26(S) – Control Mode Specific Application Sprinklers For Solid-Piled, Palletised, Shelf and Bin-Box Storage Of Uncartoned Expanded Plastic

9.26(T) – Control Mode Specific Application In-Rack Sprinkler Design Criteria

9.27(A) – Suppression Mode Sprinklers For Rack Storage Of Category 1, 2, 3 And 4commodities And Cartoned, Unexpanded Plastics With Open Shelves

9.27(B) – Suppression Mode Sprinklers For Rack Storage Of Uncartoned Unexpanded plastics With Open Shelves

9.27(C) – Suppression Mode Sprinklers For Rack Storage Of Cartoned Expanded Plastics with Open Shelves

9.27(D) – Suppression Mode Sprinklers For Rack Storage Of Uncartoned Expanded Plastics with Open Shelves

9.27(E) – Suppression Mode Sprinklers For Solid-Piled, Palletised, Shelf And Bin-Box storage Of Category 1, 2, 3 And 4 Commodities And Cartoned Unexpanded Plastics

9.27(F) – Suppression Mode Sprinklers For Solid-Piled, Palletised, Shelf And Bin-Box storage Of Uncartoned Unexpanded Plastics

9.27(G) – Suppression Mode Sprinklers For Solid-Piled, Palletised, Shelf And Bin box storage Of Cartoned, Expanded Plastic

9.27(H) – Suppression Mode Sprinklers For Solid-Piled, Palletised, Shelf And Bin-Box storage Of Uncartoned Expanded Plastics

10.1 – Values Of R For Steel And Chlorinated Pvc Pipes

A1 – Representative List Of Material Categories

B1 – Commodity And Category Examples – Alphabetical Listing

B2 – Commodity And Category Examples – Listed By Category

E1 – Pipes Of 50 Mm And 65 Mm Diameter And 500 L/Min Flow

E2 – Pipes Of 80 Mm To 200 Mm Diameter And 5000 L/Min Flow

H1 – Z-Values And Shortest Major Fault Distances D For New Zealand Locations

K1 – Aerosol Classification

K2 – Chemical Heat Of Combustion For Various Materials

K3 – Chemical Heat Of Combustion Data

R1 – Scope Of Listing

Figure

1.1 – Definition Of Range And Distribution Pipes

1.2 – Typical End-Centre Arrangement

1.3 – Typical End-Side Arrangement

1.4 – Typical Fire Sprinkler System

2.1(A) – Link To Unprotected Building With Eave Height 600 Mm Or Greater

2.1(B) – Link To Unprotected Building With Eave Height Less Than 600 Mm

2.2 – Typical External Sprinklers

2.3 – Permitted Exceptions From Sprinkle ring Of Concealed Spaces

2.4 – Display Of Water Supply Reference Information

3.1 – Typical Tail-End Antifreeze Installation Valves

4.1 – Seismic Flexible Joint

4.2 – Location Of Pipework Bracing

4.3 – Examples Of Load Distribution To Pipework Bracing

4.4 – Pipework Bracing Details

4.5 – Enhanced Safety Valve Set Arrangement406

4.6 – Wet Pipe Control Valve Showing An Acceptable Arrangement For Type ‘X’ Signalling complying With 407.2.2.1

4.7 – Wet Pipe Control Valve Showing An Acceptable Arrangement For Type ‘Y’ Signalling complying With 407.2.2.2

4.8 – Typical Dry Pipe Control Valve Arrangement

4.9 – Storage Height Limitation Sign

5.1 – Positioning Of Sprinkler Heads

5.2 – Spacing Arrangements – Standard And Staggered

5.3 – Sprinkler Distances From Obstructions

5.4 – Position Of Residential Sprinkler Deflector When Located Above The Bottom of A Ceiling Obstruction

5.5 – Sprinkler Positions For Machines In Tiers

5.6 – Location Of Sprinklers In Extraction Ducts

5.7 – Position Of Sprinkler Head To Avoid Suspended Or Floor Mounted Obstruction To sprinkler Discharge (Extended Coverage Or Extra Light Hazard Spray Sprinklers)

5.8 – Examples Of Allowable Extended Spacings For Suppression Mode Sprinklers to Avoid Obstructions

5.9 – Area Where Obstructions Not Allowed

5.10 – Alternative Arrangement For Obstructions No More Than 300 Mm Wide At Ceilings

5.11 – Minimum Clearances To Bar Joists

5.12 – Obstructions Greater Than 20 Mm and Up To 50 Mm Wide Below Sprinklers

5.13 – Obstructions Greater Than 50 Mm and Up To 300 Mm Wide Below Sprinklers

5.14 – Obstructions Greater Than 300 Mm And Up To 600 Mm Wide Below Sprinklers

5.15 – Flat Horizontal Obstructions Greater Than 600 Mm Wide Below Sprinklers

5.16 – Round Or Rectangular Obstructions Less Than 600 Mm Wide Below Sprinklers

5.17 – Round Or Rectangular Obstructions Below Sprinklers Less Than 600 Mm Wide

5.18 – Position Of Deflector When Located Above Bottom Of Ceiling Obstruction

5.19 – Position Of Sprinklers Relative To Obstructions Located Entirely Below

5.20 – Position Of Sprinklers In Relation To Obstructions Located 900 Mm Or More Below deflectors

5.21 – Position Of Sprinklers In Relation To Obstructions Running Parallel To And Directly below Range Pipes

5.22 – Position Of Sprinkler Head To Avoid Obstruction To Sprinkler Discharge (Extended coverage Upright And Pendent Spray Sprinklers)

6.1 – Water Supply Classes – Typical Diagrammatic Layouts

6.2 – Diagrammatic Key To Water Supply Requirements

6.3 – Permissible Supply To Hydrants From Town’s Main Sprinkler Connections –Diagrammatic Layout (Class C1 Supply)

6.4 – Illustrative Example Of Hydrant Allowance (See 604.1.8.2)

6.5 – Typical Arrangement For Boosted Town’s Main Without Pressure Relief Line

6.6 – Typical Arrangement For Boosted Town’s Main With Pressure Relief Line

6.7 – Typical Arrangement For Boosted Town’s Main With Pressure Reducing Valve system

6.8 – Typical Arrangement For Pump And Tank Supply

6.9 – Pump Suction Waterway Fittings

6.10 – Diesel Engine Controller Logic Unit

6.11 – Fsi Standard Requirements

6.12 – Details Of Box Lock

6.13 – Fire Service Inlet Arrangement For Multiple Valve Sets

9.1 – Bundled Tyres (With Horizontal Flue Spaces)

9.2(A) – Double Row Racks – Without Solid Or Slatted Shelves

9.2(B) – Double Row Racks – With Solid Shelves

9.2(C) – Double Row Racks – With Slatted Shelves

9.3 – Typical Double Row (Back-To-Back) Rack Arrangement

9.4 – Fully Loaded (Tyre Storage)

9.5 – Typical Green Tyre Storage (Storage Two Carts High Or 4.9 M High)

9.6(A) – Typical Storage Arrangement– Using Pallet-Based Portable Rack (Fully Loaded)

9.6(B) – Typical Storage Arrangement

9.7 – Typical Storage Arrangements In Locations Other Than Warehouses

9.8(A) – Multiple Row Rack– Drive-In Rack, Two Or More Pallets Deep

9.8(B) – Multiple Row Rack– Flow-Through Racks

9.8(C) – Multiple Row Rack– Double Deep Rack, Serviced By Reach (Forklifts) Truck

9.9(A) – On-Floor Storage– On-Tread Storage

9.9(B) – On-Floor Storage– Pyramid Tyre Storage, On-Side

9.10 – Double Row Rack Storage With On-Side Palletised Storage

9.11 – Rack Frequently Used For On-Tread Storage

9.12 – Typical Pallets

9.13 – Portable Racks

9.14(A) – Rack Storage– Automatic Storage Type Rack

9.14(B) – Rack Storage– Flow-Through Pallet Rack

9.14(C) – Rack Storage– Drive-In Rack, Two Or More Pallets Deep – Forklift Truck Drives Into Rack To Deposit Or Withdraw loads In The Depth Of The Rack

9.14(D) – Rack Storage– Cantilever Rack

9.15 – Portable Rack Using Wood Pallet Base And Steel Frame

9.16 – Examples Of Adjacent Areas With Differing Design Criteria

9.17(A) – Multiple Row Racks Up To 7.6 M High– Only One Level Of In-Rack Sprinklers

9.17(B) – Multiple Row Racks Up To 7.6 M High– More Than One Level Of In-Rack Sprinklers

9.18(A) – Design Examples For Rack Storage On A Non-Solid Floor Structure showing Clear Aisle

9.18(B) – Design Examples For Double Row Rack Storage Under A Non-Solid Floor Structure to Be Considered As One Level Of In-Rack Sprinklers

9.18(C) – Design Examples For Multiple Row Rack Storage Under A Non-Solid Floor structure Under Non-Solid Floor Structure To Be Considered As One Level Of In-Rack Sprinklers

9.19 – Design Example For Rack Storage With Grated, Slatted Or Solid Walkway

9.20 – Design Example For Bin Box And Shelf Storage With Grated, Slatted Or Solid walkway

9.21 – Optional Arrangement For All Categorised Commodities With Clearance Greater than 6.1 M

9.22 – Categorised Commodities Design Decision Tree

9.23(A) – Rack Storage Height Greater Than 7.6 M– Categories 1 To 6: Single Row Rack Without Solid Shelves, Aisle Width Not Less Than 1.2 M And rack Depth Up To 2.7 M

9.23(B) – Rack Storage Height Greater Than 7.6 M– Categories 1 To 5: Double Row Rack Without Solid Shelves, Aisle Width Not Less Than 1.2 M And rack Depth Up To 2.7 M

9.23(C) – Rack Storage Height Greater Than 7.6 M– Categories 1 To 5: Double Row Rack Without Solid Shelves, Aisle Width Not Less Than 1.2 M And rack Depth Greater Than 2.7 M

9.23(D) – Rack Storage Height Greater Than 7.6 M– Categories 1 To 5: Multiple Row Rack Without Solid Shelves Or Single/Double Row Rack Without solid Shelves And Aisle Width Less Than 1.2 M

9.23(E) – Rack Storage Height Greater Than 7.6 M– Category 6: Double Row Rack With Aisle Width Not Less Than 1.2 M

9.23(F) – Rack Storage Height Greater Than 7.6 M– Category 6: Multiple Row Rack Or Single/Double Row Rack And Aisle Width Less Than 1.2 M

9.24(A) – On-Side, Double Row Rack, With Barriers– Irs Horizontal And Vertical Spacing

9.24(B) – On-Side, Double Row Rack, Without Barriers– Irs Horizontal And Vertical Spacing

9.24(C) – On-Side, Multiple Row Rack– Irs Horizontal And Vertical Spacing

9.24(D) – On-Tread, Double Row Rack, With Barriers– Irs Horizontal And Vertical Spacing

9.24(E) – On-Tread, Double Row Rack, Without Barriers– Irs Horizontal And Vertical Spacing

9.24(F) – On-Tread, Multiple Row Rack– Irs Horizontal And Vertical Spacing

9.25 – Roll Paper, Design Decision Tree

9.26 – Protection Of Hanging Garments To 4.6 M High

9.27(A) – Vertical Carousel Elevation

9.27(B) – Vertical Carousel Plan

9.28(A) – Vertical Carousel Elevation

9.28(B) – Vertical Carousel Plan

9.29(A) – Typical Standard Rack For Carpet Storage

9.29(B) – Typical Cubicle Rack For Carpet Storage

9.29(C) – Typical Tube Storage Of Carpets

9.30(A) – In-Rack Sprinkler Arrangement – Single Row Rack

9.30(B) – Typical Horizontal Barrier

9.30(C) – In-Rack Sprinkler Arrangement – Multiple Row Rack

9.31(A) – Multiple Row Racks, Level 2 Aerosols

9.31(B) – Multiple Row Racks, Level 2 Aerosols

9.32 – In-Rack Sprinkler Arrangement, Single Row Racks

9.33(A) – Single Row Racks – Location Of In-Rack Sprinklers, Method A

9.33(B) – Double Row Racks – Location Of In-Rack Sprinklers, Method A

9.33(C) – Double Row Racks – Location Of In-Rack Sprinklers, Method B (Can Also Be applied To Single Row Racks)

9.33(D) – Double Row Racks – Location Of In-Rack Sprinklers, Method C (Can Also Be applied To Single Row Racks)

9.33(E) – Multiple Row Racks – Location Of In-Rack Sprinklers

9.34(A) – Fire Protection Scheme A – Using Single-Row Racks (Option A)

9.34(B) – Fire Protection Scheme A – Using Single-Row Racks (Option B)

9.34(C) – Fire Protection Scheme A – Using Double-Row Racks

9.34(D) – Fire Protection Scheme A – Using Multiple-Row Racks

10.1 – Determination Of Mean Area Per Sprinkler

10.2 – Location And Shape Of Hydraulically “Most Remote” Area Of Operation

11.1 – Typical Form For Notifying That An Installation Is To Be Rendered Inoperative

11.2 – Typical Form For Isolation Tag Card

A1 – Declaration Of Storage Intentions

C1 – Water Supply Flow Graph

K1 – Aerosol Classification

K2(A) – Arrangement Of Barriers Around Dedicated Level 2 Storage Areas. Examples Of storage Areas Defined By Building Walls And Barriers In Racks Near Walls

K2(B) – Arrangement Of Barriers Around Dedicated Level 2 Storage Areas. Examples Of storage Area Defined By Barriers Of Fences Away From Walls (Method 1 And 2)

K2(C) – Provisions For Additional In-Rack Sprinklers Around Dedicated Level 2 Aerosol storage Area

L1 – Example Of A Graphic Symbol To Accompany Warning Signs Prohibiting the Storage Of Aerosols

O1 – Typical Details Of Embankment Supported Membrane Pillow Tank

U1 – Compliance Flowchart For New Systems

U2 – Compliance Flowchart For Biennial Inspections

U3 – Compliance Flowchart For Systems Installed To Other Standards