AS/NZS 2566.1:1998 (R2018) Buried Flexible pipelines. Structural Design
- Abbreviation
- AS/NZS 2566.1:1998
- Amendment
- A1 - incorporated.
- Valid from
- 4/01/1998
- Information provider
- Standards New Zealand,
- Author
- Standards New Zealand, Standards Australia
- Information type
- New Zealand Standard,
- Format
- PDF, HARD COPY,
Description
This Standard sets out a practice for the structural design of buried flexible pipelines which rely primarily upon side support to resist vertical loads without excessive deformation. The interactive pipe/embedment structure is considered only in the transverse direction. Structural performance is predicted in the long-term for pipes in trenches and embankments but not for jacked or bored lines.
Scope
For the purposes of this Standard, the long-term design basis is 50 years, to take account of creep and other time dependent effects. The equations used in this Standard apply to pipes with outside diameters equal to or greater than 75 mm, initial ring-bending stiffness equal to or greater than 1250 N/m/m and long-term ring-bending stiffness equal to or greater than 625 N/m/m.
This Standard provides methods and data for calculating the response of a pipe to loadings from:
- (a) soil;
- (b) superimpositions on the soil; and
- (c) both positive and negative internal pressures.
This resource is cited by:
AS/NZS 2566.1:1998 (R2018) Buried Flexible pipelines. Structural Design
This document is CITED BY:
-
B1/AS1 (Amd 13) (First edition, Amendment 13)
AS/NZS 2566.1:1998 is cited by Acceptable Solution B1/AS1: General from 30/09/2010
-
B1/AS1 (Amd 12) (First edition, Amendment 12)
AS/NZS 2566.1:1998 is cited by Acceptable Solution B1/AS1: General from 30/09/2010
-
B1/AS1 (Amd 11) (First edition, Amendment 11)
AS/NZS 2566.1:1998 is cited by Acceptable Solution B1/AS1: General from 30/09/2010
-
B1/AS1 (Amd 10) (First edition, Amendment 10)
AS/NZS 2566.1:1998 is cited by Acceptable Solution B1/AS1: General from 30/09/2010
-
B1/AS1 (Amd 16) (First edition, Amendment 16)
AS/NZS 2566.1:1998 is cited by Acceptable Solution B1/AS1: General from 30/09/2010
-
B1/AS1 (Amd 14) (First edition, Amendment 14)
AS/NZS 2566.1:1998 is cited by Acceptable Solution B1/AS1: General from 30/09/2010
-
B1/AS1 (Amd 17) (First Edition, Amendment 17)
AS/NZS 2566.1:1998 is cited by Acceptable Solution B1/AS1: General from 30/09/2010
-
B1/AS1 (Amd 18) (First Edition, Amendment 18)
AS/NZS 2566.1:1998 is cited by Acceptable Solution B1/AS1: General from 30/09/2010
-
B1/AS1 (Amd 19) (First edition, Amendment 19)
AS/NZS 2566.1:1998 is cited by Acceptable Solution B1/AS1: General from 30/09/2010
-
B1/AS1 (Amd 15) (First Edition, Amendment 15)
AS/NZS 2566.1:1998 is cited by Acceptable Solution B1/AS1: General from 30/09/2010
-
B1/AS1 (Amd 20) (First edition, Amendment 20)
AS/NZS 2566.1:1998 is cited by Acceptable Solution B1/AS1: General from 30/09/2010
-
B1/AS1 (Amd 21) (First Edition, Amendment 21)
AS/NZS 2566.1:1998 is cited by Acceptable Solution B1/AS1: General from 30/09/2010
-
E1/AS1 (Amd 10) (First Edition, Amendment 10)
AS/NZS 2566.1:1998 is cited by Acceptable Solution E1/AS1: Surface Water from 30/09/2010
-
E1/AS1 (Amd 12) (First Edition, Amendment 12.)
AS/NZS 2566.1:1998 is cited by Acceptable Solution E1/AS1: Surface Water from 30/09/2010
-
E1/AS1 (Amd 11) (First Edition, Amendment 11.)
AS/NZS 2566.1:1998 is cited by Acceptable Solution E1/AS1: Surface Water from 30/09/2010
-
E1/AS1 (Amd 8) (First Edition, Amendment 8)
AS/NZS 2566.1:1998 is cited by Acceptable Solution E1/AS1: Surface Water from 30/09/2010
-
E1/AS1 (Amd 9) (First Edition, Amendment 9)
AS/NZS 2566.1:1998 is cited by Acceptable Solution E1/AS1: Surface Water from 30/09/2010
-
AS 4139-2003
AS/NZS 2566.1:1998 is cited by AS 4139-2003 (R2018) Fibre reinforced concrete pipes and fittings
-
AS/NZS 1260:1999
AS/NZS 2566.1:1998 is cited by AS/NZS 1260:1999 PVC pipes and fittings for drain, waste and vent applications
-
AS/NZS 2033:2008
AS/NZS 2566.1:1998 is cited by AS/NZS 2033:2008 Installation of polyethylene pipe systems
-
AS/NZS 4130:2018
AS/NZS 2566.1:1998 is cited by AS/NZS 4130:2018 Polyethylene (PE) pipes for pressure applications
-
NZS 4541:2007
AS/NZS 2566.1:1998 is cited by NZS 4541:2007 Automatic fire sprinkler systems
This resource cites:
AS/NZS 2566.1:1998 (R2018) Buried Flexible pipelines. Structural Design
This document CITES:
AS/NZS 2566.1:1998 cites AS/NZS 1260:1996 PVC pipes and fittings for drain, waste and vent applications
AS/NZS 2566.1:1998 cites AS/NZS 1477:1996 PVC pipes and fittings for pressure applications
AS/NZS 2566.1:1998 cites AS/NZS 2280:1995 Ductile iron pressure pipes and fittings
AS/NZS 2566.1:1998 cites AS/NZS 2566.1 Supp 1:1998 (R2016) Buried flexible pipelines - Structural design - Commentary (Supplement to AS/NZS 2566.1:1998)
AS/NZS 2566.1:1998 cites AS/NZS 4130:1997 Polyethylene (PE) pipes for pressure applications
AS/NZS 2566.1:1998 cites NZS 4442:1988 Welded steel pipes and fittings for water, sewage and medium pressure gas - SPONSORED
AS/NZS 2566.1:1998 cites NZS 7609.1:1990 Acrylonitrile butadiene styrene (ABS) pipes and fittings for pressure applications - Pipes
AS/NZS 2566.1:1998 cites NZS 7609.2:1990 Acrylonitrile butadiene styrene (ABS) pipes and fittings for pressure applications - Solvent cement fittings
AS/NZS 2566.1:1998 cites AS 1254-1991 Unplasticized PVC (UPVC) pipes and fittings for storm and surface water applications
AS/NZS 2566.1:1998 cites AS 1289.5.1.1-1993 Methods of testing soils for engineering purposes - Soil compaction and density tests - Determination of the dry density/moisture content relation of a soil using standard compactive effort
AS/NZS 2566.1:1998 cites AS 1289.5.3.1-1993 Methods of testing soils for engineering purposes - Soil compaction and density tests - Determination of the field density of a soil - Sand replacement method using a sand-cone pouring apparatus
AS/NZS 2566.1:1998 cites AS 1289.5.4.1-1993 Methods of testing soils for engineering purposes - Soil compaction and density tests - Compaction control test - Dry density ratio, moisture variation and moisture ratio
AS/NZS 2566.1:1998 cites AS 1289.5.8.1-1995 Methods of testing soils for engineering purposes - Soil compaction and density tests - Determination of field density and field moisture content of a soil using a nuclear surface moisture-density gauge - Direct transmission mode
AS/NZS 2566.1:1998 cites AS 1289.6.3.2-1997 (R2013) Methods of testing soils for engineering purposes - Soil strength and consolidation tests - Determination of the penetration resistance of a soil - 9kg dynamic cone penetrometer test
AS/NZS 2566.1:1998 cites AS 1289.E5.1-1977 Methods of testing soil for engineering purposes - - Part E - Soil compaction and density tests - Determination of minimum and maximum dry density of a cohesionless material
AS/NZS 2566.1:1998 cites AS 1289.E6.1-1981 Methods of testing soil for engineering purposes - - Part E - Soil compaction and density tests - Compaction control test - Density index method for a cohesionless material
AS/NZS 2566.1:1998 cites AS 1579-1993 Arc welded steel pipes and fittings for water and waste water
AS/NZS 2566.1:1998 cites AS 1726-1993 Geotechnical site investigations
AS/NZS 2566.1:1998 cites AS 1762-1984 Helical lock-seam corrugated steel pipes - Design and installation
AS/NZS 2566.1:1998 cites AS 2042-1984 Corrugated steel pipes, pipe-arches and arches - Design and installation
AS/NZS 2566.1:1998 cites AS 2758.1-1998 Aggregates and rock for engineering purposes
AS/NZS 2566.1:1998 cites AS 3518.1-1988 Acrylonitrile butadiene styrene (ABS) pipes and fittings for pressure applications - Part 1: Pipes
AS/NZS 2566.1:1998 cites AS 3518.2-1988 Acrylonitrile butadiene styrene (ABS) pipes and fittings for pressure applications - Solvent cement fittings
AS/NZS 2566.1:1998 cites AS 3571-1989 Glass filament reinforced thermosetting plastics (GRP) pipes - Polyester based - Water supply, sewerage and drainage applications
AS/NZS 2566.1:1998 cites AS 3572.10-1989 Plastics - Glass filament reinforced plastics (GRP) - Methods of test - Determination of the initial ring stiffness of glass filament reinforced plastics pipes
AS/NZS 2566.1:1998 cites AS 3572.8-1989 Plastics - Glass filament reinforced plastics (GRP) - Methods of test - Determination of long-term ring stiffness of glass filament reinforced plastics pipes
AS/NZS 2566.1:1998 cites AS 3572.9-1989 Plastics - Glass filament reinforced plastics (GRP) - Methods of test - Determination of pressure regression characteristics as a function of time for glass filament reinforced plastics pipes
AS/NZS 2566.1:1998 cites AS 3703.2-1989 Long-span corrugated steel structures - Design and installation
AS/NZS 2566.1:1998 cites AS 4441(Int)-1996 Oriented PVC (OPVC) pipes for pressure applications
AS/NZS 2566.1:1998 cites Bridge Design Code
AS/NZS 2566.1:1998 cites ISO 9967:1994 Thermoplastics pipes - Determination of creep ratio
AS/NZS 2566.1:1998 cites Soil Engineering