NZS 4251.1:2007 Solid plastering - Cement plaster for walls, ceilings and soffits - SPONSORED
- Information provider
- Standards New Zealand
- Author
- Standards New Zealand
- Information type
- New Zealand Standard
- Format
- PDF, HARD COPY
Description
This Standard sets out the requirements for solid plaster, and stucco over a drained and vented cavity with a rigid or non-rigid backing in buildings to achieve structurally sound, hard, durable and water resistant surfaces.
This revision has introduced the requirement of cavity behind the plaster and applies to exterior and interior walls where impact loads are limited to soft body impacts associated with domestic use.
Scope
It deals with the preparation, mixing and application of cement-based plasters to walls, ceilings and soffits of solid substrates, and exterior stucco on rigid backing and non-rigid backings.
Stucco applications shall apply to buildings within the scope of 1.1.2 of NZS 3604. NZS 4251.1 applies to exterior and interior walls where impact loads are limited to soft-body impacts associated with domestic use.
Gypsum-based plaster and modified or proprietary modified plaster coatings are not included in this Standard.
This resource is cited by:
NZS 4251.1:2007 Solid plastering - Cement plaster for walls, ceilings and soffits - SPONSORED
This document is CITED BY:
-
B1/AS1 (Amd 17) (First Edition, Amendment 17)
NZS 4251.1:2007 is cited by Acceptable Solution B1/AS1: General from 1/08/2011
-
B1/AS1 (Amd 21) (First Edition, Amendment 21)
NZS 4251.1:2007 is cited by Acceptable Solution B1/AS1: General from 1/08/2011
-
B1/AS1 (Amd 20) (First edition, Amendment 20)
NZS 4251.1:2007 is cited by Acceptable Solution B1/AS1: General from 1/08/2011
-
B1/AS1 (Amd 15) (First Edition, Amendment 15)
NZS 4251.1:2007 is cited by Acceptable Solution B1/AS1: General from 1/08/2011
-
B1/AS1 (Amd 19) (First edition, Amendment 19)
NZS 4251.1:2007 is cited by Acceptable Solution B1/AS1: General from 1/08/2011
-
B1/AS1 (Amd 18) (First Edition, Amendment 18)
NZS 4251.1:2007 is cited by Acceptable Solution B1/AS1: General from 1/08/2011
-
B1/AS1 (Amd 16) (First edition, Amendment 16)
NZS 4251.1:2007 is cited by Acceptable Solution B1/AS1: General from 1/08/2011
-
B1/AS1 (Amd 11) (First edition, Amendment 11)
NZS 4251.1:2007 is cited by Acceptable Solution B1/AS1: General from 1/08/2011
-
B1/AS1 (Amd 14) (First edition, Amendment 14)
NZS 4251.1:2007 is cited by Acceptable Solution B1/AS1: General from 1/08/2011
-
B1/AS1 (Amd 13) (First edition, Amendment 13)
NZS 4251.1:2007 is cited by Acceptable Solution B1/AS1: General from 1/08/2011
-
B1/AS1 (Amd 12) (First edition, Amendment 12)
NZS 4251.1:2007 is cited by Acceptable Solution B1/AS1: General from 1/08/2011
-
B2/AS1 (Amd 8) (Second edition, Amendment 8)
NZS 4251.1:2007 is cited by Acceptable Solution B2/AS1: Durability Applications from 30/09/2010
-
B2/AS1 (Amd 12) (Second Edition, Amendment 12)
NZS 4251.1:2007 is cited by Acceptable Solution B2/AS1: Durability Applications from 30/09/2010
-
B2/AS1 (Amd 11) (Second Edition, Amendment 11)
NZS 4251.1:2007 is cited by Acceptable Solution B2/AS1: Durability Applications from 30/09/2010
-
B2/AS1 (Amd 10) (Second Edition, Amendment 10)
NZS 4251.1:2007 is cited by Acceptable Solution B2/AS1: Durability Applications from 30/09/2010
-
B2/AS1 (Amd 9) (Second edition, Amendment 9)
NZS 4251.1:2007 is cited by Acceptable Solution B2/AS1: Durability Applications from 30/09/2010
-
B2/AS1 (Amd 7) (Second edition, Amendment 7)
NZS 4251.1:2007 is cited by Acceptable Solution B2/AS1: Durability Applications from 30/09/2010
-
E2/AS1 (Amd 8) (Third Edition, Amendment 8)
NZS 4251.1:2007 is cited by Acceptable Solution E2/AS1: External Moisture from 1/08/2011
-
E2/AS1 (Amd 5) (Third Edition, Amendment 5)
NZS 4251.1:2007 is cited by Acceptable Solution E2/AS1: External Moisture from 1/08/2011
-
E2/AS1 (Amd 9) (Third Edition, Amendment 9)
NZS 4251.1:2007 is cited by Acceptable Solution E2/AS1: External Moisture from 1/08/2011
-
E2/AS1 (Amd 5, Errata 2) (Third Edition, Amendment 5, Errata 2)
NZS 4251.1:2007 is cited by Acceptable Solution E2/AS1: External Moisture from 1/08/2011
-
E2/AS1 (Amd 6) (Third Edition, Amendment 6)
NZS 4251.1:2007 is cited by Acceptable Solution E2/AS1: External Moisture from 1/08/2011
-
E2/AS1 (Amd 10) (Third Edition, Amendment 10)
NZS 4251.1:2007 is cited by Acceptable Solution E2/AS1: External Moisture from 1/08/2011
-
E2/AS1 (Amd 7) (Third Edition, Amendment 7)
NZS 4251.1:2007 is cited by Acceptable Solution E2/AS1: External Moisture from 1/08/2011
-
CCANZ CP 01:2014
NZS 4251.1:2007 is cited by Code of Practice for Weathertight Concrete and Concrete Masonry Construction
-
CCANZ CP 01:2022
NZS 4251.1:2007 is cited by Code of Practice for Weathertight Concrete and Concrete Masonry Construction
-
NASH Building Envelope Solutions: 2019
NZS 4251.1:2007 is cited by NASH Building Envelope Solutions: 2019 - Light Steel Framed Buildings.
This resource cites:
NZS 4251.1:2007 Solid plastering - Cement plaster for walls, ceilings and soffits - SPONSORED
This document CITES:
New Zealand Standards
-
AS/NZS 1170.0:2002
NZS 4251.1:2007 cites AS/NZS 1170.0:2002 Structural Design Actions - General principles
-
AS/NZS 1170.1:2002
NZS 4251.1:2007 cites AS/NZS 1170.1:2002 (R2016) Structural Design Actions - Permanent, imposed and other actions
-
AS/NZS 1170.2:2002
NZS 4251.1:2007 cites AS/NZS 1170.2:2002 Structural Design Actions - Wind Actions
-
AS/NZS 1170.3:2003 (Reconfirmed in 2016)
NZS 4251.1:2007 cites AS/NZS 1170.3:2003 (R2016) Structural Design Actions - Snow and ice actions
-
AS/NZS 2269:1994
NZS 4251.1:2007 cites AS/NZS 2269:1994 Plywood - Structural
-
AS/NZS 4534:1998
NZS 4251.1:2007 cites AS/NZS 4534:1998 Zinc and zinc/aluminium-alloy coatings on steel wire
-
AS/NZS 4600:2005
NZS 4251.1:2007 cites AS/NZS 4600:2005 Cold-formed steel structures
-
AS/NZS 4680:1999
NZS 4251.1:2007 cites AS/NZS 4680:1999 Hot-dip galvanized (zinc) coatings on fabricated ferrous articles
-
NZS 1170.5:2004 (Excl. A1)
NZS 4251.1:2007 cites NZS 1170.5:2004 (Excl. A1) Structural Design Actions - Part 5: Earthquake design actions - New Zealand - Sponsored.
-
NZS 3103:1991
NZS 4251.1:2007 cites NZS 3103:1991 Specification for sands for mortars and plasters
-
NZS 3109:1997
NZS 4251.1:2007 cites NZS 3109:1997 Concrete construction - SPONSORED
-
NZS 3111:1986
NZS 4251.1:2007 cites NZS 3111:1986 Methods of test for water and aggregate for concrete
-
NZS 3117:1980
NZS 4251.1:2007 cites NZS 3117:1980 (BS 1014:1975) Specification for pigments for Portland cement and Portland cement products
-
NZS 3121:1986
NZS 4251.1:2007 cites NZS 3121:1986 Specification for water and aggregate for concrete
-
NZS 3122:1995
NZS 4251.1:2007 cites NZS 3122:1995 Specification for Portland and blended cements (General and special purpose)
-
NZS 3123:1974
NZS 4251.1:2007 cites NZS 3123:1974 Specification for Portland pozzolan cement (type PP cement)
-
NZS 3125:1991
NZS 4251.1:2007 cites NZS 3125:1991 Specification for portland-limestone filler cement
-
NZS 3602:2003
NZS 4251.1:2007 cites NZS 3602:2003 Timber and wood-based products for use in building - SPONSORED
-
NZS 3604:1999
NZS 4251.1:2007 cites NZS 3604:1999 Timber framed buildings - SPONSORED
-
NZS 3640:2003
NZS 4251.1:2007 cites NZS 3640:2003 Chemical preservation of round and sawn timber - SPONSORED
-
NZS 4210:2001
NZS 4251.1:2007 cites NZS 4210:2001 Code of practice for masonry construction: materials and workmanship - SPONSORED
-
NZS/AS 2908.2:1992
NZS 4251.1:2007 cites NZS/AS 2908.2:1992 Cellulose-cement products - Part 2: Flat sheets
Australian Standards
-
AS 1366.4-1989 (Reconfirmed in 2018)
NZS 4251.1:2007 cites AS 1366.4-1989 (R2018) Rigid cellular plastics sheets for thermal insulation - Rigid cellular polystyrene - extruded (RC/PS-E)
-
AS 1478.1-2000 (Reconfirmed in 2018)
NZS 4251.1:2007 cites AS 1478.1-2000 (R2018) Chemical admixtures for concrete, mortar and grout - Admixtures for concrete
-
AS 1672.1-1997
NZS 4251.1:2007 cites AS 1672.1-1997 (R2016) Limes and limestones - Limes for building
-
AS 2758.1-1998
NZS 4251.1:2007 cites AS 2758.1-1998 Aggregates and rock for engineering purposes
-
AS 3566.1-2002 (R2015)
NZS 4251.1:2007 cites AS 3566.1-2002 (R2015) Self-drilling screws for the building and construction industries - Part 1: General requirements and mechanical properties
-
AS 3566.2-2002
NZS 4251.1:2007 cites AS 3566.2-2002 Self-drilling screws for the building and construction industries. Part 2: Corrosion resistance requirements
-
AS 3730.10-2006
NZS 4251.1:2007 cites AS 3730.10-2006 (R2016) Guide to the properties of paints for buildings. Part 10: Latex - Exterior - Gloss
-
AS 3730.7-2006 (R2016)
NZS 4251.1:2007 cites AS 3730.7-2006 (R2016) Guide to the properties of paints for buildings. Part 7: Latex - Exterior - Flat
-
AS 3730.8-2006 (R2016)
NZS 4251.1:2007 cites AS 3730.8-2006 (R2016) Guide to the properties of paints for buildings. Part 8: Latex - Exterior - Low-gloss
-
AS 3730.9-2006 (R2016)
NZS 4251.1:2007 cites AS 3730.9-2006 (R2016) Guide to the properties of paints for buildings. Part 9: Latex - Exterior - Semi-gloss
Other
-
ASTM C1042-99
NZS 4251.1:2007 cites ASTM C1042-99 Test method for bond strength of latex systems used with concrete by slant shear
-
ASTM C1116-95
NZS 4251.1:2007 cites ASTM C1116-95 Specification for fibre-reinforced concrete and shotcrete
-
ASTM C1152-04e1
NZS 4251.1:2007 cites ASTM C1152-04e1 Standard test method for acid-soluble chloride in mortar and concrete
-
ASTM C631-95a(2004)
NZS 4251.1:2007 cites ASTM C631-95a(2004) Specification for bonding compounds for interior gypsum plastering
-
ASTM C932-80(2005)
NZS 4251.1:2007 cites ASTM C932-80(2005) Specification for surface-applied bonding agents for exterior plastering
-
ASTM C952-91
NZS 4251.1:2007 cites ASTM C952-91 (R1997) Test method for bond strength of mortar to masonry units
-
BS 1881-124:1988
NZS 4251.1:2007 cites BS 1881-124:1988 Testing concrete. Methods for analysis of hardened concrete