AS 3688-2005 Water supply - Metallic fittings and end connectors
- Abbreviation
- AS 3688-2005
- Amendment
- AS 3688-2005/Amdt 1-2006
- Valid from
- 4/08/2005
- Information provider
- Intertek Inform,
- Author
- Standards Australia
- Information type
- Australian Standard,
- Format
- PDF, HARD COPY,
Description
This Standard specifies requirements for metallic body pipe fittings and connectors for use with copper tubes and stainless steel pipes and tubes and adaptor fittings for connection to other pipe materials in water supply and gas systems where the normal working temperature does not exceed 95C, and where the maximum operating pressure does not exceed 1.4 MPa.
Scope
Products designed for a temperature in excess of 95C are included where tested to the appropriate temperature criteria.
NOTES:
- For fittings used for gas applications, see AS 5601.
- Illustrations used in this Standard are diagrammatic only and have been chosen without prejudice.
This resource is cited by:
AS 3688-2005 Water supply - Metallic fittings and end connectors
This document is CITED BY:
-
G10/AS1 (Amd 8) (First Edition, Amendment 8)
AS 3688-2005 is cited by Acceptable Solution G10/AS1: Piped Services from 30/09/2010
-
G10/AS1 (Amd 5) (First Edition, Amendment 5)
AS 3688-2005 is cited by Acceptable Solution G10/AS1: Piped Services from 30/09/2010
-
G10/AS1 (First Edition, Amendment 6)
AS 3688-2005 is cited by Acceptable Solution G10/AS1: Piped Services from 30/09/2010
-
G10/AS1 (First Edition, Amendment 7)
AS 3688-2005 is cited by Acceptable Solution G10/AS1: Piped Services from 30/09/2010
-
AS 1357.1-2009
AS 3688-2005 is cited by AS 1357.1-2009 Valves primarily for use in heated water systems - Part 1: Protection valves
-
AS 1357.2-2005
AS 3688-2005 is cited by AS 1357.2-2005 (2015) Valves primarily for use in heated water systems. Part 2: Control valves
-
AS 4032.1-2005
AS 3688-2005 is cited by AS 4032.1-2005 Water supply - Valves for the control of heated water supply temperatures - Part 1: Thermostatic mixing valves - Materials design and performance requirements
-
AS 4032.2-2005 (R2015)
AS 3688-2005 is cited by AS 4032.2-2005 (R2015) Water supply - Valves for the control of hot water supply temperatures. Part 2: Tempering valves and end-of-line temperature-actuated devices
-
AS 4032.4:2014
AS 3688-2005 is cited by AS 4032.4:2014 Water supply - Valves for the control of heated water supply temperatures. Part 4: Thermostatically controlled taps for the control of heated water supply temperatures
-
AS/NZS 2642.3:2008
AS 3688-2005 is cited by AS/NZS 2642.3:2008 Polybutylene pipe systems - Mechanical jointing fittings for use with polybutylene (PB) pipes for hot and cold water applications
-
AS/NZS 2845.1:2010
AS 3688-2005 is cited by AS/NZS 2845.1:2010 Water supply - Backflow prevention devices - Part 1: Materials, design and performance requirements
-
AS/NZS 3500.1:2015
AS 3688-2005 is cited by AS/NZS 3500.1:2015 Plumbing and drainage - Part 1: Water services
-
AS/NZS 3500.2:2015
AS 3688-2005 is cited by AS/NZS 3500.2:2015 Plumbing and drainage - Part 2: Sanitary plumbing and drainage
-
AS/NZS 3500.4:2015
AS 3688-2005 is cited by AS/NZS 3500.4:2015 Plumbing and drainage - Heated water services
-
AS/NZS 4129:2008
AS 3688-2005 is cited by AS/NZS 4129:2008 Fittings for polyethylene (PE) pipes for pressure applications
-
AS/NZS 5601.1:2010
AS 3688-2005 is cited by AS/NZS 5601.1:2010 Gas installations - Part 1: General installations
-
AS/NZS 5601.1:2013
AS 3688-2005 is cited by AS/NZS 5601.1:2013 Gas installations - General installations
This resource cites:
AS 3688-2005 Water supply - Metallic fittings and end connectors
This document CITES:
AS 3688-2005 cites AS/NZS 1167.1:2005 Welding and brazing - Filler metals - Filler metal for brazing and braze welding
AS 3688-2005 cites AS/NZS 1567:1997 Copper and copper alloys - Wrought rods, bars and sections
AS 3688-2005 cites AS/NZS 1568:1998 Copper and copper alloys - Forging stock and forgings
AS 3688-2005 cites AS/NZS 3500.0:2003 Plumbing and drainage - Glossary of terms
AS 3688-2005 cites AS/NZS 3500.1:2003 Plumbing and drainage - Water services
AS 3688-2005 cites AS/NZS 3500.4:2003 Plumbing and drainage - Part 4: Heated water services
AS 3688-2005 cites AS/NZS 3707:2001 (R2017) Method for testing pressure cycling resistance of pipes and fittings
AS 3688-2005 cites AS/NZS 4020:2002 Testing of products for use in contact with drinking water
AS 3688-2005 cites NZS/BS 1400:1985 Specification for copper alloy ingots and copper alloy and high conductivity copper castings
AS 3688-2005 cites AS 1349-1986 (R2018) Bourdon tube pressure and vacuum gauges
AS 3688-2005 cites AS 1432-2004 (R2016) Copper tubes for plumbing, gasfitting and drainage applications
AS 3688-2005 cites AS 1565-1996 Copper and copper alloys - Ingots and castings
AS 3688-2005 cites AS 1572-1998 (R2018) Copper and copper alloys - Seamless tubes for engineering purposes
AS 3688-2005 cites AS 1646.1-2000 Elastomeric seals for waterworks purposes - General requirements
AS 3688-2005 cites AS 1646.2-2000 Elastomeric seals for waterworks purposes Material requirements for pipe joint seals used in water and wastewater applications - Specifies by prescription formulation
AS 3688-2005 cites AS 1646.3-2000 Elastomeric seals for waterworks purposes - Material requirements for pipe joints seals used in water and wastewater applications with the exception of natural rubber and polyisoprene compounds
AS 3688-2005 cites AS 1722.1-1975 Pipe threads of Whitworth form - Part 1: Sealing pipe threads (metric units)
AS 3688-2005 cites AS 1722.2-1992 (R2017) Pipe threads of Whitworth form - Part 2: Fastening pipe threads
AS 3688-2005 cites AS 1831-2002 Ductile cast iron
AS 3688-2005 cites AS 1834.1-1991 (R2018) Material for soldering - Part 1: Solder alloys
AS 3688-2005 cites AS 2136-1977 (R2018) Method for detecting the susceptibility of copper and its alloys to stress corrosion cracking using the mercurous nitrate test
AS 3688-2005 cites AS 2345-1992 Dezincification resistance of copper alloys
AS 3688-2005 cites AS 2738-2000 (R2018) Copper and copper alloys - Compositions and designations of refinery products, wrought products, ingots and castings
AS 3688-2005 cites AS 2831-1985 Thermometers - Solid stem - Long and short - For precision use
AS 3688-2005 cites AS 5601-2004 Gas installations
AS 3688-2005 cites ASME B36.19M:2004 (R2015) Stainless Steel Pipe
AS 3688-2005 cites ASTM A183-03 Standard Specification for Carbon Steel Track Bolts and Nuts
AS 3688-2005 cites ASTM A269-04 Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service
AS 3688-2005 cites ASTM A313 / A313M - 03 Standard Specification for Stainless Steel Spring Wire
AS 3688-2005 cites ASTM A351/A351M-03 Standard Specification for Castings, Austenitic, Austenitic-Ferritic (Duplex), for Pressure-Containing Parts
AS 3688-2005 cites ASTM A395 / A395M - 99 Standard Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures
AS 3688-2005 cites ASTM A449 - 04b Specification for Hex Cap Screws, Bolts, and Studs, Steel, Heat Treated, 120/105/90 ksi Minimum Tensile Strength, General Use
AS 3688-2005 cites ASTM A536-84(2004) Standard Specification for Ductile Iron Castings
AS 3688-2005 cites ASTM A743 / A743M - 06 Standard Specification for Castings, Iron-Chromium, Iron-Chromium-Nickel, Corrosion Resistant, for General Application
AS 3688-2005 cites ASTM A744 / A744M - 06 Standard Specification for Castings, Iron-Chromium-Nickel, Corrosion Resistant, for Severe Service
AS 3688-2005 cites BS EN 10312:2002 Welded stainless steel tubes for the conveyance of aqueous liquids including water for human consumption. Technical delivery conditions
AS 3688-2005 cites ISO 228-1:2000 Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation
AS 3688-2005 cites ISO 7-1:1994 Dimensions, tolerances and designation