AS/NZS 5601.1:2013 Gas installations - General installations | Building CodeHub

Resource detail

AS/NZS 5601.1:2013 Gas installations - General installations

View on Information Provider website

Abbreviation: AS/NZS 5601.1:2013
Amendment: A1 and A2 - incorporated.
Valid from: 16/09/2013
Replaces: AS/NZS 5601.1:2010,

Information provider: Standards New Zealand
Author: Standards New Zealand, Standards Australia
Information type: New Zealand Standard
Format: PDF

Cited By: This resource is cited by 5 documents (show Citations)
Cites: This resource cites 71 documents (show Citations)

Description

This Standard provides the mandatory requirements and means of compliance for the design, installation and commissioning of gas installations associated with the use or intended use of fuel gases such as natural gas, LP Gas, or biogas.

Gas installations must be undertaken only by persons authorised under the Plumbers, Gasfitters and Drainlayers Act 2006.

Scope

Section 1 of this Standard details the scope and general aspects of a gas installation that contribute to its safety.

Section 2 outlines performance-based design and other essential requirements that must be met to ensure the safety of gas installations.

Sections 3 to 6 specify the means of compliance for installations within the limitations of section 2.

For assistance with locating previous versions, please contact the information provider.

View on Information Provider website

For assistance with locating previous versions, please contact the information provider.

This resource is cited by:

AS/NZS 5601.1:2013 Gas installations - General installations

This document is CITED BY:

G10/AS1 (First Edition, Amendment 8)

AS/NZS 5601.1:2013 is cited by Acceptable Solution G10/AS1: Piped Services from 1/01/2017
G11/AS1 (First Edition, Amendment 6)

AS/NZS 5601.1:2013 is cited by Acceptable Solution G11/AS1: Gas as an Energy Source from 14/02/2014
G4/AS1 (Fourth Edition)

AS/NZS 5601.1:2013 is cited by Acceptable Solution G4/AS1: Ventilation from 1/01/2017
G4/AS1 (Third Edition, Amendment 4)

AS/NZS 5601.1:2013 is cited by Acceptable Solution G4/AS1: Ventilation from 1/01/2017
G10/VM1 (First Edition, Amendment 8)

AS/NZS 5601.1:2013 is cited by Verification Method G10/VM1: Piped Services from 1/01/2017

AS/NZS 5601.1:2013 Gas installations - General installations

Description

This Standard provides the mandatory requirements and means of compliance for the design, installation and commissioning of gas installations associated with the use or intended use of fuel gases such as natural gas, LP Gas, or biogas.

Gas installations must be undertaken only by persons authorised under the Plumbers, Gasfitters and Drainlayers Act 2006.

View on Information Provider website

AS/NZS 5601.1:2013 Gas installations - General installations

Description

This Standard provides the mandatory requirements and means of compliance for the design, installation and commissioning of gas installations associated with the use or intended use of fuel gases such as natural gas, LP Gas, or biogas.

Gas installations must be undertaken only by persons authorised under the Plumbers, Gasfitters and Drainlayers Act 2006.

View on Information Provider website

This resource cites:

AS/NZS 5601.1:2013 Gas installations - General installations

This document CITES:

New Zealand Standards

AS/NZS 1167.1:2005

AS/NZS 5601.1:2013 cites AS/NZS 1167.1:2005 Welding and brazing - Filler metals - Filler metal for brazing and braze welding
AS/NZS 1260:2009

AS/NZS 5601.1:2013 cites AS/NZS 1260:2009 PVC-U Pipes and fittings for drain, waste and vent applications
AS/NZS 1477:2006

AS/NZS 5601.1:2013 cites AS/NZS 1477:2006 PVC pipes and fittings for pressure applications
AS/NZS 1518:2002

AS/NZS 5601.1:2013 cites AS/NZS 1518:2002 (R2016) External extruded high-density-polyethylene coating system for pipes
AS/NZS 1530.3:1999

AS/NZS 5601.1:2013 cites AS/NZS 1530.3:1999 (R2016) Methods for fire tests on building materials, components and structures - Simultaneous determination of ignitability, flame propagation, heat release and smoke release
AS/NZS 1596:2008

AS/NZS 5601.1:2013 cites AS/NZS 1596:2008 The storage and handling of LP Gas
AS/NZS 1734:1997

AS/NZS 5601.1:2013 cites AS/NZS 1734:1997 Aluminium and aluminium alloys - Flat sheet, coiled sheet and plate
AS/NZS 1869:2012

AS/NZS 5601.1:2013 cites AS/NZS 1869:2012 Hose and hose assemblies for liquefied petroleum gases (LP Gas), natural gas and town gas
AS/NZS 2208:1996

AS/NZS 5601.1:2013 cites AS/NZS 2208:1996 Safety glazing materials in buildings
AS/NZS 2492:2007

AS/NZS 5601.1:2013 cites AS/NZS 2492:2007 Cross-linked polyethylene (PE-X) pipes for pressure applications
AS/NZS 2537.5:2011

AS/NZS 5601.1:2013 cites AS/NZS 2537.5:2011 Mechanical jointing fittings for use with crosslinked polyethylene (PE-X) for pressure applications - Part 5: Plastics pipes and fittings - Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels - Metric...
AS/NZS 2648.1:1995

AS/NZS 5601.1:2013 cites AS/NZS 2648.1:1995 Underground marking tape - Non-detectable tape
AS/NZS 2918:2001

AS/NZS 5601.1:2013 cites AS/NZS 2918:2001 Domestic solid fuel burning appliances - Installation
AS/NZS 4129:2008

AS/NZS 5601.1:2013 cites AS/NZS 4129:2008 Fittings for polyethylene (PE) pipes for pressure applications
AS/NZS 4130:2009

AS/NZS 5601.1:2013 cites AS/NZS 4130:2009 Polyethylene (PE) pipes for pressure applications
AS/NZS 4645.1:2008

AS/NZS 5601.1:2013 cites AS/NZS 4645.1:2008 Gas distribution networks - Part 1: Network management
AS/NZS 4645.2:2008

AS/NZS 5601.1:2013 cites AS/NZS 4645.2:2008 Gas distribution networks - Part 2: Steel pipe systems
AS/NZS 4645.3:2008

AS/NZS 5601.1:2013 cites AS/NZS 4645.3:2008 Gas distribution networks - Part 3: Plastics pipe systems
AS/NZS 5263.1.1:2016

AS/NZS 5601.1:2013 cites AS/NZS 5263.1.1:2016 Gas appliances - Part 1.1: Domestic gas cooking appliances
AS/NZS 5263.1.3:2016 Gas appliances - Part 1.3: Gas space heating appliances

AS/NZS 5601.1:2013 cites AS/NZS 5263.1.3:2016 Gas appliances - Part 1.3: Gas space heating appliances
AS/NZS 60079.10.1:2009

AS/NZS 5601.1:2013 cites AS/NZS 60079.10.1:2009 Explosive atmospheres - Part 10.1: Classification of areas - Explosive gas atmospheres
NZS 4219:2009

AS/NZS 5601.1:2013 cites NZS 4219:2009 Seismic performance of engineering systems in buildings
NZS/AS 1530.1:1994 (R2016)

AS/NZS 5601.1:2013 cites NZS/AS 1530.1:1994 (R2016) Methods for fire tests on building materials, components and structures - Part 1: Combustibility test for materials

Australian Standards

AS 1668.2-2012

AS/NZS 5601.1:2013 cites AS 1668.2-2012 The use of ventilation and airconditioning in buildings - Part 2: Mechanical ventilation in buildings
AS 4551-2008

AS/NZS 5601.1:2013 cites AS 4551-2008 Domestic gas cooking appliances
AS 1074-1989

AS/NZS 5601.1:2013 cites AS 1074-1989 (R2018) Steel tubes and tubulars for ordinary service
AS 1210-2010

AS/NZS 5601.1:2013 cites AS 1210-2010 Pressure vessels
AS 1345-1995

AS/NZS 5601.1:2013 cites AS 1345-1995 (R2018) Identification of the contents of pipes, conduits and ducts
AS 1357.1-2009

AS/NZS 5601.1:2013 cites AS 1357.1-2009 Valves primarily for use in heated water systems - Part 1: Protection valves
AS 1397-2011

AS/NZS 5601.1:2013 cites AS 1397-2011 Continuous hot-dip metallic coated steel sheet and strip - Coatings of zinc and zinc alloyed with aluminium and magnesium
AS 1464.1-1984 and AS 1464.2-1984

AS/NZS 5601.1:2013 cites AS 1464.1-1984 and AS 1464.2-1984 Plastics pipes and fittings for gas reticulation - Unplasticized PVC (UPVC) - Part 1: Pipes - Part 2: Fittings
AS 1572-1998

AS/NZS 5601.1:2013 cites AS 1572-1998 (R2018) Copper and copper alloys - Seamless tubes for engineering purposes
AS 2129-2000

AS/NZS 5601.1:2013 cites AS 2129-2000 (R2016) Flanges for pipes valves and fittings
AS 2738-2000

AS/NZS 5601.1:2013 cites AS 2738-2000 (R2018) Copper and copper alloys - Compositions and designations of refinery products, wrought products, ingots and castings
AS 2944.1-2007

AS/NZS 5601.1:2013 cites AS 2944.1-2007 Plastics pipes and fittings for gas reticulation - Part 1: Polyamide pipes
AS 2944.2-2007

AS/NZS 5601.1:2013 cites AS 2944.2-2007 Plastics pipes and fittings for gas reticulation - Part 2: Polyamide fittings
AS 3688-2005

AS/NZS 5601.1:2013 cites AS 3688-2005 Water supply - Metallic fittings and end connectors
AS 3814-2009

AS/NZS 5601.1:2013 cites AS 3814-2009 Industrial and commercial gas-fired appliances
AS 4041-2006

AS/NZS 5601.1:2013 cites AS 4041-2006 (R2016) Pressure piping
AS 4176.8-2010

AS/NZS 5601.1:2013 cites AS 4176.8-2010 Multilayer pipes for pressure applications - Part 8: Multilayer pipe systems for consumer gas installations with a maximum operating pressure up to and including 5 bar (500 kPa) - Specifications for systems (ISO 17484-1:2006, MOD)
AS 4553-2008

AS/NZS 5601.1:2013 cites AS 4553-2008 Gas space heating appliances
AS 4566-2005

AS/NZS 5601.1:2013 cites AS 4566-2005 (R2017) Flue cowls - Gas appliances
AS 4567-2005

AS/NZS 5601.1:2013 cites AS 4567-2005 (R2017) Twin wall metal flues - Gas appliances
AS 4617-2004

AS/NZS 5601.1:2013 cites AS 4617-2004 Manual shut off gas valves
AS 4623-2008 (R2016)

AS/NZS 5601.1:2013 cites AS 4623-2008 (R2016) Jointing compounds and materials for use in gas pipe joints
AS 4627-2005

AS/NZS 5601.1:2013 cites AS 4627-2005 Quick-connect devices for gas
AS 4629-2005

AS/NZS 5601.1:2013 cites AS 4629-2005 (R2018) Automatic shut off valves and vent valves
AS 4631-2005

AS/NZS 5601.1:2013 cites AS 4631-2005 Limited flexibility connectors for gas
AS 5200.053-2008

AS/NZS 5601.1:2013 cites AS 5200.053-2008 Plumbing and drainage products - Part 053: Stainless steel pipes and tubes for pressure applications
AS D26: 1972

AS/NZS 5601.1:2013 cites AS D26-1972 (R2018) Tube fittings with dryseal American standard taper pipe and unified threads for automotive and industrial use
AS ISO 6993.1-2007

AS/NZS 5601.1:2013 cites AS ISO 6993.1-2007 (R2017) Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels - Part 1: Pipes for a maximum operating pressure of 1 bar (100 kPa) (ISO 6993-1:2006, MOD)
AS ISO 6993.3-2007

AS/NZS 5601.1:2013 cites AS ISO 6993.3-2007 (R2017) Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels - Part 3: Fittings and saddles for a maximum operating pressure of 1 bar (100 kPa)
AS ISO 7.1-2008

AS/NZS 5601.1:2013 cites AS ISO 7.1-2008 (R2017) Pipe threads where pressure-tight joints are made on the threads - Dimensions, tolerances and designation

Other

ANSI LC 4-2012/CSA 6.32-2012 (R2016)

AS/NZS 5601.1:2013 cites ANSI LC 4-2012 / CSA 6.32-2012 (R2016) - Press-connect metallic fittings for use in fuel gas distribution systems
ANSI/ASME B1.20.1:1983

AS/NZS 5601.1:2013 cites ANSI/ASME B1.20.1:1983 (R2006) Pipe threads general purpose (Inch)
API SPEC 5L-2007 (44th Edition)

AS/NZS 5601.1:2013 cites API SPEC 5L-2007 Specification for Line Pipe
ASME B16.11:2011

AS/NZS 5601.1:2013 cites ASME B16.11:2011 Forged Fittings, Socket-Welding And Threaded
ASME B16.5:2009

AS/NZS 5601.1:2013 cites ASME B16.5:2009 Pipe Flanges And Flanged Fittings: Nps 1/2 Through Nps 24 Metric/inch Standard
ASME B16.9:2012

AS/NZS 5601.1:2013 cites ASME B16.9:2012 Factory-Made Wrought Buttwelding Fittings
ASME B36.19M:2004

AS/NZS 5601.1:2013 cites ASME B36.19M:2004 (R2015) Stainless Steel Pipe
ASTM A106/A106M - 08

AS/NZS 5601.1:2013 cites ASTM A106/A106M - 08 Standard specification for seamless carbon steel pipe for hightemperature service
ASTM A53/A53M-12

AS/NZS 5601.1:2013 cites ASTM A53/A53M-12 Standard specification for pipe, steel, black and hot-dipped, zinc-coated, welded and seamless
BS EN 10241:2000

AS/NZS 5601.1:2013 cites BS EN 10241:2000 Steel threaded pipe fittings
BS 1640-1:1962

AS/NZS 5601.1:2013 cites BS 1640-1:1962 Specification for steel butt-welding pipe fittings for the petroleum industry - Part 1: Wrought carbon and ferritic alloy steel fittings
BS 1640-3:1968

AS/NZS 5601.1:2013 cites BS 1640-3:1968 Specification for steel butt-welding pipe fittings for the petroleum industry - Part 3: Wrought carbon and ferritic alloy steel fittings. Metric units
BS 3799:1974

AS/NZS 5601.1:2013 cites BS 3799:1974 Specification for steel pipe fittings, screwed and socket-welding for the petroleum industry
BS 7838:1996

AS/NZS 5601.1:2013 cites BS 7838:1996 Specification for corrugated stainless steel semi-rigid pipe and associated fittings for low-pressure gas pipework of up to DN 50
BS 8537:2010

AS/NZS 5601.1:2013 cites BS 8537:2010 Copper and copper alloys. Plumbing fittings. Specification for press ends of plumbing fittings for use with metallic tubes
BS EN 14324:2004

AS/NZS 5601.1:2013 cites BS EN 14324:2004 Brazing. Guidance on the application of brazed joints
BS EN 1759-1:2004

AS/NZS 5601.1:2013 cites BS EN 1759.1:2004 Flanges and their joints. Circular flanges for pipes, valves, fittings and accessories, class-designated. Steel flanges, NPS 1/2 to 24.
ISO 49:1994

AS/NZS 5601.1:2013 cites ISO 49:1994 Malleable cast iron fittings threaded to ISO 7-1

Feedback