NZS 4512:2021 Fire detection and alarm systems in buildings -SPONSORED
- Abbreviation
- NZS 4512:2021
- Valid from
- 14/05/2021
- Replaces
- NZS 4512:2010,
- Information provider
- Standards New Zealand,
- Author
- Standards New Zealand
- Information type
- New Zealand Standard,
Description
This Standard provides a complete specification for the design, manufacture, installation, documentation, and maintenance of building fire detection and alarm systems.
It is intended that this revised and updated standard will continue to be cited by the Acceptable Solutions and Verification Methods for the New Zealand Building Code (NZBC), be used as a baseline for the development of Alternative Solutions, and also to facilitate approval of evacuation procedures and schemes under the Fire and Emergency New Zealand (Fire Safety, Evacuation Procedures, and Evacuation Schemes) Regulations 2018.
This standard is applicable to fire alarm systems in buildings, except for single station or interconnected smoke alarms for houses which are covered in NZS 4514.
Scope
This standard does not specify what type of alarm system or alerting device is required for a particular building.
Instead, based on declared functional requirements determined by the system owner, it provides an integrated set of rules for the correct design, manufacture, installation, commissioning, documentation, and maintenance of the system.
This resource is cited by:
NZS 4512:2021 Fire detection and alarm systems in buildings -SPONSORED
This document is CITED BY:
-
C/AS1 (Second Edition) (Second Edition)
NZS 4512:2021 is cited by Acceptable Solution C/AS1: Protection from fire for buildings with sleeping (residential) and outbuildings (risk group SH) from 2/11/2023
-
C/AS2 (Amd 3) (First Edition, Amendment 3.)
NZS 4512:2021 is cited by Acceptable Solution C/AS2: Buildings other than Risk Group SH from 2/11/2023
-
C/VM2 (Amd 7) (First Edition, Amendment 7)
NZS 4512:2021 is cited by Verification Method C/VM2: Framework for Fire Safety Design from 2/11/2023
-
NZS 4510:2022
NZS 4512:2021 is cited by NZS 4510:2022 Fire hydrant systems - SPONSORED
-
NZS 4514:2021
NZS 4512:2021 is cited by NZS 4514:2021 Interconnected smoke alarms for houses - SPONSORED
This resource cites:
NZS 4512:2021 Fire detection and alarm systems in buildings -SPONSORED
This document CITES:
NZS 4512:2021 cites AS/NZS 1680.1:2006 Interior and workplace lighting - Part 1: General principles and recommendations
NZS 4512:2021 cites AS/NZS 3000:2018 Electrical installations - Known as the Australian/New Zealand Wiring Rules
NZS 4512:2021 cites AS/NZS 3013:2005 Electrical installations - Classification of the fire and mechanical performance of wiring system elements
NZS 4512:2021 cites AS/NZS 3100:2017 Approval and test specification - General requirements for electrical equipment
NZS 4512:2021 cites AS/NZS 4130:2018 Polyethylene (PE) pipes for pressure applications
NZS 4512:2021 cites AS/NZS 5000.2:2006 (R2016) Electric cables - Polymeric insulated - For working voltages up to and including 450/750 V
NZS 4512:2021 cites AS/NZS 5000.3:2003 (R2016) Electric cables - Polymeric insulated - Part 3: Multicore control cables
NZS 4512:2021 cites AS/NZS 62368.1:2018 Audio/video, information and communication technology equipment - Part 1: Safety requirements
NZS 4512:2021 cites AS/NZS ISO/IEC 17020:2013 Conformity assessment - Requirements for the operation of various types of bodies performing inspection
NZS 4512:2021 cites NZS 1170.5:2004 (Excl. A1) Structural Design Actions - Part 5: Earthquake design actions - New Zealand - Sponsored.
NZS 4512:2021 cites NZS 4219:2009 Seismic performance of engineering systems in buildings - SPONSORED
NZS 4512:2021 cites NZS 4510:2008 Fire hydrant systems for buildings - SPONSORED
NZS 4512:2021 cites NZS 4514:2021 Interconnected smoke alarms for houses - SPONSORED
NZS 4512:2021 cites NZS 4515:2009 Fire sprinkler systems for life safety in sleeping occupancies (up to 2000 square metres) - SPONSORED
NZS 4512:2021 cites NZS 4541:2020 Automatic fire sprinkler systems
NZS 4512:2021 cites NZS ISO/IEC 17025:2018 General requirements for the competence of testing and calibration laboratories
NZS 4512:2021 cites AS 1603.1-1997 (R2016) Automatic fire detection and alarm systems - Part 1: Heat detectors
NZS 4512:2021 cites AS 1603.13-1998 (R2016) Automatic fire detection and alarm systems - Heat detectors - Part 13: Duct Sampling units
NZS 4512:2021 cites AS 1603.14-2001 Automatic fire detection and alarm systems - Part 14: Point type carbon monoxide (CO) fire detectors
NZS 4512:2021 cites AS 1603.2-1997 (R2016) Automatic fire detection and alarm systems - Part 2: Point type smoke detectors
NZS 4512:2021 cites AS 1603.7-1996 (R2016) Automatic fire detection and alarm systems - Part 7: Optical beam smoke detectors
NZS 4512:2021 cites AS 1603.8-1996 (R2016) Automatic fire detection and alarm systems. Part 8: Multi-point aspirated smoke detectors
NZS 4512:2021 cites AS 1670.4:2018 Fire detection, warning, control and intercom systems - System design, installation and commissioning Emergency warning and intercom systems
NZS 4512:2021 cites AS 1851-2012 Routine service of fire protection systems and equipment
NZS 4512:2021 cites AS 2220.1-1989 Emergency warning and intercommunication systems in buildings - Part 1: Equipment design and manufacture
NZS 4512:2021 cites AS 4428.16:2020 Fire detection, warning, control and intercom systems - Part 16: Control and indicating equipment Emergency warning control and indicating equipment
NZS 4512:2021 cites AS 4428.4:2016 Fire detection, warning, control and intercom systems - Part 4: Control and indicating equipment Emergency intercom control and indicating equipment
NZS 4512:2021 cites AS 60529-2004 (R2018) Degrees of protection provided by enclosures (IP Code)
NZS 4512:2021 cites AS 7240.2:2018 Fire Detection and Alarm Systems - Part 2: Fire detection control and indicating equipment (ISO 7240-2:2017, MOD)
NZS 4512:2021 cites AS 7240.8-2007 Fire detection and alarm systems - Part 8: Carbon monoxide fire detectors using an electro-chemical cell in combination with a heat sensor
NZS 4512:2021 cites AS ISO 7240.17:2015 Fire detection and fire alarm systems - Part 17: Short-circuit isolators
NZS 4512:2021 cites ASTM B117-09 Standard practice for operating salt spray (fog) apparatus
NZS 4512:2021 cites BS EN 54-10:2002 Fire detection and fire alarm systems - Part 10: Flame detectors - Point detectors
NZS 4512:2021 cites BS EN 54-11:2001 Fire detection and fire alarm systems - Part 11: Manual call points
NZS 4512:2021 cites BS EN 54-12:2015 Fire detection and fire alarm systems - Part 12: Smoke detectors. Line detectors using an optical beam
NZS 4512:2021 cites BS EN 54-17:2005 Fire detection and fire alarm systems - Part 17: Short-circuit isolators
NZS 4512:2021 cites BS EN 54-18:2005 Fire detection and fire alarm systems - Part 18: Input/output devices
NZS 4512:2021 cites BS EN 54-20:2006 Fire detection and fire alarm systems - Part 20: Aspirating smoke detectors
NZS 4512:2021 cites BS EN 54-22:2015+A1:2020 Fire detection and fire alarm systems - Part 22: Resettable line-type heat detectors
NZS 4512:2021 cites BS EN 54-23:2010 Fire detection and fire alarm systems - Part 23: Fire alarm devices. Visual alarm devices
NZS 4512:2021 cites BS EN 54-25:2008 Fire detection and fire alarm systems - Part 25: Components using radio links.
NZS 4512:2021 cites BS EN 54-26:2015 Fire detection and fire alarm systems - Part 26: Carbon monoxide detectors. Point detectors
NZS 4512:2021 cites BS EN 54-27:2015 Fire detection and fire alarms systems - Part 27: Duct smoke detectors
NZS 4512:2021 cites BS EN 54-5:2017+A1:2018 Fire detection and fire alarm systems - Part 5: Heat detectors. Point detectors
NZS 4512:2021 cites BS EN 54-7:2018 Fire detection and fire alarm systems, Smoke detectors - Part 7: Point smoke detectors that operate using scattered light, transmitted light or ionization
NZS 4512:2021 cites BS EN 60068-2-1:2007 Environmental testing - Part 2.1: Tests - Test A: Cold
NZS 4512:2021 cites BS EN 60068-2-2:2007 Environmental testing - Part 2.2: Tests - Test B: Dry heat
NZS 4512:2021 cites BS EN 60068-2-6:2008 Environmental testing - Part 2.6: Tests - Test Fc. Vibration (sinusoidal)
NZS 4512:2021 cites BS EN 60068-2-78:2002 Environmental testing - Part 2.78: Test methods - Test Cab: Damp heat steady state
NZS 4512:2021 cites BS EN 61672-1:2013 Electroacoustics. Sound level meters - Part 1: Specifications
NZS 4512:2021 cites IEC 62599-2:2010 Alarm systems - Part 2: Electromagnetic compatibility - Immunity requirements for components of fire and security alarm systems
NZS 4512:2021 cites ISO 7240-10:2012 Fire detection and alarm systems Part 10: Point-type flame detectors
NZS 4512:2021 cites ISO 7240-11:2011 Fire detection and alarm systems Part 11: Manual call points
NZS 4512:2021 cites ISO 7240-12:2014 Fire detection and alarm systems Part 12: Line type smoke detectors using a transmitted optical beam
NZS 4512:2021 cites ISO 7240-15:2014 Fire detection and alarm systems — Part 15: Point-type fire detectors using smoke and heat sensors
NZS 4512:2021 cites ISO 7240-17:2020 Fire detection and fire alarm systems — Part 17: Transmission path isolators
NZS 4512:2021 cites ISO 7240-18:2017 Fire detection and alarm systems — Part 18: Input/output devices
NZS 4512:2021 cites ISO 7240-20:2010 Fire detection and alarm systems Part 20: Aspirating smoke detectors
NZS 4512:2021 cites ISO 7240-22:2017 Fire detection and alarm systems — Part 22: Smoke-detection equipment for ducts
NZS 4512:2021 cites ISO 7240-23:2013 Fire detection and alarm systems — Part 23: Visual alarm devices
NZS 4512:2021 cites ISO 7240-25:2010 Fire detection and fire alarm systems — Part 25: Components using radio transmission paths
NZS 4512:2021 cites ISO 7240-27:2009 Fire detection and alarm systems Part 27: Point-type fire detectors using a scattered-light, transmitted-light or ionization smoke sensor, an electrochemical-cell carbon-monoxide sensor and a heat sensor
NZS 4512:2021 cites ISO 7240-27:2018 Fire detection and alarm systems — Part 27: Point type fire detectors using a smoke sensor in combination with a carbon monoxide sensor and, optionally, one or more heat sensors
NZS 4512:2021 cites ISO 7240-5:2018 Fire detection and alarm systems Part 5: Point-type heat detectors
NZS 4512:2021 cites ISO 7240-6:2011 Fire detection and alarm systems Part 6: Carbon monoxide fire detectors using electro-chemical cells
NZS 4512:2021 cites ISO 7240-7:2018 Fire detection and alarm systems Part 7: Point-type smoke detectors using scattered light, transmitted light or ionization
NZS 4512:2021 cites ISO 7240-8:2014 Fire detection and alarm systems — Part 8: Point-type fire detectors using a carbon monoxide sensor in combination with a heat sensor
NZS 4512:2021 cites ISO 9001:2015 Quality management systems — Requirements
NZS 4512:2021 cites UL 1971:2002 Safety Signaling Devices for the Hearing Impaired
NZS 4512:2021 cites UL 268:2016 (R2019) UL Standard for Safety Smoke Detectors for Fire Alarm Systems
NZS 4512:2021 cites UL 268A:2008 Safety Smoke Detectors for Duct Application
NZS 4512:2021 cites UL 300 (2019) Standard for Fire Testing of Fire Extinguishing Systems for Protection of Commercial Cooking Equipment
NZS 4512:2021 cites UL 521:1999 Standard for Heat Detectors for Fire Protective Signaling Systems