ISO 7240-15:2014 Fire detection and alarm systems — Part 15: Point-type fire detectors using smoke and heat sensors

Abbreviation
ISO 7240-15:2014
Valid from
23/06/2014

Information provider
Standards New Zealand,
Author
International Organization for Standardization
Information type
ISO Standard,
Format
PDF, HARD COPY,


Description

ISO 7240-15:2014 specifies requirements, test methods, and performance criteria for point-type fire detectors using smoke and heat sensors, incorporating in one mechanical enclosure at least one smoke sensor and at least one other sensor which responds to heat, and in which the signal(s) of the smoke sensor(s) is (are) combined with the signal(s) of the heat sensor(s).

The performance of a single sensor within the detector covered by ISO 7240-15:2014 cannot be sufficient for conformity to other parts of ISO 7240 for the single sensor detector.

Certain types of detectors can contain radioactive materials. The national requirements for radiation protection differ from country to country and they are not therefore specified in this standard. However, such detectors are expected to conform to the national requirements and be in line with the recommendations of the Nuclear Energy Agency (NEA) of the Organization for Economic Co-operation and Development (OECD).

For the testing of other types of detectors, or detectors working on different principles, ISO 7240-15:2014 can be used only for guidance. 

Scope

Detectors with special characteristics, developed for specific risks, are not covered in ISO 7240-15:2014.

For assistance with locating previous versions, please contact the information provider.
View on Information Provider website
For assistance with locating previous versions, please contact the information provider.
This resource is cited by:

ISO 7240-15:2014 Fire detection and alarm systems — Part 15: Point-type fire detectors using smoke and heat sensors

This document is CITED BY:

ISO 7240-15:2014 Fire detection and alarm systems — Part 15: Point-type fire detectors using smoke and heat sensors

Description

ISO 7240-15:2014 specifies requirements, test methods, and performance criteria for point-type fire detectors using smoke and heat sensors, incorporating in one mechanical enclosure at least one smoke sensor and at least one other sensor which responds to heat, and in which the signal(s) of the smoke sensor(s) is (are) combined with the signal(s) of the heat sensor(s).

The performance of a single sensor within the detector covered by ISO 7240-15:2014 cannot be sufficient for conformity to other parts of ISO 7240 for the single sensor detector.

Certain types of detectors can contain radioactive materials. The national requirements for radiation protection differ from country to country and they are not therefore specified in this standard. However, such detectors are expected to conform to the national requirements and be in line with the recommendations of the Nuclear Energy Agency (NEA) of the Organization for Economic Co-operation and Development (OECD).

For the testing of other types of detectors, or detectors working on different principles, ISO 7240-15:2014 can be used only for guidance. 

View on Information Provider website
ISO 7240-15:2014 Fire detection and alarm systems — Part 15: Point-type fire detectors using smoke and heat sensors
Description

ISO 7240-15:2014 specifies requirements, test methods, and performance criteria for point-type fire detectors using smoke and heat sensors, incorporating in one mechanical enclosure at least one smoke sensor and at least one other sensor which responds to heat, and in which the signal(s) of the smoke sensor(s) is (are) combined with the signal(s) of the heat sensor(s).

The performance of a single sensor within the detector covered by ISO 7240-15:2014 cannot be sufficient for conformity to other parts of ISO 7240 for the single sensor detector.

Certain types of detectors can contain radioactive materials. The national requirements for radiation protection differ from country to country and they are not therefore specified in this standard. However, such detectors are expected to conform to the national requirements and be in line with the recommendations of the Nuclear Energy Agency (NEA) of the Organization for Economic Co-operation and Development (OECD).

For the testing of other types of detectors, or detectors working on different principles, ISO 7240-15:2014 can be used only for guidance. 

View on Information Provider website
This resource does not cite any other resources.

ISO 7240-15:2014 Fire detection and alarm systems — Part 15: Point-type fire detectors using smoke and heat sensors

This resource does not CITE any other resources.
Feedback