AS/NZS 3500.4:2018 Plumbing and drainage Part 4: Heated water services
- Abbreviation
- AS/NZS 3500.4:2018
- Amendment
- A1 & A2 - incorporated.
- Valid from
- 29/06/2018
- Replaces
- AS/NZS 3500.4:2015,
- Information provider
- Standards New Zealand,
- Author
- Standards New Zealand, Standards Australia
- Information type
- New Zealand Standard,
- Format
- PDF, HARD COPY,
Description
This Standard sets out requirements for the design, installation and commissioning of heated water services using drinking water or rainwater or a combination thereof. It includes aspects of the installation from, and including, the valve(s) on the cold water inlet to any cold water storage tank or water heater and the downstream fixtures and fittings. It applies to new installations as well as alterations, additions and repairs to existing installations.
This resource is cited by:
AS/NZS 3500.4:2018 Plumbing and drainage Part 4: Heated water services
This document is CITED BY:
-
G12/AS1 (Amd 12) (Third Edition, Amendment 12)
AS/NZS 3500.4:2018 is cited by Acceptable Solution G12/AS1: Water Supplies
-
G12/AS2 (Amd 12) (Third Edition, Amendment 12)
AS/NZS 3500.4:2018 is cited by Acceptable Solution G12/AS2: Solar Water Heaters from 27/06/2019
-
G12/VM1 (Amd 12) (Third Edition, Amendment 12)
AS/NZS 3500.4:2018 is cited by Verification Method G12/VM1: Water Supplies from 27/06/2019
-
AS/NZS 3500.1:2018
AS/NZS 3500.4:2018 is cited by AS/NZS 3500.1:2018 Plumbing and drainage Part 1: Water services
This resource cites:
AS/NZS 3500.4:2018 Plumbing and drainage Part 4: Heated water services
This document CITES:
AS/NZS 3500.4:2018 cites AS/NZS 1167.2:1999 Welding and brazing - Filler metals - Filler metal for welding
AS/NZS 3500.4:2018 cites AS/NZS 1260:2017 PVC-U pipes and fittings for drain, waste and vent applications
AS/NZS 3500.4:2018 cites AS/NZS 1604.2:2012 Specification for preservative treatment - Part 2: Reconstituted wood-based products
AS/NZS 3500.4:2018 cites AS/NZS 1604.3:2012 Specification for preservative treatment - Part 3: Plywood
AS/NZS 3500.4:2018 cites AS/NZS 1604.4:2012 Specification for preservative treatment - Part 4: Laminated veneer lumber (LVL)
AS/NZS 3500.4:2018 cites AS/NZS 1604.5:2012 Specification for preservative treatment - Part 5: Glued laminated timber products
AS/NZS 3500.4:2018 cites AS/NZS 2280:2014 Ductile iron pipes and fittings
AS/NZS 3500.4:2018 cites AS/NZS 2492:2007 Cross-linked polyethylene (PE-X) pipes for pressure applications
AS/NZS 3500.4:2018 cites AS/NZS 2537.1:2011 Mechanical jointing fittings for use with crosslinked polyethylene (PE-X) for pressure applications - Part 1: Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - General...
AS/NZS 3500.4:2018 cites AS/NZS 2537.2:2011 Mechanical jointing fittings for use with crosslinked polyethylene (PE-X) for pressure applications - Part 2: Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Fittings
AS/NZS 3500.4:2018 cites AS/NZS 2537.3:2011 Mechanical jointing fittings for use with crosslinked polyethylene (PE-X) for pressure applications - Part 3: Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Fitness for purpose...
AS/NZS 3500.4:2018 cites AS/NZS 2537.4:2011 Mechanical jointing fittings for use with crosslinked polyethylene (PE-X) for pressure applications -Part 4: Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Guidance for the assessment...
AS/NZS 3500.4:2018 cites AS/NZS 2537.5:2011 Mechanical jointing fittings for use with crosslinked polyethylene (PE-X) for pressure applications - Part 5: Plastics pipes and fittings - Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels - Metric...
AS/NZS 3500.4:2018 cites AS/NZS 2544:1995 Grey iron pressure fittings
AS/NZS 3500.4:2018 cites AS/NZS 2642.2:2008 Polybutylene pipe systems - Polybutylene (PB) pipe for hot and cold water applications
AS/NZS 3500.4:2018 cites AS/NZS 2642.3:2008 Polybutylene pipe systems - Mechanical jointing fittings for use with polybutylene (PB) pipes for hot and cold water applications
AS/NZS 3500.4:2018 cites AS/NZS 2712:2007 Solar and heat pump water heaters - Design and construction
AS/NZS 3500.4:2018 cites AS/NZS 2878:2000 (R2017) Timber - Classification into strength groups
AS/NZS 3500.4:2018 cites AS/NZS 3500.0:2003 Plumbing and drainage - Glossary of terms
AS/NZS 3500.4:2018 cites AS/NZS 3500.1:2018 Plumbing and drainage Part 1: Water services
AS/NZS 3500.4:2018 cites AS/NZS 4020:2018 Testing of products for use in contact with drinking water
AS/NZS 3500.4:2018 cites AS/NZS 4087:2011 Metallic flanges for waterworks purposes
AS/NZS 3500.4:2018 cites AS/NZS 4129:2008 Fittings for polyethylene (PE) pipes for pressure applications
AS/NZS 3500.4:2018 cites AS/NZS 4234:2008 Heated water systems - Calculation of energy consumption
AS/NZS 3500.4:2018 cites AS/NZS 4331.1:1995 (R2016) Metallic flanges - Steel flanges
AS/NZS 3500.4:2018 cites AS/NZS 4331.2:1995 (R2016) Metallic flanges - Cast iron flanges
AS/NZS 3500.4:2018 cites AS/NZS 4331.3:1995 (R2016) Metallic flanges - Copper alloy and composite flanges
AS/NZS 3500.4:2018 cites AS/NZS 4671:2001 Steel reinforcing materials
AS/NZS 3500.4:2018 cites NZS 3109:1997 Concrete construction - SPONSORED
AS/NZS 3500.4:2018 cites NZS 3124:1987 Specification for concrete construction for minor works
AS/NZS 3500.4:2018 cites NZS 3501:1976 Specification for copper tubes for water, gas, and sanitation - SPONSORED
AS/NZS 3500.4:2018 cites NZS 3631:1988 New Zealand timber grading rules - SPONSORED
AS/NZS 3500.4:2018 cites NZS 3631:1988 New Zealand timber grading rules - SPONSORED
AS/NZS 3500.4:2018 cites NZS 3640:2003 Chemical preservation of round and sawn timber - SPONSORED
AS/NZS 3500.4:2018 cites NZS 4603:1985 Installation of low pressure thermal storage electric water heaters with copper cylinders (open vented systems) - SPONSORED
AS/NZS 3500.4:2018 cites NZS 4607:1989 Installation of thermal storage electric water heaters: valve vented systems - SPONSORED
AS/NZS 3500.4:2018 cites NZS 4613:1986 Domestic solar water heaters - SPONSORED
AS/NZS 3500.4:2018 cites NZS 4614:1986 Installation of domestic solar water heating systems - SPONSORED
AS/NZS 3500.4:2018 cites NZS 5807:1980 Code of practice for industrial identification by colour, wording or other coding - SPONSORED
AS/NZS 3500.4:2018 cites NZS/BS 21:1985 Specification for pipe threads for tubes and fittings where pressure-tight joints are made on the threads (metric dimensions)
AS/NZS 3500.4:2018 cites NZS/BS 3601:1987 Specification for carbon steel pipes and tubes with specified room temperature properties for pressure purposes
AS/NZS 3500.4:2018 cites AS 1074-1989 (R2018) Steel tubes and tubulars for ordinary service
AS/NZS 3500.4:2018 cites AS 1345-1995 (R2018) Identification of the contents of pipes, conduits and ducts
AS/NZS 3500.4:2018 cites AS 1379-2007 (R2017) Specification and supply of concrete
AS/NZS 3500.4:2018 cites AS 1397-2011 Continuous hot-dip metallic coated steel sheet and strip - Coatings of zinc and zinc alloyed with aluminium and magnesium
AS/NZS 3500.4:2018 cites AS 1432-2004 (R2016) Copper tubes for plumbing, gasfitting and drainage applications
AS/NZS 3500.4:2018 cites AS 1478.1-2000 (R2018) Chemical admixtures for concrete, mortar and grout - Admixtures for concrete
AS/NZS 3500.4:2018 cites AS 1604.1-2012 Specification for preservative treatment - Part 1: Sawn and round timber
AS/NZS 3500.4:2018 cites AS 1646-2007 (R2018) Elastomeric seals for waterworks purposes
AS/NZS 3500.4:2018 cites AS 1910-2004 (R2016) Water supply - Float control valves for use in hot and cold water
AS/NZS 3500.4:2018 cites AS 2129-2000 (R2016) Flanges for pipes valves and fittings
AS/NZS 3500.4:2018 cites AS 3498-2009 Authorization requirements for plumbing products - Water heaters and hot-water storage tanks
AS/NZS 3500.4:2018 cites AS 3600-2018 Concrete structures
AS/NZS 3500.4:2018 cites AS 3688:2016 Water supply and gas systems - Metallic fittings and end connectors
AS/NZS 3500.4:2018 cites AS 3795-1996 Copper alloy tubes for plumbing and drainage applications
AS/NZS 3500.4:2018 cites AS 4032.1-2005 Water supply - Valves for the control of heated water supply temperatures - Part 1: Thermostatic mixing valves - Materials design and performance requirements
AS/NZS 3500.4:2018 cites AS 4032.2-2005 (R2015) Water supply - Valves for the control of hot water supply temperatures. Part 2: Tempering valves and end-of-line temperature-actuated devices
AS/NZS 3500.4:2018 cites AS 4032.4:2014 Water supply - Valves for the control of heated water supply temperatures. Part 4: Thermostatically controlled taps for the control of heated water supply temperatures
AS/NZS 3500.4:2018 cites AS 4176.1-2010 Multilayer pipes for pressure applications - Part 1: Multilayer piping systems for hot and cold water plumbing applications - General (ISO 21003-1:2008, MOD)
AS/NZS 3500.4:2018 cites AS 4176.2-2010 Multilayer pipes for pressure applications - Part 2: Multilayer piping systems for hot and cold water plumbing applications - Pipes (ISO 21003-2:2008, MOD)
AS/NZS 3500.4:2018 cites AS 4176.3-2010 Multilayer pipes for pressure applications - Part 3: Multilayer piping systems for hot and cold water plumbing applications - Fittings (ISO 21003-3:2008, MOD)
AS/NZS 3500.4:2018 cites AS 4176.5-2010 Multilayer pipes for pressure applications - Part 5: Multilayer piping systems for hot and cold water plumbing applications - Fitness for purpose of the system (ISO 21003-5:2008, MOD)
AS/NZS 3500.4:2018 cites AS 4176.7-2010 Multilayer pipes for pressure applications - Part 7: Multilayer piping systems for hot and cold water plumbing applications - Assessment of conformity (ISO/TS 21003-7:2008, MOD)
AS/NZS 3500.4:2018 cites AS 4809:2017 Copper pipe and fittings - Installation and commissioning
AS/NZS 3500.4:2018 cites AS 5082.1-2007 (R2017) Polybutylene (PB) plumbing pipe systems - Metric series Metric polybutylene (PB) pipes for hot and cold water applications
AS/NZS 3500.4:2018 cites AS 5082.2-2007 (R2017) Polybutylene (PB) plumbing pipe systems - Metric series Mechanical and fusion jointing systems
AS/NZS 3500.4:2018 cites AS 5200.053-2008 Plumbing and drainage products - Part 053: Stainless steel pipes and tubes for pressure applications
AS/NZS 3500.4:2018 cites AS ISO 7.1-2008 (R2017) Pipe threads where pressure-tight joints are made on the threads - Dimensions, tolerances and designation
AS/NZS 3500.4:2018 cites ASTM D2846 / D2846M - 17be1 Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Hot- and Cold-Water Distribution Systems
AS/NZS 3500.4:2018 cites BS EN ISO 1167-1:2006 Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 1: General method
AS/NZS 3500.4:2018 cites ISO 15874-2:2013 (2017) Preview Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 2: Pipes
AS/NZS 3500.4:2018 cites ISO 15874-3:2013 (R2017) Preview Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 3: Fittings
AS/NZS 3500.4:2018 cites NCC 2016 - National Construction Code of Australia - Complete Series
AS/NZS 3500.4:2018 cites Building Code Clause G1 - Personal hygiene
AS/NZS 3500.4:2018 cites Building Code Clause G12 - Water Supplies