AS/NZS 2327:2017 Composite structures - Composite steel-concrete construction in buildings
- Abbreviation
- AS/NZS 2327:2017
- Amendment
- A1 - 26/06/2020 - incorporated.
- Valid from
- 20/12/2017
- Information provider
- Standards New Zealand
- Author
- Standards Australia, Standards New Zealand
- Information type
- New Zealand Standard
- Format
- PDF, HARD COPY
Description
This Standard sets out minimum requirements for the design, detailing and construction of composite steel-concrete members (beams, columns, slabs, joints) in buildings.
The Standard is to be used by structural engineers when designing steel framed building structures.
Scope
This Standard does not cover the design of composite beams and columns where the elements of the steel section are less than 3 mm thick or the value of the yield stress (fy) assumed in design exceeds 690 MPa.
It also does not cover composite beams and columns where the concrete characteristic compressive strength at 28 days is outside the range of 20 MPa to 100 MPa.
This resource is cited by:
AS/NZS 2327:2017 Composite structures - Composite steel-concrete construction in buildings
This document is CITED BY:
-
B1/VM1 (Amd 17) (First Edition, Amendment 17)
AS/NZS 2327:2017 is cited by Verification Method B1/VM1: Structure - General from 30/11/2018
-
B1/VM1 (Amd 18) (First Edition, Amendment 18)
AS/NZS 2327:2017 is cited by Verification Method B1/VM1: Structure - General from 30/11/2018
-
B1/VM1 (Amd 19) (First edition, Amendment 19)
AS/NZS 2327:2017 is cited by Verification Method B1/VM1: Structure - General from 30/11/2018
-
B1/VM1 (Amd 20) (First edition, Amendment 20)
AS/NZS 2327:2017 is cited by Verification Method B1/VM1: Structure - General from 30/11/2018
-
B1/VM1 (Amd 21) (First Edition, Amendment 21)
AS/NZS 2327:2017 is cited by Verification Method B1/VM1: Structure - General from 30/11/2018
This resource cites:
AS/NZS 2327:2017 Composite structures - Composite steel-concrete construction in buildings
This document CITES:
New Zealand Standards
-
AS/NZS 1163:2016
AS/NZS 2327:2017 cites AS/NZS 1163:2016 Cold-formed structural steel hollow sections
-
AS/NZS 1170.0:2002
AS/NZS 2327:2017 cites AS/NZS 1170.0:2002 Structural Design Actions - General principles
-
AS/NZS 1170.1:2002
AS/NZS 2327:2017 cites AS/NZS 1170.1:2002 (R2016) Structural Design Actions - Permanent, imposed and other actions
-
AS/NZS 1170.2:2011
AS/NZS 2327:2017 cites AS/NZS 1170.2:2011 (R2016) Structural Design Actions - Wind Actions
-
AS/NZS 1170.3:2003 (Reconfirmed in 2016)
AS/NZS 2327:2017 cites AS/NZS 1170.3:2003 (R2016) Structural Design Actions - Snow and ice actions
-
AS/NZS 1252.1:2016
AS/NZS 2327:2017 cites AS/NZS 1252.1:2016 High-strength steel fastener assemblies for structural engineering - Bolts, nuts and washers - Part 1: Technical requirements
-
AS/NZS 1252.2:2016
AS/NZS 2327:2017 cites AS/NZS 1252.2:2016 High-strength steel fastener assemblies for structural engineering - Bolts, nuts and washers - Part 2: Verification testing for bolt assemblies
-
AS/NZS 1365:1996
AS/NZS 2327:2017 cites AS/NZS 1365:1996 (R2016) Tolerances for flat-rolled steel products
-
AS/NZS 1554.1:2014
AS/NZS 2327:2017 cites AS/NZS 1554.1:2014 Structural steel welding - Part 1: Welding of steel structures
-
AS/NZS 1554.2:2003
AS/NZS 2327:2017 cites AS/NZS 1554.2:2003 Structural steel welding - Stud welding (steel studs to steel)
-
AS/NZS 1554.4:2014
AS/NZS 2327:2017 cites AS/NZS 1554.4:2014 Structural steel welding - Welding of high strength quenched and tempered steels
-
AS/NZS 1594:2002
AS/NZS 2327:2017 cites AS/NZS 1594:2002 (R2016) Hot-rolled steel flat products
-
AS/NZS 2425:2015
AS/NZS 2327:2017 cites AS/NZS 2425:2015 Bar chairs in reinforced concrete - Product requirements and test methods
-
AS/NZS 3678:2016
AS/NZS 2327:2017 cites AS/NZS 3678:2016 Structural steel - Hot-rolled plates, floorplates and slabs
-
AS/NZS 3679.1:2016
AS/NZS 2327:2017 cites AS/NZS 3679.1:2016 Structural steel - Part 1: Hot-rolled bars and sections
-
AS/NZS 3679.2:2016
AS/NZS 2327:2017 cites AS/NZS 3679.2:2016 Structural steel - Part 2: Welded I-sections
-
AS/NZS 4600:2005
AS/NZS 2327:2017 cites AS/NZS 4600:2005 Cold-formed steel structures
-
AS/NZS 4671:2001
AS/NZS 2327:2017 cites AS/NZS 4671:2001 Steel reinforcing materials
-
AS/NZS 5100.6:2017
AS/NZS 2327:2017 cites AS/NZS 5100.6:2017 Bridge design - Part 6: Steel and composite construction
-
NZS 1170.5:2004 (Excl. A1)
AS/NZS 2327:2017 cites NZS 1170.5:2004 (Excl. A1) Structural Design Actions - Part 5: Earthquake design actions - New Zealand - Sponsored.
-
NZS 3101.1:2006 (inc A1, A2, A3)
AS/NZS 2327:2017 cites NZS 3101.1:2006 (inc A1, A2, A3) Concrete structures standard. - Part 1: The design of concrete structures. - SPONSORED.
-
NZS 3101.2:2006 (inc A1, A2, A3)
AS/NZS 2327:2017 cites NZS 3101.2:2006 (inc A1, A2, A3) Concrete structures standard. - Part 2: Commentary on the design of concrete structures. - SPONSORED.
-
NZS 3104:2003
AS/NZS 2327:2017 cites NZS 3104:2003 Specification for concrete production
-
NZS 3404 Parts 1 and 2:1997
AS/NZS 2327:2017 cites NZS 3404 Parts 1 and 2:1997 Steel structures standard - SPONSORED
Australian Standards
-
AS 1012.12.1-1998 (R2014) (Reconfirmed 24/10/2014)
AS/NZS 2327:2017 cites AS 1012.12.1-1998 (R2014) Methods of testing concrete. Method 12: Determination of mass per unit volume of hardened concrete - Part 1: Rapid measuring method
-
AS 1012.12.2-1998 (R2014) (Reconfirmed 09-09-2014)
AS/NZS 2327:2017 cites AS 1012.12.2-1998 (R2014) Methods of testing concrete. Method 12: Determination of mass per unit volume of hardened concrete - Part 2: Water displacement method
-
AS 1110.1-2015
AS/NZS 2327:2017 cites AS 1110.1-2015 ISO metric hexagon bolts and screws - Product grades A and B - Part 1: Bolts
-
AS 1110.2-2015
AS/NZS 2327:2017 cites AS 1110.2-2015 ISO metric hexagon bolts and screws - Product grades A and B - Part 2: Screws
-
AS 1111.1:2015
AS/NZS 2327:2017 cites AS 1111.1:2015 ISO metric hexagon bolts and screws - Product grade C - Bolts
-
AS 1111.2-2015
AS/NZS 2327:2017 cites AS 1111.2-2015 ISO metric hexagon bolts and screws - Product grade C - Screws
-
AS 1112.1-2015
AS/NZS 2327:2017 cites AS 1112.1-2015 ISO metric hexagon nuts - Part 1: Style 1 - Product grades A and B
-
AS 1112.2-2015
AS/NZS 2327:2017 cites AS 1112.2-2015 ISO metric hexagon nuts - Part 2: Style 2 - Product grades A and B
-
AS 1112.3:2015
AS/NZS 2327:2017 cites AS 1112.3:2015 ISO metric hexagon nuts
-
AS 1112.4-2015
AS/NZS 2327:2017 cites AS 1112.4-2015 ISO metric hexagon nuts - Part 4: Chamfered thin nuts - Product grades A and B
-
AS 1163-1991
AS/NZS 2327:2017 cites AS 1163-1991 Structural steel hollow sections
-
AS 1170.4-2007
AS/NZS 2327:2017 cites AS 1170.4-2007 (R2018) Structural design actions Part 4: Earthquake actions in Australia
-
AS 1275-1985
AS/NZS 2327:2017 cites AS 1275-1985 (R2017) Metric screw threads for fasteners
-
AS 1379-2007
AS/NZS 2327:2017 cites AS 1379-2007 (R2017) Specification and supply of concrete
-
AS 1397-2011
AS/NZS 2327:2017 cites AS 1397-2011 Continuous hot-dip metallic coated steel sheet and strip - Coatings of zinc and zinc alloyed with aluminium and magnesium
-
AS 1530.4:2014
AS/NZS 2327:2017 cites AS 1530.4:2014 Methods for fire tests on building materials, components and structures. Part 4: Fire-resistance tests for elements of construction
-
AS 1579-2001
AS/NZS 2327:2017 cites AS 1579-2001 (R2018) Arc welded steel pipes and fittings for water and waste water
-
AS 2327.1-2003
AS/NZS 2327:2017 cites AS 2327.1-2003 Composite structures. Simply supported beams
-
AS 3597-2008
AS/NZS 2327:2017 cites AS 3597-2008 Structural and pressure vessel steel - Quenched and tempered plate
-
AS 3600-2009
AS/NZS 2327:2017 cites AS 3600-2009 Concrete structures
-
AS 3610 SUPP 2-1996 (Commentary (Supplement to AS 3610-1995))
AS/NZS 2327:2017 cites AS 3610 SUPP 2-1996 Formwork for concrete - Commentary (Supplement to AS 3610-1995)
-
AS 3610-1995
AS/NZS 2327:2017 cites AS 3610-1995 Formwork for concrete
Other
-
BS EN 1365-1:2012
AS/NZS 2327:2017 cites BS EN 1365-1:2012 Fire Resistance Tests for Loadbearing Elements - Part 1: Walls
-
BS EN 1365-2:2014
AS/NZS 2327:2017 cites BS EN 1365-2:2014 Fire Resistance Tests for Loadbearing Elements - Part 2: Floors and Roofs
-
BS EN 1365-3:2000
AS/NZS 2327:2017 cites BS EN 1365-3:2000 Fire Resistance Tests for Loadbearing Elements - Part 3: Beams
-
BS EN 1365-4:1999
AS/NZS 2327:2017 cites BS EN 1365-4:1999 Fire Resistance Tests for Loadbearing Elements - Part 4: Columns
-
ISO 13918:2008
AS/NZS 2327:2017 cites ISO 13918:2008 Welding -- Studs and ceramic ferrules for arc stud welding
-
ISO 3183:2012
AS/NZS 2327:2017 cites ISO 3183:2012 Petroleum and natural gas industries -- Steel pipe for pipeline transportation systems