BS EN 115-1:2008 Safety of escalators and moving walks Part 1: Construction and installation
- Abbreviation
- BS EN 115-1:2008
- Amendment
- A1: 2010
- Valid from
- 31/05/2010
- Information provider
- Standards New Zealand
- Author
- European Standardization Organisations, British Standards Institution
- Information type
- European Standard
- Format
Description
EN 115-1 defines safety requirements for escalators and moving walks in order to safeguard people and objects against risks of accidents during installation, operation, maintenance and inspection work.
Scope
EN 115-1 applies to new escalators and moving walks (pallet or belt type) and deals with all significant hazards, hazardous situations and events relevant to escalators and moving walks when they are used as intended and under conditions of misuse which are reasonably foreseeable.
It does not deal with hazards arising from seismic activities and is not applicable to escalators and moving walks which were manufactured before the date of its publication as EN. It is, however, recommended that existing installations be adapted to this Standard.
This resource is cited by:
BS EN 115-1:2008 Safety of escalators and moving walks Part 1: Construction and installation
This document is CITED BY:
-
D2/AS3 (Second Edition, Amendment 6)
BS EN 115-1:2008 is cited by Acceptable Solution D2/AS3: Escalators and Moving Walks from 14/02/2014
-
D2/AS3 (Second Edition, Amendment 7)
BS EN 115-1:2008 is cited by Acceptable Solution D2/AS3: Escalators and Moving Walks from 14/02/2014
This resource cites:
BS EN 115-1:2008 Safety of escalators and moving walks Part 1: Construction and installation
This document CITES:
Other
-
BS EN 10025-1:2004
BS EN 115-1:2008 cites BS EN 10025-1:2004 Hot rolled products of structural steels. Part 1: General technical delivery conditions
-
BS EN 10025-2:2004
BS EN 115-1:2008 cites BS EN 10025-2:2004 Hot rolled products of structural steels. Part 2: Technical delivery conditions for non-alloy structural steels
-
BS EN 10025-3:2004
BS EN 115-1:2008 cites BS EN 10025-3:2004 Hot rolled products of structural steels. Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels
-
BS EN 10025-4:2004
BS EN 115-1:2008 cites BS EN 10025-4:2004 Hot rolled products of structural steels. Part 4: Technical delivery conditions for thermomechanical rolled weldable fine grain structural steels
-
BS EN 10025-5:2004
BS EN 115-1:2008 cites BS EN 10025-5:2004 Hot rolled products of structural steels. Part 5: Technical delivery conditons for structural steels with improved atmospheric corrosion resistance
-
BS EN 10025-6:2004
BS EN 115-1:2008 cites BS EN 10025-6:2004 +A1:2009 Hot rolled products of structural steels. Part 6: Technical delivery conditons for plates and wide flats of high yield strength structural steels in the quenched and tempered condition
-
BS EN 10083-1:2006
BS EN 115-1:2008 cites BS EN 10083-1:2006 Steels for quenching and tempering - Part 1: General technical delivery conditions
-
BS EN 10083-2:2006
BS EN 115-1:2008 cites BS EN 10083-2:2006 Steels for quenching and tempering - Part 2: Technical delivery conditions for non alloy steels
-
BS EN 10083-3:2006
BS EN 115-1:2008 cites BS EN 10083-3:2006 Steels for quenching and tempering - Part 3: Technical delivery conditions for alloy steels
-
BS EN 12015:2004
BS EN 115-1:2008 cites BS EN 12015:2004 Electromagnetic compatibility. Product family standard for lifts, escalators and moving walks. Emission
-
BS EN 12016:2004 +A1:2008
BS EN 115-1:2008 cites BS EN 12016:2004 +A1:2008 Electromagnetic compatibility. Product family standard for lifts, escalators and moving walks. Immunity
-
BS EN 13015:2001 +A1:2008
BS EN 115-1:2008 cites BS EN 13015:2001 +A1:2008 Maintenance for lifts and escalators. Rules for maintenance instructions
-
BS EN 13501-1:2007
BS EN 115-1:2008 cites BS EN 13501-1:2007 Fire classification of construction products and building elements - Classification using test data from reaction to fire tests
-
BS EN 1929-2:2004
BS EN 115-1:2008 cites BS EN 1929-2:2004 Basket trolleys - Part 2: Requirements, tests and inspection for basket trolleys with or without a child carrying facility, intended to be used on passenger conveyors
-
BS EN 1929-4:2005
BS EN 115-1:2008 cites BS EN 1929-4:2005 Basket trolleys - Part 4: Requirements and tests for basket trolleys with additional goods carrying facility(ies), with or without a child carrying facility, intended to be used on passenger conveyors
-
BS EN 1993-1-1:2005
BS EN 115-1:2008 cites BS EN 1993-1-1:2005 Eurocode 3: Design Of Steel Structures - Part 1-1: General Rules And Rules For Buildings
-
HD 21 PT4:1990
BS EN 115-1:2008 cites HD 21 PT4:1990 Polyvinyl Chloride Insulated Cables Of Rated Voltages Up To And Including 450/750 V - Part 4: Sheathed Cables For Fixed Wiring
-
HD 21 PT5:2001
BS EN 115-1:2008 cites HD 21 PT5:2001 Polyvinyl Chloride Insulated Cables Of Rated Voltages Up To And Including 450/750 V - Part 5: Flexible Cables (Cords)
-
HD 22-4:2004
BS EN 115-1:2008 cites HD 22-4:2004 Cables Of Rated Voltages Up To And Including 450/750 V And Having Cross-linked Insulation - Part 4: Cords And Flexible Cables
-
HD 60364-4-41:2007
BS EN 115-1:2008 cites HD 60364-4-41:2007 Low-voltage Electrical Installations - Part 4-41: Protection For Safety - Protection Against Electric Shock
-
IEC 60068-2-14:1984+AMD1:1986
BS EN 115-1:2008 cites IEC 60068-2-14:1984 +AMD1:1986 Environmental testing - Part 2: Tests. Test N: Change of temperature
-
IEC 60068-2-27:2008
BS EN 115-1:2008 cites IEC 60068-2-27:2008 Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock
-
IEC 60068-2-29:1987
BS EN 115-1:2008 cites IEC 60068-2-29:1987 Environmental testing. Part 2: Tests. Test Eb and guidance: Bump
-
IEC 60068-2-6:1995
BS EN 115-1:2008 cites IEC 60068-2-6:1995 - Environmental testing - Part 2: Tests - Test Fc: Vibration (sinusoidal)
-
IEC 60204-1:2005
BS EN 115-1:2008 cites IEC 60204-1:2005 Safety of machinery - Electrical equipment of machines - Part 1: General requirements
-
IEC 60227-3:1993+AMD1:1997 CSV
BS EN 115-1:2008 cites IEC 60227-3:1993+AMD1:1997 CSV Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 3: Non-sheathed cables for fixed wiring
-
IEC 60269-1 Ed. 4.0 b(2006) (Ed. 4.0 b(2006))
BS EN 115-1:2008 cites IEC 60269-1 Ed. 4.0 b(2006) Low-voltage fuses - Part 1: General requirements
-
IEC 60439-1:1999
BS EN 115-1:2008 cites IEC 60439-1:1999 Low-voltage switchgear and controlgear assemblies - Part 1: Type-tested and partially type-tested assemblies
-
IEC 60529:1989
BS EN 115-1:2008 cites IEC 60529:1989 Degrees of protection provided by enclosures (IP Code)
-
IEC 60664-1 Ed. 2.0 b (2007) (2007)
BS EN 115-1:2008 cites IEC 60664-1 Ed. 2.0 b (2007) Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests
-
IEC 60747-5-5 Ed. 1.0 b (2007) (1.0 b (2007))
BS EN 115-1:2008 cites IEC 60747-5-5 Ed. 1.0 b (2007) Semiconductor devices - Discrete devices - Part 5-5: Optoelectronic devices - Photocouplers
-
IEC 60947-4-1:2000
BS EN 115-1:2008 cites IEC 60947-4-1:2000 Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters
-
IEC 60947-5-1:2003
BS EN 115-1:2008 cites IEC 60947-5-1:2003 Low-voltage switchgear and controlgear - Part 5-1: Control circuit devices and switching elements - Electromechanical control circuit devices
-
IEC 61249-2-10:2003
BS EN 115-1:2008 cites IEC 61249-2-10:2003 Materials for printed boards and other interconnecting structures - Part 2-10: Reinforced base materials clad and unclad - Cyanate ester, brominated epoxide, modified or unmodified, woven E-glass reinforced laminated sheets of define
-
IEC 61249-2-11:2003 (Edition 1.0)
BS EN 115-1:2008 cites IEC 61249-2-11:2003 Materials for printed boards and other interconnecting structures - Part 2-11: Reinforced base materials, clad and unclad - Polyimide, brominated epoxide modified or unmodified, woven E-glass reinforced laminated sheets of defined fl
-
IEC 61249-2-12:1999
BS EN 115-1:2008 cites IEC 61249-2-12:1999 Materials for printed boards and other interconnecting structures - Part 2-12: Sectional specification set for reinforced base materials, clad and unclad - Epoxide non-woven aramid laminate of defined flammability, copper-clad
-
IEC 61249-2-13:1999
BS EN 115-1:2008 cites IEC 61249-2-13:1999 Materials for printed boards and other interconnecting structures - Part 2-13: Sectional specification set for reinforced base materials, clad and unclad - Cyanate ester non-woven aramid laminate of defined flammability, copper-clad
-
IEC 61249-2-18:2002
BS EN 115-1:2008 cites IEC 61249-2-18:2002 Materials for printed boards and other interconnecting structures - Part 2-18: Reinforced base materials, clad and unclad - Polyester non-woven fibreglass reinforced laminated sheet of defined flammability (vertical burning test), co
-
IEC 61249-2-19:2001
BS EN 115-1:2008 cites IEC 61249-2-19:2001 Materials for printed boards and other interconnecting structures - Part 2-19: Reinforced base materials, clad and unclad - Epoxide cross-plied linear fibreglass-reinforced laminated sheets of defined flammability (vertical burning tes
-
IEC 61249-2-1:2005
BS EN 115-1:2008 cites IEC 61249-2-1:2005 Materials for printed boards and other interconnecting structures - Part 2-1: Reinforced base materials, clad and unclad - Phenolic cellulose paper reinforced laminated sheets, economic grade, copper clad
-
IEC 61249-2-21:2003
BS EN 115-1:2008 cites IEC 61249-2-21:2003 Materials for printed boards and other interconnecting structures - Part 2-21: Reinforced base materials, clad and unclad - Non-halogenated epoxide woven E-glass reinforced laminated sheets of defined flammability (vertical burning tes
-
IEC 61249-2-22:2005
BS EN 115-1:2008 cites IEC 61249-2-22:2005 Materials for printed boards and other interconnecting structures - Part 2-22: Reinforced base materials clad and unclad - Modified non-halogenated epoxide woven E-glass laminated sheets of defined flammability (vertical burning test
-
IEC 61249-2-23:2005
BS EN 115-1:2008 cites IEC 61249-2-23:2005 Materials for printed boards and other interconnecting structures - Part 2-23: Reinforced base materials, clad and unclad - Non-halogenated phenolic cellulose paper reinforced laminated sheets, economic grade, copper clad
-
IEC 61249-2-26:2005
BS EN 115-1:2008 cites IEC 61249-2-26:2005 Materials for printed boards and other interconnecting structures - Part 2-26: Reinforced base materials clad and unclad - Non-halogenated epoxide non-woven/woven E-glass reinforced laminated sheets of defined flammability (vertical
-
IEC 61249-2-2:2005
BS EN 115-1:2008 cites IEC 61249-2-2:2005 Materials for printed boards and other interconnecting structures - Part 2-2: Reinforced base materials, clad and unclad - Phenolic cellulose paper reinforced laminated sheets, high electrical grade, copper-clad
-
IEC 61249-2-4:2001 (Edition 1.0)
BS EN 115-1:2008 cites IEC 61249-2-4:2001 Materials for printed boards and other interconnecting structures - Part 2-4: Reinforced base materials, clad and unclad - Polyester non-woven/woven fibreglass laminated sheet of defined flammability (vertical burning test), copper-cl
-
IEC 61249-2-5:2003
BS EN 115-1:2008 cites IEC 61249-2-5:2003 Materials for printed boards and other interconnecting structures - Part 2-5: Reinforced base materials, clad and unclad - Brominated epoxide cellulose paper reinforced core/woven E-glass reinforced surfaces laminated sheets of defined
-
IEC 61249-2-6:2003
BS EN 115-1:2008 cites IEC 61249-2-6:2003 Materials for printed boards and other interconnecting structures - Part 2-6: Reinforced base materials, clad and unclad - Brominated epoxide non-woven/woven E-glass reinforced laminated sheets of defined flammability, copper-clad
-
IEC 61249-2-7:2002 (Edition 1.0)
BS EN 115-1:2008 cites IEC 61249-2-7:2002 Materials for printed boards and other interconnecting structures - Part 2-7: Reinforced base materials clad and unclad - Epoxide woven E-glass laminated sheet of defined flammability (vertical burning test), copper-clad
-
IEC 61249-2-8:2003
BS EN 115-1:2008 cites IEC 61249-2-8:2003 Materials for printed boards and other interconnecting structures - Part 2-8: Reinforced base materials clad and unclad - Modified brominated epoxide woven fibreglass reinforced laminated sheets of defined flammability (vertical burni
-
IEC 61249-2-9:2003
BS EN 115-1:2008 cites IEC 61249-2-9:2003 Materials for printed boards and other interconnecting structures - Part 2-9: Reinforced base materials, clad and unclad - Bismaleimide/triazine modified epoxide or unmodified, woven E-glass reinforced laminated sheets of defined flam
-
IEC 61249-3-3:1999 (Edition 1.0)
BS EN 115-1:2008 cites IEC 61249-3-3:1999 Materials for printed boards and other interconnecting structures. Part 3-3: Sectional specification set for unreinforced base materials, clad and unclad (intended for flexible printed boards) - Adhesive coated flexible polyester fil
-
IEC 61249-3-4:1999
BS EN 115-1:2008 cites IEC 61249-3-4:1999 Materials for printed boards and other interconnecting structures - Part 3-4: Sectional specification set for unreinforced base materials, clad and unclad (intended for flexible printed boards) - Adhesive coated flexible polyimide film
-
IEC 61249-3-5:1999
BS EN 115-1:2008 cites IEC 61249-3-5:1999 Materials for printed boards and other interconnecting structures - Part 3-5: Sectional specification set for unreinforced base materials, clad and unclad (intended for flexible printed boards) - Transfer adhesive films
-
IEC 61249-4-11:2005
BS EN 115-1:2008 cites IEC 61249-4-11:2005 Materials for printed boards and other interconnecting structures - Part 4-11: Sectional specification set for prepreg materials, unclad - Non-halogenated epoxide, woven E-glass prepreg of defined flammability
-
IEC 61249-4-12:2005 (Edition 1.0)
BS EN 115-1:2008 cites IEC 61249-4-12:2005 Materials for printed boards and other interconnecting structures - Part 4-12: Sectional specification set for prepreg materials, unclad - Non-halogenated multifunctional epoxide woven E-glass prepreg of defined flammability
-
IEC 61249-4-1:2008 (Edition 1.0)
BS EN 115-1:2008 cites IEC 61249-4-1:2008 Materials for printed boards and other interconnecting structures - Part 4-1: Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) - Epoxide woven E-glass prepreg of defined flammability
-
IEC 61249-4-2:2005
BS EN 115-1:2008 cites IEC 61249-4-2:2005 Materials for printed boards and other interconnecting structures - Part 4-2: Sectional specification set for prepreg materials, unclad - Multifunctional epoxide woven E-glass prepreg of defined flammability
-
IEC 61249-4-5:2005
BS EN 115-1:2008 cites IEC 61249-4-5:2005 Materials for printed boards and other interconnecting structures - Part 4-5: Sectional specification set for prepreg materials, unclad - Polyimide, modified or unmodified, woven E-glass prepreg of defined flammability
-
IEC 61249-5-1:1995 (Edition 1.0)
BS EN 115-1:2008 cites IEC 61249-5-1:1995 Materials for interconnection structures - Part 5: Sectional specification set for conductive foils and films with and without coatings - Section 1: Copper foils (for the manufacture of copper-clad base materials)
-
IEC 61249-5-4:1996
BS EN 115-1:2008 cites IEC 61249-5-4:1996 Materials for interconnection structures - Part 5: Sectional specification set for conductive foils and films with or without coatings - Section 4: Conductive inks
-
IEC 61249-7-1:1995
BS EN 115-1:2008 cites IEC 61249-7-1:1995 Materials for interconnection structures - Part 7: Sectional specification set for restraining core materials - Section 1: Copper/invar/copper
-
IEC 61249-8-7:1996
BS EN 115-1:2008 cites IEC 61249-8-7:1996 Materials for interconnection structures - Part 8: Sectional specification set for non-conductive films and coatings - Section 7: Marking legend inks
-
IEC 61249-8-8:1997
BS EN 115-1:2008 cites IEC 61249-8-8:1997 Materials for interconnection structures - Part 8: Sectional specification set for non-conductive films and coatings - Section 8: Temporary polymer coatings
-
IEC 61558-1:2005
BS EN 115-1:2008 cites IEC 61558-1:2005 Safety of power transformers, power supplies, reactors and similar products - Part 1: General requirements and tests
-
IEC 62061:2005
BS EN 115-1:2008 cites IEC 62061:2005 Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems
-
IEC 62326-1 Ed. 2.0 b (2002) (Edition 2.0 b (2002))
BS EN 115-1:2008 cites IEC 62326-1 Ed. 2.0 b (2002) Printed boards - Part 1: Generic specification
-
ISO 12100-1:2003
BS EN 115-1:2008 cites ISO 12100-1:2003 Safety of machinery - Basic concepts, general principles for design - Part 1: Basic terminology, methodology
-
ISO 12100-2:2003
BS EN 115-1:2008 cites ISO 12100-2:2003 Safety of machinery - Basic concepts, general principles for design - Part 2: Technical principles
-
ISO 13850:2006
BS EN 115-1:2008 cites ISO 13850:2006 Safety of machinery - Emergency stop - Principles for design
-
ISO 13857:2008
BS EN 115-1:2008 cites ISO 13857:2008 Safety Of Machinery - Safety Distances To Prevent Hazard Zones Being Reached By Upper And Lower Limbs
-
ISO 3864-1:2002
BS EN 115-1:2008 cites ISO 3864-1:2002 Graphical Symbols - Safety colours and safety signs - Design principles for safety signs in workplaces and public areas
-
ISO 3864-3:2006
BS EN 115-1:2008 cites ISO 3864-3:2006 Graphical symbols - Safety colours and safety signs - Part 3: Design principles for graphical symbols for use in safety signs