SNZ TS 3404:2018 Durability requirements for steel structures and components
- Abbreviation
- SNZ TS 3404:2018
- Valid from
- 22/02/2018
- Information provider
- Standards New Zealand
- Author
- Standards New Zealand
- Information type
- New Zealand Standard
- Format
Description
This Standard covers the corrosion protection of structural steelwork exposed to New Zealand atmospheric and non-atmospheric environments.
Asset owners, engineers, architects, contractors, specifiers of corrosion protection systems, and the surface coating industry can use this technical specification, which provides an advanced framework for specifying the durability requirements for steel structures and components in atmospheric and in non-atmospheric environments, and will enable durability requirements to be met without over-specification or under-specification of coating systems.
The technical specification updates the information contained in section 5 of NZS 3404.1:2009 and is republished as a stand-alone technical specification.
It is a simplification of the design procedure for durability determination given in Heavy Engineering and Research Association Report R4-133:2011 New Zealand Steelwork Corrosion and Coatings Guide, and is intended to be used to ensure that structural steelwork is sufficiently durable to meet the requirements of the NZ Building Code Clause B2, the New Zealand Transport Agency (NZTA) Bridge manual, the NZTA Protective coatings for steel bridges, as well as remain compatible with NZS 3404:1997.
The technical specification should be used together with AS/NZS 2312.1:2014 and AS/NZS 2312.2:2014. As the fabrication and erection provisions of NZS 3404.
This resource is cited by:
SNZ TS 3404:2018 Durability requirements for steel structures and components
This document is CITED BY:
-
B2/AS1 (Amd 11) (Second Edition, Amendment 11)
SNZ TS 3404:2018 is cited by Acceptable Solution B2/AS1: Durability Applications from 30/11/2018
-
B2/AS1 (Amd 10) (Second Edition, Amendment 10)
SNZ TS 3404:2018 is cited by Acceptable Solution B2/AS1: Durability Applications from 30/11/2018
-
B2/AS1 (Amd 12) (Second Edition, Amendment 12)
SNZ TS 3404:2018 is cited by Acceptable Solution B2/AS1: Durability Applications from 30/11/2018
-
B1/VM1 (Amd 17) (First Edition, Amendment 17)
SNZ TS 3404:2018 is cited by Verification Method B1/VM1: Structure - General from 30/11/2018
-
B1/VM1 (Amd 19) (First edition, Amendment 19)
SNZ TS 3404:2018 is cited by Verification Method B1/VM1: Structure - General from 30/11/2018
-
B1/VM1 (Amd 18) (First Edition, Amendment 18)
SNZ TS 3404:2018 is cited by Verification Method B1/VM1: Structure - General from 30/11/2018
This resource cites:
SNZ TS 3404:2018 Durability requirements for steel structures and components
This document CITES:
New Zealand Standards
-
AS/NZS 2041.1:2011
SNZ TS 3404:2018 cites AS/NZS 2041.1:2011 Buried corrugated metal structures - Part 1: Design methods
-
AS/NZS 2310:2002
SNZ TS 3404:2018 cites AS/NZS 2310:2002 (R2016) Glossary of paint and painting terms
-
AS/NZS 2312.1:2014
SNZ TS 3404:2018 cites AS/NZS 2312.1:2014 Guide to the protection of structural steel against atmospheric corrosion by the use of protective coatings - Part 1: Paint coatings
-
AS/NZS 2312.2:2014
SNZ TS 3404:2018 cites AS/NZS 2312.2:2014 Guide to the protection of structural steel against atmospheric corrosion by the use of protective coatings - Part 2: Hot dip galvanizing
-
AS/NZS 2312:2002
SNZ TS 3404:2018 cites AS/NZS 2312:2002 Guide to the protection of structural steel against atmospheric corrosion by the use of protective coatings
-
AS/NZS 3750.15:1998
SNZ TS 3404:2018 cites AS/NZS 3750.15:1998 (R2013) Paints for steel structures - Part 15: Inorganic zinc silicate paint
-
AS/NZS 3750.9:2009
SNZ TS 3404:2018 cites AS/NZS 3750.9:2009 (R2019) Paints for steel structures - Part 9: Organic zinc-rich primer
-
AS/NZS 4534:2006
SNZ TS 3404:2018 cites AS/NZS 4534:2006 (R2017) Zinc and zinc/aluminium-alloy coatings on steel wire
-
AS/NZS 4680:2006
SNZ TS 3404:2018 cites AS/NZS 4680:2006 (R2017) Hot-dip galvanised (zinc) coatings on fabricated ferrous articles
-
AS/NZS 4792:2006
SNZ TS 3404:2018 cites AS/NZS 4792:2006 (R2017) Hot-dip galvanized (zinc) coatings on ferrous hollow sections, applied by a continuous or a specialized process
-
AS/NZS 5100.6:2017
SNZ TS 3404:2018 cites AS/NZS 5100.6:2017 Bridge design - Part 6: Steel and composite construction
-
AS/NZS 5131:2016
SNZ TS 3404:2018 cites AS/NZS 5131:2016 Structural steelwork - Fabrication and erection
Australian Standards
-
AS 1397-2011
SNZ TS 3404:2018 cites AS 1397-2011 Continuous hot-dip metallic coated steel sheet and strip - Coatings of zinc and zinc alloyed with aluminium and magnesium
-
AS 1627.4-2005
SNZ TS 3404:2018 cites AS 1627.4-2005 (R2017) Metal finishing - Preparation and pretreatment of surfaces - Abrasive blast cleaning of steel
-
AS 2159-2009
SNZ TS 3404:2018 cites AS 2159-2009 Piling - Design and installation
-
AS 2832.4-2006
SNZ TS 3404:2018 cites AS 2832.4-2006 (R2016) Cathodic protection of metals. Internal surfaces
-
AS 3894.3-2002 (R2013)
SNZ TS 3404:2018 cites AS 3894.3-2002 (R2013) Site testing of protective coatings - Method 3: Determination of dry film thickness
Other
-
2002 No 17
SNZ TS 3404:2018 cites Chartered Professional Engineers of New Zealand Act 2002
-
2005 No 38
SNZ TS 3404:2018 cites Registered Architects Act 2005
-
AAMA 2604-13
SNZ TS 3404:2018 cites AAMA 2604-13 Voluntary Specification, Performance Requirements and Test Procedures for High Performance Organic Coatings on Aluminum Extrusions and Panels (with Coil Coating Appendix)
-
ASTM D2244:2016
SNZ TS 3404:2018 cites ASTM D2244:2016 Practice for calculation of color tolerances and color differences from instrumentally measured color coordinates
-
ASTM D4214:2007
SNZ TS 3404:2018 cites ASTM D4214:2007 (R2015) Test Methods for avaluating the degree of chalking of exterior paint films
-
Bridge Manual (SP/M/022)
SNZ TS 3404:2018 cites Bridge Manual (SP/M/022) Second Edition - 2003
-
HERA Report R4-133 (2011)
SNZ TS 3404:2018 cites HERA Report R4-133 (2011) - New Zealand steelwork corrosion and coatings guide
-
ISO 8501-1:2007
SNZ TS 3404:2018 cites ISO 8501-1:2007 Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings
-
ISO 9223:2012
SNZ TS 3404:2018 cites ISO 9223:2012 Corrosion of metals and alloys - Corrosivity of atmospheres - Classification, determination and estimation
-
ISO 9224:2012
SNZ TS 3404:2018 cites ISO 9224:2012 Corrosion of metals and alloys — Corrosivity of atmospheres — Guiding values for the corrosivity categories
-
Protective coatings for steel bridges
SNZ TS 3404:2018 cites Protective coatings for steel bridges