AS/NZS 2699.2:2000 Built-in components for masonry construction - Connectors and accessories
- Information provider
- Standards New Zealand,
- Author
- Standards New Zealand, Standards Australia
- Information type
- New Zealand Standard,
- Format
- PDF, HARD COPY,
Description
This Standards specifies performance requirements covering corrosion resistance and tests for structural serviceability, for connectors and accessories built into masonry.
Scope
This Standard specifies performance requirements for connectors and accessories built into masonry, including
- (a) masonry anchors;
- (b) masonry connectors;
- (c) masonry ties other than wall ties;
- (d) tie-downs in masonry;
- (e) bolts and fixings in masonry;
- (f) bed-joint mesh in masonry; and
- (g) all accessories for masonry construction other than
- (i) wall ties that are covered by AS/NZS 2699.1;
- (ii) damp-proof courses and flashings that are covered by AS/NZS 2904;
- (iii) termite protection that is covered by AS 3660; and
- (iv) lintels and shelf angles that are covered by AS/NZS 2699.3.
The requirements for connectors and accessories specified in this Standard cover (A) durability materials specifications and test methods; and (B) structural test methods only.
Because of the wide variety of connectors and accessories and their diverse applications, it is not possible to provide specifications for structural performance parameters; however, test methods for these parameters are given for the guidance of manufacturers, designers and purchasers. This Standard applies to connectors and accessories used in masonry described in AS 3700, NZS 4210, NZS 4230.1 and NZS 4230.2.
This resource is cited by:
AS/NZS 2699.2:2000 Built-in components for masonry construction - Connectors and accessories
This document is CITED BY:
-
AS/NZS 2699.1:2000
AS/NZS 2699.2:2000 is cited by AS/NZS 2699.1:2000 Built-in components for masonry construction - Wall ties
-
NZS 3604:1999
AS/NZS 2699.2:2000 is cited by NZS 3604:1999 Timber framed buildings - SPONSORED
-
NZS 3604:2011
AS/NZS 2699.2:2000 is cited by NZS 3604:2011 Timber-framed buildings - SPONSORED
-
NZS 4230:2004
AS/NZS 2699.2:2000 is cited by NZS 4230:2004 Design of reinforced concrete masonry structures - SPONSORED
-
SH/AS1 (First edition, unamended)
AS/NZS 2699.2:2000 is cited by Simple House - Acceptable Solution Revoked
This resource cites:
AS/NZS 2699.2:2000 Built-in components for masonry construction - Connectors and accessories
This document CITES:
AS/NZS 2699.2:2000 cites AS/NZS 1580.481.1.10:1998 (R2013) Methods of test for paints and related materials - Exposed to weathering - Degree of flaking and peeling
AS/NZS 2699.2:2000 cites AS/NZS 1580.481.1.9:1998 (R2013) Methods of test for paints and related materials - Exposed to weathering - Degree of blistering
AS/NZS 2699.2:2000 cites AS/NZS 2312:1994 Guide to the protection of iron and steel against exterior atmospheric corrosion
AS/NZS 2699.2:2000 cites AS/NZS 2699.1:2000 Built-in components for masonry construction - Wall ties
AS/NZS 2699.2:2000 cites AS/NZS 2699.3:2000 Built-in components for masonry construction - Part 3: Lintels and shelf angles (durability requirements)
AS/NZS 2699.2:2000 cites AS/NZS 2904:1995 (R2013) Damp-proof courses and flashings
AS/NZS 2699.2:2000 cites AS/NZS 4455:1997 Masonry units and segmental pavers
AS/NZS 2699.2:2000 cites AS/NZS 4534:1998 Zinc and zinc/aluminium-alloy coatings on steel wire
AS/NZS 2699.2:2000 cites AS/NZS 4680:1999 Hot-dip galvanized (zinc) coatings on fabricated ferrous articles
AS/NZS 2699.2:2000 cites NZS 3604:1999 Timber framed buildings - SPONSORED
AS/NZS 2699.2:2000 cites NZS 4203:1992 General structural design and design loadings for buildings - SPONSORED
AS/NZS 2699.2:2000 cites AS 1170.2-1989 Minimum design loads on structures (known as the SAA Loading Code) - Wind loads
AS/NZS 2699.2:2000 cites AS 1199-1988 Sampling procedures and tables for inspection by attributes
AS/NZS 2699.2:2000 cites AS 1397-1993 Steel sheet and strip - Hot-dipped zinc-coated or aluminium/zinc-coated
AS/NZS 2699.2:2000 cites AS 1399-1990 Guide to AS 1199 - Sampling procedures and tables for inspection by attributes
AS/NZS 2699.2:2000 cites AS 1449-1994 Wrought alloy steels - Stainless and heat-resisting steel plate, sheet and strip
AS/NZS 2699.2:2000 cites AS 2193-1978 Methods for calibration and grading of force-measuring systems of testing machines
AS/NZS 2699.2:2000 cites AS 2331.2.1-1980 Methods of test for metallic and related coatings - Average thickness tests - Dissolution methods - Strip and weigh, and analytical
AS/NZS 2699.2:2000 cites AS 3700-1988 Masonry structures (known as the SAA Masonry Code)
AS/NZS 2699.2:2000 cites AS 3942-1993 Quality control - Variables charts - Guide