AS/NZS 2642.1:2007 Polybutylene pipe systems - Polybutylene (PB) pipe extrusion compounds
- Abbreviation
- AS/NZS 2642.1:2007
- Amendment
- A1 - incorporated
- Valid from
- 17/04/2007
- Information provider
- Standards New Zealand
- Author
- Standards New Zealand, Standards Australia
- Information type
- New Zealand Standard
- Format
- PDF, HARD COPY
Description
This Standard specifies requirements for polybutylene extrusion compounds suitable for making polybutylene pipe for hot and cold water applications.
This resource is cited by:
AS/NZS 2642.1:2007 Polybutylene pipe systems - Polybutylene (PB) pipe extrusion compounds
This document is CITED BY:
-
G12/AS1 (Third Edition, Amendment 10)
AS/NZS 2642.1:2007 is cited by Acceptable Solution G12/AS1: Water Supplies from 10/10/2011
-
G12/AS1 (Third Edition, Amendment 9)
AS/NZS 2642.1:2007 is cited by Acceptable Solution G12/AS1: Water Supplies from 10/10/2011
-
G12/AS1 (Third Edition, Amendment 8)
AS/NZS 2642.1:2007 is cited by Acceptable Solution G12/AS1: Water Supplies from 10/10/2011
-
G12/AS1 (Third Edition, Amendment 11)
AS/NZS 2642.1:2007 is cited by Acceptable Solution G12/AS1: Water Supplies from 10/10/2011
-
G12/AS1 (Amd 12) (Third Edition, Amendment 12)
AS/NZS 2642.1:2007 is cited by Acceptable Solution G12/AS1: Water Supplies from 10/10/2011
-
G12/AS1 (Amd 13) (Third Edition, Amendment 13)
AS/NZS 2642.1:2007 is cited by Acceptable Solution G12/AS1: Water Supplies from 10/10/2011
-
AS/NZS 2642.2:2008
AS/NZS 2642.1:2007 is cited by AS/NZS 2642.2:2008 Polybutylene pipe systems - Polybutylene (PB) pipe for hot and cold water applications
-
AS/NZS 2642.3:2008
AS/NZS 2642.1:2007 is cited by AS/NZS 2642.3:2008 Polybutylene pipe systems - Mechanical jointing fittings for use with polybutylene (PB) pipes for hot and cold water applications
-
AS/NZS 4020:2018
AS/NZS 2642.1:2007 is cited by AS/NZS 4020:2018 Testing of products for use in contact with drinking water
-
NZS 4541:2007
AS/NZS 2642.1:2007 is cited by NZS 4541:2007 Automatic fire sprinkler systems
-
NZS 4541:2013
AS/NZS 2642.1:2007 is cited by NZS 4541:2013 Automatic fire sprinkler systems
-
NZS 4541:2020
AS/NZS 2642.1:2007 is cited by NZS 4541:2020 Automatic fire sprinkler systems
This resource cites:
AS/NZS 2642.1:2007 Polybutylene pipe systems - Polybutylene (PB) pipe extrusion compounds
This document CITES:
New Zealand Standards
-
AS/NZS 1462.14:1996
AS/NZS 2642.1:2007 cites AS/NZS 1462.14:1996 (R2017) Methods of test for plastics pipes and fittings - Method 14: Method for determination of the light transmission of pipe
-
AS/NZS 1462.27:2003
AS/NZS 2642.1:2007 cites AS/NZS 1462.27:2003 (R2017) Methods of test for plastics pipes and fittings - Method 27: Determination of toluene extract of carbon black
-
AS/NZS 1462.6:1998
AS/NZS 2642.1:2007 cites AS/NZS 1462.6:1998 Methods of test for plastics pipes and fittings - Method 6: Method for hydrostatic pressure testing of pipes
-
AS/NZS 3500.0:2003
AS/NZS 2642.1:2007 cites AS/NZS 3500.0:2003 Plumbing and drainage - Glossary of terms
-
AS/NZS 4020:2005
AS/NZS 2642.1:2007 cites AS/NZS 4020:2005 Testing of products for use in contact with drinking water
-
AS/NZS 4131:2003
AS/NZS 2642.1:2007 cites AS/NZS 4131:2003 Polyethylene (PE) compounds for pressure pipes and fittings
-
SANZ/SAA HB 18.28:1991
AS/NZS 2642.1:2007 cites SANZ/SAA HB 18.28:1991 Guidelines for third-party certification and accreditation - Guide 28 - General rules for a model third-party certification system for products
Australian Standards
-
AS 1199.1-2003 (R2016)
AS/NZS 2642.1:2007 cites AS 1199.1-2003 (R2016) Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
Other
-
ASTM D3849-04
AS/NZS 2642.1:2007 cites ASTM D3849-04 Standard test method for carbon black - Morphological characterization of carbon black using electron microscopy
-
ISO 1133:2005
AS/NZS 2642.1:2007 cites ISO 1133:2005 Plastics - Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
-
ISO 11420:1996
AS/NZS 2642.1:2007 cites ISO 11420:1996 Method for the assessment of the degree of carbon black dispersion in polyolefin pipes fittings and compounds
-
ISO 1183-1:2004
AS/NZS 2642.1:2007 cites ISO 1183-1:2004 Immersion method, liquid pyknometer method and titration method
-
ISO 1183-2:2004
AS/NZS 2642.1:2007 cites ISO 1183-2:2004 Plastics. Methods for determining the density of non-cellular plastics. Density gradient column method
-
ISO 1183-3:1999
AS/NZS 2642.1:2007 cites ISO 1183-3:1999 Plastics. Methods for determining the density of non-cellular plastics. Gas pyknometer method
-
ISO 6964:1986
AS/NZS 2642.1:2007 cites ISO 6964:1986 Polyolefin pipes and fittings - Determination of carbon black content by calcination and pyrolysis - Test method and basic specification
-
ISO 9080:2003
AS/NZS 2642.1:2007 cites ISO 9080:2003 Plastics piping and ducting systems - Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation