AS 2159-1995 Rules for the design and installation of piling (known as the SAA Piling Code)
- Abbreviation
- AS 2159-1995
- Amendment
- 1
- Valid from
- 5/08/1995
- Information provider
- Intertek Inform,
- Author
- Standards Australia
- Information type
- Australian Standard,
- Format
- PDF, HARD COPY,
Description
This Standard specifies minimum requirements for the design, calculation and testing of piled foundations for civil engineering and building structures, on land and immediate inshore locations.
Scope
This Standard sets out minimum requirements for the design, construction and testing of piled footings for civil engineering and building structures on land or immediate inshore locations.
It does not extend to offshore (deepwater) construction, or to detached Class 1 building as defined in the Building Code of Australia.
NOTES: 1 AUSTROADS Bridge Design Code should be considered for the design of footings for road bridges.
This resource is cited by:
AS 2159-1995 Rules for the design and installation of piling (known as the SAA Piling Code)
This document is CITED BY:
-
B1/VM4 (Amd 15) (First edition, Amendment 15)
AS 2159-1995 is cited by Verification Method B1/VM4: Foundations from 1/12/2000
-
B1/VM4 (Amd16) (First edition, Amendment 16)
AS 2159-1995 is cited by Verification Method B1/VM4: Foundations from 1/12/2000
-
B1/VM4 (Amd 14) (First edition, Amendment 14)
AS 2159-1995 is cited by Verification Method B1/VM4: Foundations from 1/12/2000
-
B1/VM4 (Amd 13) (First edition, Amendment 13)
AS 2159-1995 is cited by Verification Method B1/VM4: Foundations from 1/12/2000
-
B1/VM4 (Amd 12) (First edition, Amendment 12)
AS 2159-1995 is cited by Verification Method B1/VM4: Foundations from 1/12/2000
-
B1/VM4 (Amd 11) (First edition, Amendment 11)
AS 2159-1995 is cited by Verification Method B1/VM4: Foundations from 1/12/2000
-
B1/VM4 (Amd 10) (First edition, Amendment 10)
AS 2159-1995 is cited by Verification Method B1/VM4: Foundations from 1/12/2000
-
B1/VM4 (Amd 17) (First Edition, Amendment 17)
AS 2159-1995 is cited by Verification Method B1/VM4: Foundations from 1/12/2000
-
B1/VM4 (Amd 18) (First Edition, Amendment 18)
AS 2159-1995 is cited by Verification Method B1/VM4: Foundations from 1/12/2000
-
B1/VM4 (Amd 19) (First edition, Amendment 19)
AS 2159-1995 is cited by Verification Method B1/VM4: Foundations from 1/12/2000
-
B1/VM4 (Amd 20) (First edition, Amendment 20)
AS 2159-1995 is cited by Verification Method B1/VM4: Foundations from 1/12/2000
-
B1/VM4 (Amd 21) (First Edition, Amendment 21)
AS 2159-1995 is cited by Verification Method B1/VM4: Foundations from 1/12/2000
This resource cites:
AS 2159-1995 Rules for the design and installation of piling (known as the SAA Piling Code)
This document CITES:
AS 2159-1995 cites AS/NZS 1554.4:1995 Structural steel welding - Part 4: Welding of high strength quenched and tempered steels
AS 2159-1995 cites AS/NZS 1554.5:1995 Structural steel welding - Part 5: Welding of steel structures subject to high levels of fatigue loading
AS 2159-1995 cites AS/NZS 1554.6:1994 Structural steel welding - Welding stainless steels for structural purposes
AS 2159-1995 cites AS/NZS 2312:1994 Guide to the protection of iron and steel against exterior atmospheric corrosion
AS 2159-1995 cites AS/NZS 3679.1:1996 Structural steel - Part 1: Hot-rolled bars and sections
AS 2159-1995 cites AS 1170.3-1990 Minimum design loads on structures (known as the SAA Loading Code) Snow loads
AS 2159-1995 cites AS 1012.1-1993 Methods of testing concrete - Method 1: Sampling of fresh concrete
AS 2159-1995 cites AS 1012.10-1985 Methods of testing concrete - Method 10: Method for the determination of indirect tensile strength of concrete cylinders ('Brazil' or splitting test)
AS 2159-1995 cites AS 1012.11-1985 Methods of testing concrete - Method 11: Method for the determination of the flexural strength of concrete specimens
AS 2159-1995 cites AS 1012.12-1986 Methods of testing concrete - Method 12: Method for the determination of mass per unit volume of hardened concrete
AS 2159-1995 cites AS 1012.13-1992 Methods of testing concrete - Determination of the drying shrinkage of concrete for samples prepared in the field or in the laboratory
AS 2159-1995 cites AS 1012.14-1991 Methods of testing concrete - Method for securing and testing cores from hardened concrete for compressive strength
AS 2159-1995 cites AS 1012.15-1979 Methods of testing concrete - Method 15: Method for the estimation of portland cement content of hardened concrete
AS 2159-1995 cites AS 1012.16-1974 Methods of testing concrete - Method 16: Method for the determination of creep of concrete cylinders in compression (metric units)
AS 2159-1995 cites AS 1012.17-1976 Methods of testing concrete - Method 17: Methods for the determination of the static chord modulus of elasticity and Poisson's ratio of concrete specimens
AS 2159-1995 cites AS 1012.18-1975 Methods of testing concrete - Method 18: Method for the determination of setting time of fresh concrete, mortar and grout by penetration resistance (metric units)
AS 2159-1995 cites AS 1012.19-1988 Methods of testing concrete - Method 19: Accelerated curing of concrete compression test specimens (laboratory or field) - Hot water and warm water methods
AS 2159-1995 cites AS 1012.2-1994 Methods of testing concrete - Method 2: Preparation of concrete mixes in the laboratory
AS 2159-1995 cites AS 1012.20-1992 Methods of testing concrete - Determination of chloride and sulfate in hardened concrete and concrete aggregates
AS 2159-1995 cites AS 1012.3-1983 Methods of testing concrete - Method 3: Methods for the determination of properties related to the consistence of concrete
AS 2159-1995 cites AS 1012.4-1983 Methods of testing concrete - Method 4: Methods for the determination of air content of freshly mixed concrete
AS 2159-1995 cites AS 1012.5-1983 Methods of testing concrete - Method 5: Method for the determination of mass per unit volume of freshly mixed concrete
AS 2159-1995 cites AS 1012.6-1983 Methods of testing concrete - Method 6: Method for the determination of bleeding of concrete
AS 2159-1995 cites AS 1012.8-1986 Methods of testing concrete - Method 8: Method for making and curing concrete compression, indirect tensile and flexure test specimens, in the laboratory or in the field
AS 2159-1995 cites AS 1012.9-1986 Methods of testing concrete - Method 9: Method for the determination of the compressive strength of concrete specimens
AS 2159-1995 cites AS 1163-1991 Structural steel hollow sections
AS 2159-1995 cites AS 1170.1-1981 Minimum design loads on structures (known as the SAA Loading Code) - Part 1: Dead and live loads
AS 2159-1995 cites AS 1170.2-1989 Minimum design loads on structures (known as the SAA Loading Code) - Wind loads
AS 2159-1995 cites AS 1170.4-1993 Minimum design loads on structures (known as the SAA Loading Code) - Earthquake loads
AS 2159-1995 cites AS 1302-1991 Steel reinforcing bars for concrete
AS 2159-1995 cites AS 1379-1997 Specification and supply of concrete
AS 2159-1995 cites AS 1450-1983 Steel tubes for mechanical purposes
AS 2159-1995 cites AS 1554.1-1985 Structural steel welding (known as the SAA Structural Steel Welding Code) - Part 1: Welding of steel structures
AS 2159-1995 cites AS 1554.2-1993 Structural steel welding - Part 2: Stud welding (steel studs to steel)
AS 2159-1995 cites AS 1554.3-1983 Structural steel welding (known as the SAA Structural Steel Welding Code) - Part 3: Welding of reinforcing steel
AS 2159-1995 cites AS 1579-1993 Arc welded steel pipes and fittings for water and waste water
AS 2159-1995 cites AS 1604-1997 Timber - Preservative-treated - Sawn and round
AS 2159-1995 cites AS 1720.1-1988 Timber structures (known as the SAA Timber Structures Code) - Design methods
AS 2159-1995 cites AS 1726-1993 Geotechnical site investigations
AS 2159-1995 cites AS 2209-1994 Timber - Poles for overhead lines
AS 2159-1995 cites AS 2701.2-1984 Methods of sampling and testing mortar for masonry construction - Part 2: Methods of sampling
AS 2159-1995 cites AS 2832.2-1991 Cathodic protection of metals - Part 2: Compact buried structures
AS 2159-1995 cites AS 2832.3-1992 Cathodic protection of metals - Part 3: Fixed immersed structures
AS 2159-1995 cites AS 3600-1994 Concrete structures
AS 2159-1995 cites AS 3678-1990 Structural steel - Hot-rolled plates, floorplates and slabs
AS 2159-1995 cites AS 3679.2-1991 Structural steel - Part 2: Welded sections
AS 2159-1995 cites AS 3972-1997 General purpose and blended cements
AS 2159-1995 cites AS 4100-1990 Steel structures
AS 2159-1995 cites Bridge Design Code