AS 1012.13-1992 Methods of testing concrete - Determination of the drying shrinkage of concrete for samples prepared in the field or in the laboratory

Abbreviation
AS 1012.13-1992
Amendment
AS 1012.13-1992/Amdt 1-1993
Valid from
15/05/1992

Information provider
Intertek Inform,
Information type
Australian Standard,
Format
PDF, HARD COPY,


Description

This Standards sets out a method for determining the drying shrinkage of concrete. Generally similar to the 1970 edition, except that the differences between field and laboratory prepared specimens has been emphasized.

Scope

This Standard sets out a method for preparing and curing of concrete shrinkage specimens, and for determining the length changes of these specimens due to drying in air. It provides for testing of specimens prepared in the laboratory or in the field, in which the nominal size of aggregate in the concrete, in accordance with AS 2758.1, does not exceed 40 mm. The precision statement in Clause 9 does not apply to specimens which have had non-standard initial curing (normally field-prepared specimens). In addition this Standard requires that field-prepared specimens are marked, recorded and reported as such.

Notes: This test method is not always suitable for very low slump concrete (less than 20 mm), primarily due to the difficulties in obtaining adequate compaction. Provided adequate compaction is obtained, the method is applicable. The method is specifically designed for measurement of drying shrinkage of concrete, but it is capable of adaptation for measurement of length changes of specimens subjected to a variety of environmental conditions.

For assistance with locating previous versions, please contact the information provider.
View on Information Provider website
For assistance with locating previous versions, please contact the information provider.
This resource is cited by:

AS 1012.13-1992 Methods of testing concrete - Determination of the drying shrinkage of concrete for samples prepared in the field or in the laboratory

This document is CITED BY:

AS 1012.13-1992 Methods of testing concrete - Determination of the drying shrinkage of concrete for samples prepared in the field or in the laboratory

Description

This Standards sets out a method for determining the drying shrinkage of concrete. Generally similar to the 1970 edition, except that the differences between field and laboratory prepared specimens has been emphasized.

View on Information Provider website
AS 1012.13-1992 Methods of testing concrete - Determination of the drying shrinkage of concrete for samples prepared in the field or in the laboratory
Description

This Standards sets out a method for determining the drying shrinkage of concrete. Generally similar to the 1970 edition, except that the differences between field and laboratory prepared specimens has been emphasized.

View on Information Provider website
This resource does not cite any other resources.

AS 1012.13-1992 Methods of testing concrete - Determination of the drying shrinkage of concrete for samples prepared in the field or in the laboratory

This resource does not CITE any other resources.
Feedback