AS 1391-2007 (R2017) Metallic materials - Tensile testing at ambient temperature | Building CodeHub

Resource detail

AS 1391-2007 (R2017) Metallic materials - Tensile testing at ambient temperature

View on Information Provider website

Abbreviation: AS 1391-2007
Version: Reconfirmed in 2017
Valid from: 12/07/2007

Information provider: SAI Global
Author: Standards Australia
Information type: Australian Standard
Format: PDF, Hard copy

Cited By: This resource is cited by 12 documents (show Citations)
Cites: This resource cites 4 documents (show Citations)

Description

This Standard specifies methods by which a test piece of metal is strained in uni-axial tension at room temperature in order to determine one or more of its tensile properties. It defines the properties to be determined and the terms used in describing tests and test pieces.

The Standard also specifies the dimensions of standard test pieces and methods for tensile testing a wide range of product forms. Where material Standards (product Standards) specify the dimensions of the test piece, those dimensions take precedence over the dimensions which are specified in Appendices A and C.

For assistance with locating previous versions, please contact the information provider.

View on Information Provider website

For assistance with locating previous versions, please contact the information provider.

This resource is cited by:

AS 1391-2007 (R2017) Metallic materials - Tensile testing at ambient temperature

This document is CITED BY:

B1/VM1 (First edition, Amendment 14)

AS 1391-2007 is cited by Verification Method B1/VM1: Structure - General from 4/11/2016
B1/VM1 (First edition, amendment 15)

AS 1391-2007 is cited by Verification Method B1/VM1: Structure - General from 4/11/2016
B1/VM1 (First Edition, Amendment 17)

AS 1391-2007 is cited by Verification Method B1/VM1: Structure - General from 4/11/2016
B1/VM1 (First edition, Amendment 16 )

AS 1391-2007 is cited by Verification Method B1/VM1: Structure - General from 4/11/2016
B1/VM1 (First Edition, Amendment 18)

AS 1391-2007 is cited by Verification Method B1/VM1: Structure - General from 4/11/2016
B1/VM1 (First edition, Amendment 19))

AS 1391-2007 is cited by Verification Method B1/VM1: Structure - General from 4/11/2016
AS 1397-2011

AS 1391-2007 is cited by AS 1397-2011 Continuous hot-dip metallic coated steel sheet and strip - Coatings of zinc and zinc alloyed with aluminium and magnesium
AS/NZS 1163:2016

AS 1391-2007 is cited by AS/NZS 1163:2016 Cold-formed structural steel hollow sections
AS/NZS 2280:2014

AS 1391-2007 is cited by AS/NZS 2280:2014 Ductile iron pipes and fittings
AS/NZS 3678:2016

AS 1391-2007 is cited by AS/NZS 3678:2016 Structural steel - Hot-rolled plates, floorplates and slabs
AS/NZS 3679.1:2016

AS 1391-2007 is cited by AS/NZS 3679.1:2016 Structural steel - Part 1: Hot-rolled bars and sections
AS/NZS 3679.2:2016

AS 1391-2007 is cited by AS/NZS 3679.2:2016 Structural steel - Part 2: Welded I-sections

AS 1391-2007 (R2017) Metallic materials - Tensile testing at ambient temperature

Description

This Standard specifies methods by which a test piece of metal is strained in uni-axial tension at room temperature in order to determine one or more of its tensile properties. It defines the properties to be determined and the terms used in describing tests and test pieces.

The Standard also specifies the dimensions of standard test pieces and methods for tensile testing a wide range of product forms. Where material Standards (product Standards) specify the dimensions of the test piece, those dimensions take precedence over the dimensions which are specified in Appendices A and C.

View on Information Provider website

AS 1391-2007 (R2017) Metallic materials - Tensile testing at ambient temperature

Description

This Standard specifies methods by which a test piece of metal is strained in uni-axial tension at room temperature in order to determine one or more of its tensile properties. It defines the properties to be determined and the terms used in describing tests and test pieces.

The Standard also specifies the dimensions of standard test pieces and methods for tensile testing a wide range of product forms. Where material Standards (product Standards) specify the dimensions of the test piece, those dimensions take precedence over the dimensions which are specified in Appendices A and C.

View on Information Provider website

This resource cites:

AS 1391-2007 (R2017) Metallic materials - Tensile testing at ambient temperature

This document CITES:

Australian Standards

AS 1545-1976 (R2017)

AS 1391-2007 cites AS 1545-1976 (R2017): Methods for the calibration and grading of extensometers
AS 2193-2005

AS 1391-2007 cites AS 2193-2005 (R2017) Calibration and classification of force-measuring systems
ISO 2566-2:1984

AS 1391-2007 cites ISO 2566-2:1984: Steel - Conversion of elongation values Part 2: Austenitic Steel

Other

ISO 2566-1:1984

AS 1391-2007 cites ISO 2566-1:1984 Carbon and low alloy steels

Feedback