NZS 4607:1989 Installation of thermal storage electric water heaters: valve vented systems - SPONSORED | Building CodeHub

Resource detail

NZS 4607:1989 Installation of thermal storage electric water heaters: valve vented systems - SPONSORED

View on Information Provider website

Abbreviation: NZS 4607:1989
Valid from: 27/02/1990

Information provider: Standards New Zealand
Author: Standards New Zealand
Information type: New Zealand Standard
Format: PDF, HARD COPY

Cited By: This resource is cited by 13 documents (show Citations)
Cites: This resource cites 13 documents (show Citations)

Description

This Standard applies to installation in domestic and light commercial establishments of thermal storage water heaters complying with NZS 4602 and NZS 4606 fitted with a pressure relief valve instead of an open vent. (For open vented systems see NZS 4603.)

Scope

This New Zealand Standard applies to the installation in the vertical position of thermal storage electric water heaters complying with NZS 4602 and NZS 4606. It is restricted to valve vented systems for domestic and light commercial use.

For assistance with locating previous versions, please contact the information provider.

Notes/comments

The Building System Performance branch of MBIE has sponsored access to view and print a single downloadable PDF copy of this standard at no charge.

View on Information Provider website

For assistance with locating previous versions, please contact the information provider.

The Building System Performance branch of MBIE has sponsored access to view and print a single downloadable PDF copy of this standard at no charge.

This resource is cited by:

NZS 4607:1989 Installation of thermal storage electric water heaters: valve vented systems - SPONSORED

This document is CITED BY:

G12/AS1 (Third Edition, Amendment 10)

NZS 4607:1989 is cited by Acceptable Solution G12/AS1: Water Supplies from 1/12/2007
G12/AS1 (Third Edition, Amendment 9)

NZS 4607:1989 is cited by Acceptable Solution G12/AS1: Water Supplies from 1/12/2007
G12/AS1 (Third Edition, Amendment 8)

NZS 4607:1989 is cited by Acceptable Solution G12/AS1: Water Supplies from 1/12/2007
G12/AS1 (Third Edition, Amendment 7)

NZS 4607:1989 is cited by Acceptable Solution G12/AS1: Water Supplies from 1/12/2007
G12/AS1 (Third Edition, Amendment 11)

NZS 4607:1989 is cited by Acceptable Solution G12/AS1: Water Supplies from 1/12/2007
G12/AS1 (Amd 12) (Third Edition, Amendment 12)

NZS 4607:1989 is cited by Acceptable Solution G12/AS1: Water Supplies from 1/12/2007
G12/AS1 (Amd 13) (Third Edition, Amendment 13)

NZS 4607:1989 is cited by Acceptable Solution G12/AS1: Water Supplies from 1/12/2007
AS/NZS 3500.4:2003

NZS 4607:1989 is cited by AS/NZS 3500.4:2003 Plumbing and drainage - Part 4: Heated water services
AS/NZS 3500.4:2015

NZS 4607:1989 is cited by AS/NZS 3500.4:2015 Plumbing and drainage - Heated water services
AS/NZS 3500.4:2018

NZS 4607:1989 is cited by AS/NZS 3500.4:2018 Plumbing and drainage Part 4: Heated water services
AS/NZS 3500.4:2021

NZS 4607:1989 is cited by AS/NZS 3500.4:2021 Plumbing and drainage Part 4: Heated water services
NZS 4602:1988

NZS 4607:1989 is cited by NZS 4602:1988 Low pressure copper thermal storage electric water heaters - SPONSORED
NZS 4606.1:1989

NZS 4607:1989 is cited by NZS 4606.1:1989 Storage water heaters - General requirements - SPONSORED

NZS 4607:1989 Installation of thermal storage electric water heaters: valve vented systems - SPONSORED

Description

This Standard applies to installation in domestic and light commercial establishments of thermal storage water heaters complying with NZS 4602 and NZS 4606 fitted with a pressure relief valve instead of an open vent. (For open vented systems see NZS 4603.)

View on Information Provider website

NZS 4607:1989 Installation of thermal storage electric water heaters: valve vented systems - SPONSORED

Description

This Standard applies to installation in domestic and light commercial establishments of thermal storage water heaters complying with NZS 4602 and NZS 4606 fitted with a pressure relief valve instead of an open vent. (For open vented systems see NZS 4603.)

View on Information Provider website

This resource cites:

NZS 4607:1989 Installation of thermal storage electric water heaters: valve vented systems - SPONSORED

This document CITES:

New Zealand Standards

NZS 3501:1976

NZS 4607:1989 cites NZS 3501:1976 Specification for copper tubes for water, gas, and sanitation - SPONSORED
NZS 4222:1992

NZS 4607:1989 cites NZS 4222:1992 Specification for materials for the thermal insulation of buildings
NZS 4602:1988

NZS 4607:1989 cites NZS 4602:1988 Low pressure copper thermal storage electric water heaters - SPONSORED
NZS 4606.1:1989

NZS 4607:1989 cites NZS 4606.1:1989 Storage water heaters - General requirements - SPONSORED
NZS 4606.2:1989

NZS 4607:1989 cites NZS 4606.2:1989 Storage water heaters - Specific requirements for water heaters with single shells
NZS 4606.3:1989

NZS 4607:1989 cites NZS 4606.3:1989 Storage water heaters - Part 3: Specific requirements for water heaters with composite shells
NZS 4608:1992

NZS 4607:1989 cites NZS 4608:1992 Control valves for hot water systems - SPONSORED
NZS 4617:1989

NZS 4607:1989 cites NZS 4617:1989 Tempering (3-port mixing) valves - SPONSORED
NZS 6214:1988

NZS 4607:1989 cites NZS 6214:1988 Thermostats and thermal cutouts for domestic thermal storage electric water heaters (alternating current only) - SPONSORED
NZS 918:1965

NZS 4607:1989 cites NZS 918:1965 Immersion heaters for thermal storage electric water heaters

Australian Standards

AS 1530.3-1982

NZS 4607:1989 cites AS 1530.3-1982 Methods for fire tests on building materials and structures - Part 3: Test for early fire hazard properties of materials

Other

BS 1845:1984

NZS 4607:1989 cites BS 1845:1984 Specification for filler metals for brazing
BS 874:1973

NZS 4607:1989 cites BS 874:1973 Methods for determining thermal insulating properties with definitions of thermal insulating terms

Feedback