AS 21591995 Rules for the design and installation of piling (known as the SAA Piling Code)
 Abbreviation
 AS 21591995
 Amendment
 1
 Valid from
 05/08/1995
 Information provider
 SAI Global
 Author
 Standards Australia
 Information type
 Australian Standard
 Format
Description
This Standard specifies minimum requirements for the design, calculation and testing of piled foundations for civil engineering and building structures, on land and immediate inshore locations.
Scope
This Standard sets out minimum requirements for the design, construction and testing of piled footings for civil engineering and building structures on land or immediate inshore locations.
It does not extend to offshore (deepwater) construction, or to detached Class 1 building as defined in the Building Code of Australia.
NOTES: 1 AUSTROADS Bridge Design Code should be considered for the design of footings for road bridges.
This resource is cited by:
AS 21591995 Rules for the design and installation of piling (known as the SAA Piling Code)
This document is CITED BY:

B1/VM4 (First edition, Amendment 11)
AS 21591995 is cited by Verification Method B1/VM4: Foundations from 01/12/2000

B1/VM4 (First Edition, Amendment 18)
AS 21591995 is cited by Verification Method B1/VM4: Foundations from 01/12/2000

B1/VM4 (First edition, Amendment 15)
AS 21591995 is cited by Verification Method B1/VM4: Foundations from 01/12/2000

B1/VM4 (First edition, Amendment 13)
AS 21591995 is cited by Verification Method B1/VM4: Foundations from 01/12/2000

B1/VM4 (First edition, Amendment 10)
AS 21591995 is cited by Verification Method B1/VM4: Foundations from 01/12/2000

B1/VM4 (First edition, Amendment 19)
AS 21591995 is cited by Verification Method B1/VM4: Foundations from 01/12/2000

B1/VM4 (First edition, Amendment 16)
AS 21591995 is cited by Verification Method B1/VM4: Foundations from 01/12/2000

B1/VM4 (First edition, Amendment 12)
AS 21591995 is cited by Verification Method B1/VM4: Foundations from 01/12/2000

B1/VM4 (First Edition, Amendment 17)
AS 21591995 is cited by Verification Method B1/VM4: Foundations from 01/12/2000

B1/VM4 (First edition, Amendment 14)
AS 21591995 is cited by Verification Method B1/VM4: Foundations from 01/12/2000
This resource cites:
AS 21591995 Rules for the design and installation of piling (known as the SAA Piling Code)
This document CITES:
New Zealand Standards

AS/NZS 1554.4:1995
AS 21591995 cites AS/NZS 1554.4:1995 Structural steel welding  Part 4: Welding of high strength quenched and tempered steels

AS/NZS 1554.5:1995
AS 21591995 cites AS/NZS 1554.5:1995 Structural steel welding  Part 5: Welding of steel structures subject to high levels of fatigue loading

AS/NZS 1554.6:1994
AS 21591995 cites AS/NZS 1554.6:1994 Structural steel welding  Welding stainless steels for structural purposes

AS/NZS 2312:1994
AS 21591995 cites AS/NZS 2312:1994 Guide to the protection of iron and steel against exterior atmospheric corrosion

AS/NZS 3679.1:1996
AS 21591995 cites AS/NZS 3679.1:1996 Structural steel  Part 1: Hotrolled bars and sections
Australian Standards

AS 1170.31990
AS 21591995 cites AS 1170.31990 Minimum design loads on structures (known as the SAA Loading Code) Snow loads

AS 1012.11993
AS 21591995 cites AS 1012.11993 Methods of testing concrete  Method 1: Sampling of fresh concrete

AS 1012.101985
AS 21591995 cites AS 1012.101985 Methods of testing concrete  Method 10: Method for the determination of indirect tensile strength of concrete cylinders ('Brazil' or splitting test)

AS 1012.111985
AS 21591995 cites AS 1012.111985 Methods of testing concrete  Method 11: Method for the determination of the flexural strength of concrete specimens

AS 1012.121986
AS 21591995 cites AS 1012.121986 Methods of testing concrete  Method 12: Method for the determination of mass per unit volume of hardened concrete

AS 1012.131992
AS 21591995 cites AS 1012.131992 Methods of testing concrete  Determination of the drying shrinkage of concrete for samples prepared in the field or in the laboratory

AS 1012.141991
AS 21591995 cites AS 1012.141991 Methods of testing concrete  Method for securing and testing cores from hardened concrete for compressive strength

AS 1012.151979
AS 21591995 cites AS 1012.151979 Methods of testing concrete  Method 15: Method for the estimation of portland cement content of hardened concrete

AS 1012.161974
AS 21591995 cites AS 1012.161974 Methods of testing concrete  Method 16: Method for the determination of creep of concrete cylinders in compression (metric units)

AS 1012.171976
AS 21591995 cites AS 1012.171976 Methods of testing concrete  Method 17: Methods for the determination of the static chord modulus of elasticity and Poisson's ratio of concrete specimens

AS 1012.181975
AS 21591995 cites AS 1012.181975 Methods of testing concrete  Method 18: Method for the determination of setting time of fresh concrete, mortar and grout by penetration resistance (metric units)

AS 1012.191988
AS 21591995 cites AS 1012.191988 Methods of testing concrete  Method 19: Accelerated curing of concrete compression test specimens (laboratory or field)  Hot water and warm water methods

AS 1012.21994
AS 21591995 cites AS 1012.21994 Methods of testing concrete  Method 2: Preparation of concrete mixes in the laboratory

AS 1012.201992
AS 21591995 cites AS 1012.201992 Methods of testing concrete  Determination of chloride and sulfate in hardened concrete and concrete aggregates

AS 1012.31983
AS 21591995 cites AS 1012.31983 Methods of testing concrete  Method 3: Methods for the determination of properties related to the consistence of concrete

AS 1012.41983
AS 21591995 cites AS 1012.41983 Methods of testing concrete  Method 4: Methods for the determination of air content of freshly mixed concrete

AS 1012.51983
AS 21591995 cites AS 1012.51983 Methods of testing concrete  Method 5: Method for the determination of mass per unit volume of freshly mixed concrete

AS 1012.61983
AS 21591995 cites AS 1012.61983 Methods of testing concrete  Method 6: Method for the determination of bleeding of concrete

AS 1012.81986
AS 21591995 cites AS 1012.81986 Methods of testing concrete  Method 8: Method for making and curing concrete compression, indirect tensile and flexure test specimens, in the laboratory or in the field

AS 1012.91986
AS 21591995 cites AS 1012.91986 Methods of testing concrete  Method 9: Method for the determination of the compressive strength of concrete specimens

AS 11631991
AS 21591995 cites AS 11631991 Structural steel hollow sections

AS 1170.11981
AS 21591995 cites AS 1170.11981 Minimum design loads on structures (known as the SAA Loading Code)  Part 1: Dead and live loads

AS 1170.21989
AS 21591995 cites AS 1170.21989 Minimum design loads on structures (known as the SAA Loading Code)  Wind loads

AS 1170.41993
AS 21591995 cites AS 1170.41993 Minimum design loads on structures (known as the SAA Loading Code)  Earthquake loads

AS 13021991
AS 21591995 cites AS 13021991 Steel reinforcing bars for concrete

AS 13791997
AS 21591995 cites AS 13791997 Specification and supply of concrete

AS 14501983
AS 21591995 cites AS 14501983 Steel tubes for mechanical purposes

AS 1554.11985
AS 21591995 cites AS 1554.11985 Structural steel welding (known as the SAA Structural Steel Welding Code)  Part 1: Welding of steel structures

AS 1554.21993
AS 21591995 cites AS 1554.21993 Structural steel welding  Part 2: Stud welding (steel studs to steel)

AS 1554.31983
AS 21591995 cites AS 1554.31983 Structural steel welding (known as the SAA Structural Steel Welding Code)  Part 3: Welding of reinforcing steel

AS 15791993
AS 21591995 cites AS 15791993 Arc welded steel pipes and fittings for water and waste water

AS 16041997
AS 21591995 cites AS 16041997 Timber  Preservativetreated  Sawn and round

AS 1720.11988
AS 21591995 cites AS 1720.11988 Timber structures (known as the SAA Timber Structures Code)  Design methods

AS 17261993
AS 21591995 cites AS 17261993 Geotechnical site investigations

AS 22091994
AS 21591995 cites AS 22091994 Timber  Poles for overhead lines

AS 2701.21984
AS 21591995 cites AS 2701.21984 Methods of sampling and testing mortar for masonry construction  Part 2: Methods of sampling

AS 2832.21991
AS 21591995 cites AS 2832.21991 Cathodic protection of metals  Part 2: Compact buried structures

AS 2832.31992
AS 21591995 cites AS 2832.31992 Cathodic protection of metals  Part 3: Fixed immersed structures

AS 36001994
AS 21591995 cites AS 36001994 Concrete structures

AS 36781990
AS 21591995 cites AS 36781990 Structural steel  Hotrolled plates, floorplates and slabs

AS 3679.21991
AS 21591995 cites AS 3679.21991 Structural steel  Part 2: Welded sections

AS 39721997
AS 21591995 cites AS 39721997 General purpose and blended cements

AS 41001990
AS 21591995 cites AS 41001990 Steel structures
Other

AUSTROADS  Bridge Design Code
AS 21591995 cites Bridge Design Code