Skip to main content Skip to primary navigation
Resource detail
Citations

ISO 13789:2017 Thermal performance of buildings — Transmission and ventilation heat transfer coefficients — Calculation method

View on Information Provider website
Abbreviation
ISO 13789:2017
Valid from
21/06/2017
Information provider
Standards New Zealand,
Author
International Organization for Standardization
Information type
ISO Standard,
Cited By
This resource is cited by 8 documents (show Citations)
Cites
This resource cites 8 documents (show Citations)
Description

This Standard specifies a method and provides conventions for the calculation of the steady‐state transmission and ventilation heat transfer coefficients of whole buildings and parts of buildings.

It is applicable both to heat loss (internal temperature higher than external temperature) and to heat gain (internal temperature lower than external temperature). For the purpose of ISO 13789:2017, the heated or cooled space is assumed to be at uniform temperature.

Annex C provides a steady‐state method to calculate the temperature in unconditioned spaces adjacent to conditioned spaces.

NOTE: Table 1 in the Introduction shows the relative position of ISO 13789:2017 within the set of EPB standards in the context of the modular structure as set out in ISO 52000-1.

For assistance with locating previous versions, please contact the information provider.
View on Information Provider website
For assistance with locating previous versions, please contact the information provider.
This resource is cited by:

ISO 13789:2017 Thermal performance of buildings — Transmission and ventilation heat transfer coefficients — Calculation method

This document is CITED BY:

ISO 13789:2017 Thermal performance of buildings — Transmission and ventilation heat transfer coefficients — Calculation method

Description

This Standard specifies a method and provides conventions for the calculation of the steady‐state transmission and ventilation heat transfer coefficients of whole buildings and parts of buildings.

It is applicable both to heat loss (internal temperature higher than external temperature) and to heat gain (internal temperature lower than external temperature). For the purpose of ISO 13789:2017, the heated or cooled space is assumed to be at uniform temperature.

Annex C provides a steady‐state method to calculate the temperature in unconditioned spaces adjacent to conditioned spaces.

NOTE: Table 1 in the Introduction shows the relative position of ISO 13789:2017 within the set of EPB standards in the context of the modular structure as set out in ISO 52000-1.

View on Information Provider website
ISO 13789:2017 Thermal performance of buildings — Transmission and ventilation heat transfer coefficients — Calculation method
Description

This Standard specifies a method and provides conventions for the calculation of the steady‐state transmission and ventilation heat transfer coefficients of whole buildings and parts of buildings.

It is applicable both to heat loss (internal temperature higher than external temperature) and to heat gain (internal temperature lower than external temperature). For the purpose of ISO 13789:2017, the heated or cooled space is assumed to be at uniform temperature.

Annex C provides a steady‐state method to calculate the temperature in unconditioned spaces adjacent to conditioned spaces.

NOTE: Table 1 in the Introduction shows the relative position of ISO 13789:2017 within the set of EPB standards in the context of the modular structure as set out in ISO 52000-1.

View on Information Provider website
This resource cites:

ISO 13789:2017 Thermal performance of buildings — Transmission and ventilation heat transfer coefficients — Calculation method

This document CITES:
Feedback