Acceptable Solution G13/AS2: Drainage
- Abbreviation
- G13/AS2
- Amendment
- 4
- Version
- Second Edition, Amendment 4
- Valid to
- 14/08/2014
- Valid from
- 10/10/2011
This resource is no longer current. G13/AS2 (Amd 10) (Second Edition, Amendment 10),
- Information provider
- Ministry of Business, Innovation and Employment,
- Information type
- Acceptable Solution,
- Format
- PDF,
Description
Acceptable Solution G13/AS2 provides a means of compliance with parts of Building Code Clause G13 Foul water, in particular below ground drainage. Clause G13 requires the safe disposal of foul water to prevent illness and the loss of amenity due to odour and accumulated matter.
Under this clause, buildings in which sanitary fixtures and sanitary appliances using water-borne waste disposal are installed must be provided with adequate plumbing and drainage to appropriate outfalls or system for storage/treatment. This safeguards people from infection or contamination of the water supply.
It sets out requirements for the construction of plumbing systems and protects against loss of amenity due to odour or accumulation of offensive matter from foul water disposal.
Scope
This Acceptable Solution is for below ground non-pressure (gravity flow) foul water drains having a diameter of no greater than 150 mm.
It does not apply to foul water drainage systems where it is necessary to dispose of industrial liquid wastes, chemical or toxic wastes and other wastes which cannot be discharged to a sewer without pre-treatment.
This resource is not cited by any other resources.
Acceptable Solution G13/AS2: Drainage
This document is not CITED BY any other resources:
This resource cites:
Acceptable Solution G13/AS2: Drainage
This document CITES:
G13/AS2 cites AS/NZS 1260:2009 PVC-U Pipes and fittings for drain, waste and vent applications from 10/10/2011
G13/AS2 cites AS/NZS 2032:2006 Installation of PVC pipe systems from 30/09/2010
G13/AS2 cites AS/NZS 2280:2004 Ductile iron pipes and fittings from 10/10/2011
G13/AS2 cites AS/NZS 2566.2:2002 (R2016) Buried Flexible pipelines - Installation from 10/10/2011
G13/AS2 cites AS/NZS 3500.2:2003 Plumbing and drainage - Sanitary plumbing and drainage from 23/06/2007
G13/AS2 cites AS/NZS 3518:2004 Acrylonitrile butadiene styrene (ABS) compounds, pipes and fittings for pressure applications from 30/09/2010
G13/AS2 cites AS/NZS 4058:2007 Pre cast concrete pipes (pressure and non-pressure) from 30/09/2010
G13/AS2 cites AS/NZS 4130:2009 Polyethylene (PE) pipes for pressure applications from 30/09/2010
G13/AS2 cites AS/NZS 5065:2005 (R2016) Polyethylene and polypropylene pipes and fittings for drainage and sewerage applications from 10/10/2011
G13/AS2 cites NZS 3501:1976 Specification for copper tubes for water, gas, and sanitation - SPONSORED from 1/10/2001
G13/AS2 cites NZS 3604:1999 Timber framed buildings - SPONSORED from 1/07/2001
G13/AS2 cites NZS 4229:1999 Concrete masonry buildings not requiring specific engineering design - SPONSORED from 1/07/2001
G13/AS2 cites NZS 4442:1988 Welded steel pipes and fittings for water, sewage and medium pressure gas - SPONSORED from 1/10/2001
G13/AS2 cites AS 1579-2001 (R2018) Arc welded steel pipes and fittings for water and waste water from 30/09/2010
G13/AS2 cites AS 1646-2007 (R2018) Elastomeric seals for waterworks purposes from 30/09/2010
G13/AS2 cites AS 3571.1-2009 Plastics piping systems - Glass-reinforced thermoplastics (GRP) systems based on unsaturated polyester (UP) resin. Part 1: Pressure and non-pressure drainage and sewerage (ISO 10467:2004 MOD) from 10/10/2011
G13/AS2 cites AS 4139-2003 (R2018) Fibre reinforced concrete pipes and fittings from 30/09/2010
G13/AS2 cites BS 437:2008 Specification for cast iron drain pipes and fittings and their joints for socketed and socketless systems from 1/10/2001